Choice of loading conditions of the power tram electric equipments

Authors

  • Денис Юрьевич Зубенко Кафедра электротранспорта Харьковская национальная академия городского хозяйства, Ukraine
  • Медеа Гураміївна Габелія Харьковская национальная академия городского хозяйства, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2010.2886

Keywords:

power electric equipment, tram, operating modes, electric traction

Abstract

On the basis of the executed researches is considered influence of service conditions on modes of a rolling stock motion. The received functional dependences have laid down in a basis of the new approach of a choice of loading conditions the power equipment of trams.

Author Biographies

Денис Юрьевич Зубенко, Кафедра электротранспорта Харьковская национальная академия городского хозяйства

Кандидат технических наук, доцент

Медеа Гураміївна Габелія, Харьковская национальная академия городского хозяйства

Магістр

References

  1. Ефремов И. С , Кобозев В. М., Юдин В. А. Теория городских пассажирских перевозок: Учеб. пособие для вузов. — М.: Высш. школа, 1980. — 535 с.
  2. Байрыева Л.С., Шевченко В.В. Электрическая тяга. Городской наземный транспорт. — М.: Транспорт, 1986. -206 с.
  3. ГОСТ 25941-83. Машины электрические вращающиеся. Методы определения потерь и коэффициента полезного действия.
  4. Розенфельд В. Е., Исаев И. П., Сидоров Н. Н., Озеров М. И. Под ред. Исаева И. П. Теория электрической тяги. - М.: Транспорт, 1995. -294 с.
  5. Яковлев Д. В., Косарев В. В., Мурзин Л. Г. Экономичный режим ведения поезда // Электрическая и тепловозная тяга, -1976. -№ 6-7. -С.8-12.

Downloads

Published

2010-05-28

How to Cite

Зубенко, Д. Ю., & Габелія, М. Г. (2010). Choice of loading conditions of the power tram electric equipments. Eastern-European Journal of Enterprise Technologies, 3(9(45), 11–13. https://doi.org/10.15587/1729-4061.2010.2886

Issue

Vol. 3 No. 9(45) (2010): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Денис Юрьевич Зубенко, Медеа Гураміївна Габелія

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.