Design of impulse jet generators based on structural synthesis

Authors

DOI:

https://doi.org/10.15587/1729-4061.2014.26048

Keywords:

generator, impulse jet, structural synthesis, element, mathematical model, experiment, adequacy, design

Abstract

Experience in designing devices that generate impulse jets, mainly for the mining industry for working thin coal seams, well-boring, formation of stables allows to perform some generalizations, create a block diagram with its sufficiently detailed description. Basic elements of this diagram are systemized and have a mathematical description. In order to combine the elements into a system, the connection equation is developed. A mathematical model of the system is the motion equation of masses (pistons, valves, plungers, distributor components, etc.), the wave equation of unsteady flow in the connecting lines, the ratios for variable hydraulic resistances and equation of the pressure ratio in the connected hydraulic chambers of the system. Based on the mathematical model, the simulation model, reflecting the main hydrodynamic processes in all the system elements was developed. In order to verify its adequacy, a bench experiment is held, and comparison of the data obtained is performed. The comparison was carried out by both time indices of the workflow (depending on pressures in the characteristic points of time), and basic integral indicators - equivalent pressure in the impulse, impulse repetition rate, system efficiency. Analysis of the results has shown that the prediction error of the workflow using the mathematical model is in the range of from 10 % to 15.4 %, which is acceptable for engineering studies. The data obtained allow to use the block diagram, schematic diagrams of a set of possible elements, its components and their mathematical description for the system of computer-aided design of impulse jet generators. This is the basis for selecting the optimum and rational parameters when creating new diagrams for different applications of impulse jets.

Author Biographies

Валерий Валентинович Гулин, Donetsk National Technical University Artyom Str. 58, Donetsk, Ukraine, 83000

Senior teacher

Department of Power Systems

Татьяна Алексеевна Устименко, Donetsk National Technical University Artyom Str. 58, Donetsk, Ukraine, 83000

Associate Professor

Department of Power Systems

References

  1. Trofimov, V. P. (1969). Manless Coal Mining. Kiew, USSR: Tekhnika, 220.
  2. Kodentsov, A. Y. (1984). Hydrotechnologies on Mines. Moscow, USSR, 320.
  3. Muchnik, V. S., Markus, M. N., Golland, E. B. (1986). Hydraulic Under-ground Coal Mining. Moscow, USSR: Nedra, 223.
  4. Ekber, B. Y. (1968). Hydraulic Mining of Coal in the U.S. Hydraulic Coal Mining, 1 (52)
  5. Ekber, B. Y., Markus, M. N. (1989). Analysis and Development of Technical and Economic Efficiency of Hydraulic Coal Mining, 57.
  6. Timoshenko, G. M., Bugrik, V. A. (1989). Hydroimpuls Breaking is a Promising Method of Coal Extraction in the Mines with Conventional Technology. Coal of Ukraine, 13–14.
  7. Bugrik, V. A. (1989). Hydraulic Pulse Destruction Of Massif. Mining journal, 3, 21–24.
  8. Timoshenko, G. M, Gulin, V. V., Timoshenko, V. G., Selivra, S. A. (1991). Hydraulic Device. Patent of Ukraine № 6173.
  9. Yatsenko, A. F., Selivra, S. A., Gulin, V. V., Kreschenko, A. N., Triller, E. N. (1987). Roadheader With Shock-Jet Executive Body. Mining, 78, 26–32.
  10. Kichigin, A. F., Ignativ, S. N., Lazutkin, A. G.,Yanzen, I. A. (1972). Me-chanical Destruction Of Rocks With Combined Method, 256.
  11. Hudin, Y. L., Markman, L. D., Vareha, Z. P., Tsoy, P. M. (1978). Destruction Of Rocks With Combined Executive Bodies. Moscow, USSR: Nedra, 224.
  12. Rakishev, B. R., Shestyuk, B. F., Stiron, B. K., Yastrebov, E. K. (1985). The Issue Of Rock Destruction With Combined Executive Bodies. Physical and technical problems of mining, 6, 105–109.
  13. Nebeker Euqene, B. (1984). Potincial an problems of rapidly pulsing water jets .7th Int. Symp. Jet Gutting Technol. Ottawa. Granfield, 51-68.
  14. Fun-Den, Wang, Mou, Heng-da, Bao, Zhe-sheng, Daz hong cheng (1984). Field Applications of Pulse and Swing-Oscillating Jets for Coal Mine Entry Driving. 7 th Jnt. Symp. Jet Cutting Technol., Ottawa. Granfield, 72–85.
  15. Labus, T. I. (1982). A comparison of pulsed jets versus mechanikal breakers.Gth Int. Symp.Iet Cutt.Technol., Guildford.Granfield, 229–240.
  16. Dihtyar, A. A., Krivoruchko, A. M., Gritzenko, V. V., Aleksyuk, F. V. (1976). Prospects Of Application Ultra-High Pressure Pulsed Jets To Break The Strong Outburst Rocks. emissions of coal, rock and gas. Kiew, USSR, 147–152.
  17. Bashta, T. M. (1961). Calculations And Design Of Aircraft Hydraulic Systems. Moscow, USSR: Mashinostroeniye, 475.
  18. Abramov, E. N., Kolesnichenko, K. A., Maslov, V. T. (1969). Hydraulic Drive Elements. Kiew, USSR: Technika, 320.
  19. Giyon, M. (1982). Research And Calculation Of Hydraulic Systems. Moscow, USSR: Mashinostroeniye, 423.
  20. Geyer, V. G., Dulin, V. S., Zarya, A. N. (1991). Hydraulics And Hydraulic Systems. Moscow, USSR: Nedra. 331.

Downloads

Published

2014-07-24

How to Cite

Гулин, В. В., & Устименко, Т. А. (2014). Design of impulse jet generators based on structural synthesis. Eastern-European Journal of Enterprise Technologies, 4(7(70), 38–45. https://doi.org/10.15587/1729-4061.2014.26048

Issue

Vol. 4 No. 7(70) (2014): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Валерий Валентинович Гулин, Татьяна Алексеевна Устименко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.