Simulation of host of distributed computer integrated manufacture

Authors

  • Анна Владимировна Тарасова Sevastopol National Technical University Universitetskaja street 33, Sevastopol, Ukraine, 99053, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.3297

Keywords:

Simulation, host, microcontroller, computer integrated manufacture

Abstract

This article discusses the use of microcontrollers as a host of distributed computer integrated manufacture. Simulation model of host is proposed for the design and analysis. The results obtained during the full-scale and software simulation are shown in the article

Author Biography

Анна Владимировна Тарасова, Sevastopol National Technical University Universitetskaja street 33, Sevastopol, Ukraine, 99053

Graduate student

Department of Cybernetics and Computer Engineering

References

  1. АСУТП.ru - Промышленные сети [Электронный ресурс]. – Электрон. текстовые данные (282 887 bytes). – Режим доступа: http://www.asutp.ru/?p=600085, Tuesday, 13 September 2011, 15:09:02.
  2. 8-bit Microcontroller with 128K Bytes of ISP Flash and CAN Controller AT90CAN128 [Электронный ресурс]. – Электрон. текстовые данные (5 742 631 bytes). – Режим доступа: http://www.atmel.com/dyn/resources/prod_documents/ doc7522.pdf Tuesday, 13 September 2011, 12:06:48.
  3. AnyLogic. Справочное руководство по Enterprise Library [Электронный ресурс]. – Электрон. текстовые данные (2 108 648 bytes). – Режим доступа: http://www.xjtek.com/support /download/documentation/ Monday, 5 September 2011, 12:53:16.

Downloads

Published

2012-02-01

How to Cite

Тарасова, А. В. (2012). Simulation of host of distributed computer integrated manufacture. Eastern-European Journal of Enterprise Technologies, 1(3(55), 34–37. https://doi.org/10.15587/1729-4061.2012.3297

Issue

Vol. 1 No. 3(55) (2012): Control systems

Section

Control systems

License

Copyright (c) 2014 Анна Владимировна Тарасова

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.