Computer design of processes of deformation of powder materials with visualization of results of calculation

Authors

  • Сергей Григорьевич Бондаренко National Technical University of Ukraine "Kiev Polytechnic Institute" Pobeda, 37, Kiev, Ukraine, 03056, Ukraine
  • Анастасия Алексеевна Хоменко National Technical University of Ukraine "Kiev Polytechnic Institute" Pobeda, 37, Kiev, Ukraine, 03056, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.3962

Keywords:

Mathematical model, powder materials, pressing

Abstract

The processes of deformation of exposed to the compression in the closed press-form porous preform are investigated. The designing program allowing to predict descriptions of purveyance after treatment is realized

Author Biographies

Сергей Григорьевич Бондаренко, National Technical University of Ukraine "Kiev Polytechnic Institute" Pobeda, 37, Kiev, Ukraine, 03056

Ph.D., Associate Professor

Department of Cybernetics of Chemical Process

Анастасия Алексеевна Хоменко, National Technical University of Ukraine "Kiev Polytechnic Institute" Pobeda, 37, Kiev, Ukraine, 03056

Master

Department of Cybernetics of Chemical Process

References

  1. Гуревич, Ю.Г. Износостойкие композиционные материалы [Текст] / Ю.Г.Гуревич, В.Н.Анциферов, Л.М.Савиных, С.А.Оглезнева, В.Я.Буланов // –Екатеринбург: УрО РАН, 2005. – 215с.
  2. Панов, В. С. Технология и свойства спеченных твердых сплавов и изделий из них: учеб. для вузов [Текст] / В. С. Панов, А. М. Чурилин // – М.: МИСиС, 2001. – 426 с.
  3. Шатерина, М. А. Технология конструкционных материалов [Текст] / М. А. Шатерина // – М.: Политехника, 2005. – 597 с.
  4. Буланов, В.Я. Диагностика свойств композитов [Текст] / В.Я. Буланов, П.П. Савинцев // –Свердловск: УрО АН СССР, 1989. – 254 с.
  5. Дурнев, В. Д. Экспертиза и управление качеством промышленных материалов [Текст] / В. Д. Дурнев, С. В. Сапунов, В. К. Федюкин // – СПб.: Питер, 2004. – 253 с.
  6. Кипарисов, С.С. Порошковая металлургия [Текст] / С.С. Кипарисов, Г.А. Либенсон // – М.: Металлургия, 1971. – 528 с.
  7. Ермаков С.С. Порошковые стали и изделия [Текст] / С.С. Ермаков, Н.Ф. Вязников // – Л.: Машиностроение, 1990. – 319 с.
  8. Евстратов, В.А. Теория обработки металлов давлением [Текст] / В.А. Евстратов // – Харьков: Вища школа, 1981. – 248 с.
  9. Рыбин, Ю. И. Теория уплотнения порошковых материалов : теория и математическое моделирование процессов обработки давлением уплотняемых материалов : учеб. пособие [Текст] / Ю. И. Рыбин // –СПб.: Изд-во СПбГПУ, 2002. – 109 с.
  10. Друянов, Б.А. Математическое моделирование процессов обработки давлением металлических порошков и пористых тел [Текст] / Б.А. Друянов, И.Д. Радомысельский, М.Б. Штерн // Порошковая металлургия. –1981. – № 3. –С. 6–11.
  11. Баглюк, Г.А. Научно-технологические принципы получения изделий из порошковых материалов на основе гетерогенных железо-углеродистых сплавов с повышенной износостойкостью [Текст] / Г.А. Баглюк // – НАН Украины; Институт проблем материаловедения им. И.Н.Францевича. – К.: 2004. – 486 с.

Downloads

Published

2012-04-01

How to Cite

Бондаренко, С. Г., & Хоменко, А. А. (2012). Computer design of processes of deformation of powder materials with visualization of results of calculation. Eastern-European Journal of Enterprise Technologies, 2(14(56), 61–65. https://doi.org/10.15587/1729-4061.2012.3962

Issue

Vol. 2 No. 14(56) (2012): Computer modeling in chemistry, technology and systems for sustainable development

Section

Computer modeling in chemistry, technology and systems for sustainable development

License

Copyright (c) 2014 Сергей Григорьевич Бондаренко, Анастасия Алексеевна Хоменко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.