Thermal protection of the contact system of electrotransport

Authors

  • А.Н. Толстиков Харьковский национальный университет радиоэлектроники, Ukraine
  • Н.Г. Толстиков Кафедра информатики Харьковский гуманитарно-технический институт, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2010.2698

Keywords:

device of defence, contact wire, short circuit, overload, annealing

Abstract

The functional diagram of dilatometric device of defence of contact system was described. The formula for definition of a course of a thermosensitive element of defence was received.

Author Biography

Н.Г. Толстиков, Кафедра информатики Харьковский гуманитарно-технический институт

Кандидат технических наук, заведующий кафедрой

References

  1. Тырса В.Е., Толстиков Н.Г. Механический расчет дилатометрического устройства защиты контактной сети// Вестник ХГАДТУ, 1995, №1, с. 64-68.

Downloads

Published

2010-04-06

How to Cite

Толстиков, А., & Толстиков, Н. (2010). Thermal protection of the contact system of electrotransport. Eastern-European Journal of Enterprise Technologies, 2(7(44), 30–32. https://doi.org/10.15587/1729-4061.2010.2698

Issue

Vol. 2 No. 7(44) (2010): Energy saving technologies and equipment

Section

Energy-saving technologies and equipment

License

Copyright (c) 2014 А.Н. Толстиков, Н.Г. Толстиков

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.