Resource-saving in electrical supply system on city electrotransport

Authors

  • В.Ф. Далека Кафедра «Электрический транспорт» Харьковская национальная академия городского хозяйства, Ukraine
  • В.К. Нем Кафедра «Электрический транспорт» Харьковская национальная академия городского хозяйства, Ukraine
  • В.И. Скурихин Кафедра «Электрический транспорт» Харьковская национальная академия городского хозяйства, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2010.2699

Keywords:

contact wire, poorly loaded areas, pantograph, wear, «zero run», economic effec

Abstract

The questions of replacement of copper contact wire of steel aluminium are examined with the calculation of the planned economic effect from this introduction.

Author Biographies

В.Ф. Далека, Кафедра «Электрический транспорт» Харьковская национальная академия городского хозяйства

Доктор технических наук, профессор, заведующий
кафедрой

В.К. Нем, Кафедра «Электрический транспорт» Харьковская национальная академия городского хозяйства

Кандидат технических наук, доцент, преподаватель

В.И. Скурихин, Кафедра «Электрический транспорт» Харьковская национальная академия городского хозяйства

Ассистент

References

  1. Берент, В.Я. Материалы и свойства электрических контактов [Текст] / В.Я. Берент,– М.: ВНИИЖТ, 2005. – 105 с.
  2. Афанасьев, А.С. Контактные и кабельные сети трамваев и троллейбусов [Текст] / А.С. Афанасьев, Г.П. Долаберидзе, В.В. Шевченко – М.: Транспорт, 1979. – 44 с.
  3. Проблемы износостойкости контактного провода Далека В.Ф., Нем В.К., Скурихин В.И. [Текст] : сб. науч. тр. / Коммунальное хозяйство городов: Вып. 88. – К.: Техніка, 2009. – С.253 - 258.

Downloads

Published

2010-04-06

How to Cite

Далека, В., Нем, В., & Скурихин, В. (2010). Resource-saving in electrical supply system on city electrotransport. Eastern-European Journal of Enterprise Technologies, 2(7(44), 33–36. https://doi.org/10.15587/1729-4061.2010.2699

Issue

Vol. 2 No. 7(44) (2010): Energy saving technologies and equipment

Section

Energy-saving technologies and equipment

License

Copyright (c) 2014 В.Ф. Далека, В.К. Нем, В.И. Скурихин

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.