Development of recommendations for selection of equipment bending pipe

Authors

  • Анатолій Іванович Долматов National Aerospace University. NE Zhukovsky, "HAI" Street. Chkalov, 17, Kharkov 61070, Ukraine., Ukraine
  • Ігор Олександрович Жданов JSC «FED» 132, Sumskaya Street, Kharkov, 61023 Ukraine, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.5623

Keywords:

Tube bending, decrease of width of a walls and a swelling of walls, wrinkling

Abstract

This paper presents the results of the analysis of different methods and recommendations on the selection of universal and specialized equipment for bending pipes, ranging from the simplest of machines for hand bending and finishing CNC machines

Author Biographies

Анатолій Іванович Долматов, National Aerospace University. NE Zhukovsky, "HAI" Street. Chkalov, 17, Kharkov 61070, Ukraine.

Dr. Sc. Sciences, prof., head of production technology of aircraft engines of the

Ігор Олександрович Жданов, JSC «FED» 132, Sumskaya Street, Kharkov, 61023 Ukraine

Deputy Director

References

  1. . Dyau, J.Y. On the Response of Elastic-Plastic Tubes Under Combined Bending and Tension [Text]/ J.Y. Dyau, S. Kyriakides //Journal of Offshore Mechanics and Arctic Engineering.- 1992.- Vol.114. - pp.50-62.
  2. Miller J.E. On Bend-Stretch Forming of Aluminum Extruded Tubes - I: Experiments [Text]/ J.E. Miller, S.Kyriakides, A.H. Bastard// International Journal of Mechanical Sciences.- 2001.- Vol. 43(5).- pp. 1283-1317.
  3. Miller J.E. On Bend-Stretch Forming of Aluminum Extruded Tubes - II: Analysis [Text]/J.E. Miller, S.Kyriakides, A.H. Bastard// International Journal of Mechanical Sciences.- 2001.- Vol. 43(5).- pp. 1319-1338.

Published

2012-08-20

How to Cite

Долматов, А. І., & Жданов, І. О. (2012). Development of recommendations for selection of equipment bending pipe. Eastern-European Journal of Enterprise Technologies, 4(7(58), 35–37. https://doi.org/10.15587/1729-4061.2012.5623

Issue

Section

Applied mechanics