Assessment of hydrophobic sheepskin fur velour quality
DOI:
https://doi.org/10.15587/1729-4061.2015.36002Keywords:
complex quality indicator, hydrophobic sheepskin fur velourAbstract
We have determined the scope of dimensional quality indicators for sheepskin fur velour according to the desirability scale on the basis of specifications and technical documentation, expert assessments, scientific publications and research findings. On the basis of dimensionless parameters of quality, we have calculated desirability functions for individual quality indicators and a complex quality indicator for hydrophobic sheepskin fur velour produced according to a new technology. We have also compared its qualities to those of fur velour obtained by means of traditional technology.
In terms of the growing necessity to satisfy the Ukrainian consumer, we have attempted to predict the possibility of using hydrophobic sheepskin fur velour in conditions of high humidity.
It is determined that a complex quality indicator for hydrophobic fur velour is significantly higher than a complex quality indicator for fur velour produced according to a typical technology, especially after its exposure to rain.
Before the test, the hydrophobic fur velour was rated as excellent.The impact of rain on the hydrophobic fur velour has lead to a slight decrease of the complex quality indicator. It is rated as good, which is close to excellent. After exposure to rain, fur velour finished with alkene-maleic composition completely satisfies consumer needs and can be used in wet conditions, low temperatures, and dynamic loads.
It is determined that a perspective direction in making high-quality sheepskin fur velour for sheepskin products involves using a technology of its finish with alkene-maleic composition, which is aimed at better operating, hygiene, and aesthetic properties. This will specify new directions and spheres of using sheepskin fur velour, expand the assortment, raise the competitiveness of sheepskin products of Ukrainian origin, and shape the export potential, which is conditioned by the free trade zone, Agreement on association with EU, and modern world integration processes.
References
- Holodiuk, H. I. (2013). Kompleksna otsinka yakosti farbuvalnoi kompozytsii i pokryttiv na osnovi alkidnykh smol, Tovaroznavchyi visnyk, 6, 38–45.
- Azgaldov, G. G. (1982). Teoriya i praktika ocenkі kachestva tovarov, Moskow: Ekonomika, 250.
- Kostrovskaya, T. V. (2006). Razrabotka metodiki avtomatizirovannoj ocenki komfortnosti obuvi po pokazatelyam fiziko-mexanicheskix svojstv paketov materialov verxa, RGB, 160.
- Kutakh, K. M. (2014). Implementing quality management system at enterprises. Technology Audit and Production Reserves, 1/5(15), 24–26. Available at: http://journals.uran.ua/tarp/article/view/21725/19230
- Hunkalo, A. V., Shpak, O. I. (2014). Improvement of the products quality level by competent experts. Technology Audit and Production Reserves, 4/1 (18), 36–38. doi: 10.15587/2312-8372.2014.26368
- Kozar, O. P., Mokrousova, O. R. (2013). Eco-friendly technologies of leather manufacturing using natural minerals montmorilonite and zeolite. Technology Audit and Production Reserves, 6/2(14), 11–16. Available at: http://journals.uran.ua/tarp/article/view/19499/17168
- Palahniuk, Yu. V., Slitiuk, O. O. (2009). Rozrobka nomenklatury erhonomichnykh pokaznykiv yakosti odiahu. Eastern-European Journal of Enterprise Technologies, 3/6(39), 26–29. Available at: http://journals.uran.ua/eejet/article/view/20393/18021
- Khimicheva, H. I. (2013). Quality control of the leather semi-finished product at the tanning stage. Eastern-European Journal of Enterprise Technologies, 3/3(63), 34–36. Available at: http://journals.uran.ua/eejet/article/view/14679/12448
- Suprun, N. P., Osypenko, N. I., Ostrovetska, Yu. I. (2012). Analitychnyi ohliad asortymentu ta kompleksna otsinka yakosti trykotazhnykh poloten. Tovaroznavstvo ta innovatsii, 4, 116–124.
- Zhuravskyi, V. A., Kasian, E. Ye., Danylkovych, A. H. (1996). Tekhnolohiia shkiry ta khutra, DALPU, 743.
- Danylkovych, A. H., Khliebnikova, N. B., Mokrousova, O. R., Petko, K. I., Patent na KM No. 38472 Ukraina. Kompozytsiia dlia hidrofobizatsii vorsovoi shkiry, khutrianoho veliuru, shubnoi ovchyny i vyrobiv z nykh, zaiavl. 08.08.08, opubl. 12.01.09, Biul. No. 1.
- GOST 28509-90. Ovchiny` nevy`delanny`e (2006). Texnicheskie usloviya, FGUP «Standartinform», 13.
- Khliebnikova, N. B., Omelchenko, N. V., Danylkovych, A. H. (2014). Spozhyvni vlastyvosti hidrofobizovanoho khutrianoho veliuru z ovchyny v umovakh pidvyshchenoi volohosti.
- Krasnov, B. Ya., Bernshtejn, M. M., Gvozdev, Yu. M. (1979). Kompleksnaya ocenka kachestva obuvny`x materialov, Lyogkaya industriya, 80.
- Chajkovskaya, A. E., Polishhuk, L. V., Galy`k, I. S., Semak, B. D. (1989). Kompleksnaya otcenka kachestva tekstil`ny`x materyalov, Texnika, 254.
- Galy`k, I. S., Koz`mich, D. I., Semak, B. D. et. al. (1991). Optimizaciya assortimenta i kachestva tekstil`ny`x materialov, Texnika, 174.
- Axnazarova, S. L., Kafarov, V. V. (1985). Metody` optimizacii e`ksperimenta v ximicheskoj texnologii, Moskow, Vy`ssh. shk., 2, 318.
- Danylkovych, A. H., Khliebnikova, N. B., Omelchenko, N. V. (2014). Selecting the nomenclature of quality indicators of hybrophobized fur velour by expert method. Eastern-European Journal of Enterprise Technologies, 5/3 (71), 34–39. doi: 10.15587/1729-4061.2014.27613
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2015 Наталія Борисівна Хлєбнікова, Наталія Володимирівна Омельченко, Анатолій Григорович Данилкович
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.