Calculating the cost of energy at work uniflow cyclone using the software package Flow Simulation

Authors

  • Володимир Володимирович Майструк National University "Lviv Polytechnic" Str. Professorial, 1A, Lviv, 79013, Ukraine
  • Роман Іванович Гаврилів National University "Lviv Polytechnic" Square of St. Yura, 9, Lviv, 79013, Ukraine
  • Андрій Сергійович Попіль Lviv Polytechnic National University Square of St. Yura, 9, Lviv, 79013, Ukraine
  • Андрій Миколайович Басістий Lviv Polytechnic National University Square of St. Yura, 9, Lviv, 79013, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.5765

Keywords:

hydraulic resistance cyclone, uniflow cyclone, software package Flow Simulation, theoretical analysis of the energy cost of the cyclone

Abstract

In this paper the possibility of using the software package Flow Simulation to estimate hydraulic resistance uniflow cyclone. The main objective of the research is in theoretical analysis of motion of the gas flow in the working zone system and the impact of structural parameters on energy costs for its work. We solve this problem by using a computer program Solid Works software package Flow Simulation.

The presented method of calculating the hydraulic resistance will significantly save time on designing cyclones equipment and pre discard unsuccessful designs initially.

Based on the theoretically determined by Flow Simulation hydraulic resistance calculated coefficient of hydraulic resistance system and a preliminary assessment of energy costs for the cleaning process. Comparative analysis of the energy cost of the cleaning process shows high effectiveness of the proposed design of the cyclone.

The results can be used in engineering practice in the design of new and modernization of existing equipment pyloochysnoho pryamotechiynoyu zone separation

Author Biographies

Володимир Володимирович Майструк, National University "Lviv Polytechnic" Str. Professorial, 1A, Lviv, 79013

Candidate tehnichnik, Associate Professor

Department of Electronic Engineering

Institute of Engineering Mechanics and Transport

Роман Іванович Гаврилів, National University "Lviv Polytechnic" Square of St. Yura, 9, Lviv, 79013

Candidate tehnichnik, Associate Professor

Department of Chemical Engineering

Institute of Chemistry and Chemical Technology

Андрій Сергійович Попіль, Lviv Polytechnic National University Square of St. Yura, 9, Lviv, 79013

Student gr. Processes and equipment of chemical plants

Department of Chemical Engineering

Institute of Chemistry and Chemical Technology

Андрій Миколайович Басістий, Lviv Polytechnic National University Square of St. Yura, 9, Lviv, 79013

Student gr. Processes and equipment of chemical plants

Department of Chemical Engineering

Institute of Chemistry and Chemical Technology

References

  1. Дубинін, А.І. Вплив бункера на ефективність роботи напівпромислового прямотечійного циклону з коаксіальною вставкою. [ Текст] / А.І. Дубинін, В.В. Майструк, Р.І. Гаврилів // Восточно-Европейский журнал передовых технологий. Харків - 2011 вип. 1/9(49). С. 20-22.
  2. Дубинін, А.І. Прямотечійний циклон з коаксіальною вставкою. Аналіз роботи. [ Текст] / А.І. Дубинін, Я.М. Ханик, В.В. Майструк, Р.І. Гаврилів // Хімічна промисловість України, 2005, №3. – С.26-28.

Downloads

Published

2012-12-18

How to Cite

Майструк, В. В., Гаврилів, Р. І., Попіль, А. С., & Басістий, А. М. (2012). Calculating the cost of energy at work uniflow cyclone using the software package Flow Simulation. Eastern-European Journal of Enterprise Technologies, 6(8(60), 28–31. https://doi.org/10.15587/1729-4061.2012.5765

Issue

Vol. 6 No. 8(60) (2012): Energy-saving technologies and equipment

Section

Energy-saving technologies and equipment

License

Copyright (c) 2014 Володимир Володимирович Майструк, Роман Іванович Гаврилів, Андрій Сергійович Попіль, Андрій Миколайович Басістий

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.