RESEARCH OF THE PROCESSES INTERACTION OF THE RUNNING SYSTEMS AUTOMOBILES WITH THE BEARING SURFACE DEFORMED
DOI:
https://doi.org/10.15587/1729-4061.2012.4529Keywords:
vehicle, wheel, mathematical modeling, bearing surface, dynamic load.Abstract
The article is dedicated to the practical problem of detection of dynamic effect of vehicles running systems on the ground. It presents the designed dynamic model of interaction of two-axle vehicle with the deformed bearing surface – ground. There is a diagram that allows taking into account exploitation performances of the vehicle, load in its elements as well as in contact of wheels with the ground. The model of deformed bearing surface was adopted in combined condition and was presented as a set of connected flexible elements. The mathematical model of interaction of two-axle vehicle with deformed bearing surface was drawn up. It makes it possible to research the processes of effect of vehicle exploitation performances on the value of ground deformation, taking into account its physical-mechanical properties. The designed mathematical model provides the quality research of processes that occur in contact spot of wheel and tire. The results of mathematical modeling can be applied during vehicle designing and wheels selecting of various dimension types.References
- Золотаревская, Д.И. Изменение сопротивления качению, реологических свойств и плотности почвы под воздействием колес [Текст] / Д.И. Золотаревская // Тракторы и сельхозмашины. – 2004. – № 2. – С. 22-25.
- Золотаревская, Д.И. Расчет показателей взаимодействия движителей с почвой [Текст] / Д.И. Золотаревская // Тракторы и сельхозмашины. – 2001. – № 3. –С. 18-22.
- Беккер, М.Г. Введение в теорию систем местность – машина [Текст] / М.Г. Беккер – М.: Машиностроение, 1973. – 520 с.
- Скотников, В.А. Моделирование уплотнения почвы движителями кормоуборочных комбайнов [Текст] / В.А. Скотников, Н.Д. Янцов // Механизация и электрификация сельского хозяйства. – 1985. – № 9 – С. 5-7.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Владимир Николаевич Болдовский
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
