THE AUTOMATED DESIGNING EFFECTIVE HEAT-EXCHANGE APPARATUS

Authors

  • Оксана Алексеевна Литвиненко Кафедра турбиностроения Национальный технический университет «Харьковский политехнический институт», Ukraine
  • Елена Юрьевна Пономаренко Кафедра турбиностроения Национальный технический университет «Харьковский политехнический институт», Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2010.3007

Keywords:

heat-exchange apparatus, tubular, spiral, thermal design, hydraulic

Abstract

There is presented the computer program for designing effective heat-exchange apparatus of tubular and spiral types. There is shown it approbation on an example of calculation of various types oil coolers for installation GTE-115.

Author Biographies

Оксана Алексеевна Литвиненко, Кафедра турбиностроения Национальный технический университет «Харьковский политехнический институт»

Кандидат технических наук, доцент

Елена Юрьевна Пономаренко, Кафедра турбиностроения Национальный технический университет «Харьковский политехнический институт»

Магистр

References

  1. Проектирование, монтаж и эксплуатация теплоиспользующих установок / А.М. Бакластов. – М.: Энергия, 1970. – 568 с.
  2. Теплопередача. Учебник для вузов / В.П. Исаченко. – М.: Энергия, 1975. – 488 с.
  3. Программирование на Microsoft Visual C++ 6.0 для профессионалов / Пер. с англ.: Д. Круглински, С. Уингоу, Дж. Шеферд. – СПб: Питер; М.: Издательско-торговий дом «Русская редакция», 2004. – 861 с.

Downloads

Published

2010-07-30

How to Cite

Литвиненко, О. А., & Пономаренко, Е. Ю. (2010). THE AUTOMATED DESIGNING EFFECTIVE HEAT-EXCHANGE APPARATUS. Eastern-European Journal of Enterprise Technologies, 4(7(46), 23–25. https://doi.org/10.15587/1729-4061.2010.3007

Issue

Vol. 4 No. 7(46) (2010): Energy saving technologies and equipment

Section

Energy-saving technologies and equipment

License

Copyright (c) 2014 Оксана Алексеевна Литвиненко, Елена Юрьевна Пономаренко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.