Cut of cars rolling down speed control quality improvement on automated marshalling humps

Authors

  • Олександр Миколайович Огар Ukrainian State Academy of Railway Transport Feuerbach square, 7, Kharkov, Ukraine, 61050, Ukraine
  • Ольга Сергіївна Губачова Ukrainian State Academy of Railway Transport Feuerbach square, 7, Kharkov, Ukraine, 61050, Ukraine
  • Лариса Анатоліївна Страна Ukrainian State Academy of Railway Transport Feuerbach square, 7, Kharkov, Ukraine, 61050, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.3992

Keywords:

Marshalling humpbrake position, intellectual system, automation

Abstract

Аutomated marshalling humps operation experience has been analyzed. The necessity of forming control actions with meteorological conditions parameters predictive values has been proved. These parameters values forecasting method has been substantiated

Author Biographies

Олександр Миколайович Огар, Ukrainian State Academy of Railway Transport Feuerbach square, 7, Kharkov, Ukraine, 61050

Doctor of Technical Sciences, docent

Department of railway stations and junctions designing

Ольга Сергіївна Губачова, Ukrainian State Academy of Railway Transport Feuerbach square, 7, Kharkov, Ukraine, 61050

Master

Department of Management of operational work

Лариса Анатоліївна Страна, Ukrainian State Academy of Railway Transport Feuerbach square, 7, Kharkov, Ukraine, 61050

Engineer

Department of Management of freight and commercial work

References

  1. Шабельников, А. Н. Системы автоматизированных сортировочных горок на базе промышленных компьютеров [Текст] / А. Н. Шабельников // Автоматика, связь, информатика. – 2001. – № 11. – С. 13–16.
  2. Шабельников, А. Н. Разработка теории и методов автоматизации управления сложными процессами на сортировочной станции [Текст] : дисс. ... д-ра техн. наук: 05.13.06 / А. Н. Шабельников. – Москва, 2005. – 344 с.
  3. Ковалев, С. М. Нечетко-темпоральные модели структурного анализа и идентификации динамических процессов в слабо формализованных задачах принятия решений [Текст] : дисс. ... д-ра техн. наук : 05.13.01, 05.13.17 / С. М. Ковалев. – Таганрог, 2002. – 337 с.
  4. Огар, О.М. Розвиток теорії експлуатації та методів розрахунку конструктивно-технологічних параметрів сортувальних гірок [Текст] : дис. … д-ра техн. наук: 05.22.20 / О.М. Огар. – Харків, 2011. – 368 с.
  5. Панчев, С. Случайные функции и турбулентность [Текст] / С. Панчев. – Л.: Гидрометеоиздат, 1967. – 427 с.
  6. Осовский, С. Нейронные сети для обработки информации [Текст] / С. Осовский // Пер. с польского И. Д. Рудинского. – М.: Финансы и статистика, 2002. – 344 с.

Downloads

Published

2012-06-01

How to Cite

Огар, О. М., Губачова, О. С., & Страна, Л. А. (2012). Cut of cars rolling down speed control quality improvement on automated marshalling humps. Eastern-European Journal of Enterprise Technologies, 3(3(57), 11–13. https://doi.org/10.15587/1729-4061.2012.3992

Issue

Vol. 3 No. 3(57) (2012): Control systems

Section

Control systems

License

Copyright (c) 2014 Олександр Миколайович Огар, Ольга Сергіївна Губачова, Лариса Анатоліївна Страна

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.