Контроль динаміки руху подовженого контейнера

Authors

  • Михаил Александрович Калмыков Восточноукраинский национальный университет им. Владимира Даля 91034, г. Луганск, кв. Молодежный, 20А, Ukraine
  • Алексей Владимирович Романченко Восточноукраинский национальный университет им. Владимира Даля 91034, г. Луганск, кв. Молодежный, 20А, Ukraine
  • Валерий Владимирович Яковенко Восточноукраинский национальный университет им. Владимира Даля 91034, г. Луганск, кв. Молодежный, 20А, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2010.5825

Keywords:

Container, control, sensors, output signal, magnet, keyer

Abstract

The method of control of motion dynamics of the extended container with two or by a few synchronously workings vibroexciters is offered, allowing to measure the vertical and horizontal moving of container, amplitude, frequency and acceleration of motion of container

Author Biographies

Михаил Александрович Калмыков, Восточноукраинский национальный университет им. Владимира Даля 91034, г. Луганск, кв. Молодежный, 20А

Кандидат технических наук, доцент кафедры «Компьютерные системы и сети»

Алексей Владимирович Романченко, Восточноукраинский национальный университет им. Владимира Даля 91034, г. Луганск, кв. Молодежный, 20А

Аспирант кафедры «Технология машиностроения»

Валерий Владимирович Яковенко, Восточноукраинский национальный университет им. Владимира Даля 91034, г. Луганск, кв. Молодежный, 20А

Доктор технических наук, профессор, заведующий кафедры «Электромеханика»

References

  1. Букреев В.В., Яковенко В.В. Оптимальное проектирование железоотделителей на постоянных магнитах / В.В. Букреев, В.В. Яковенко // Технічна електродинаміка. Проблеми сучасної електротехніки. . – 2010. – Ч.2. – С. 13-15.

Downloads

Published

2010-12-01

How to Cite

Калмыков, М. А., Романченко, А. В., & Яковенко, В. В. (2010). Контроль динаміки руху подовженого контейнера. Eastern-European Journal of Enterprise Technologies, 6(9(48), 62–67. https://doi.org/10.15587/1729-4061.2010.5825

Issue

Vol. 6 No. 9(48) (2010): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Михаил Александрович Калмыков, Алексей Владимирович Романченко, Валерий Владимирович Яковенко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.