Theoretical analysis of the cost of processing machine parts

Authors

  • Валерій Олексійович Жовтобрюх Ltd. "Technical Center" VariUs " Descent Kalinina, 10, Dnepropetrovsk, 49038, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.5858

Keywords:

Cost of treatment, mode of cutting, tool

Abstract

Choice of the optimal parameters of mechanical treatment of machine parts by the lowest cost of treatment is done. Concrete and practical recommendations for improving the technical and economic parameters of treatment are given

Author Biography

Валерій Олексійович Жовтобрюх, Ltd. "Technical Center" VariUs " Descent Kalinina, 10, Dnepropetrovsk, 49038

Director

References

  1. Бобров, В. Ф. Основы теории резания металлов [Текст] / В. Ф. Бобров. – М.: Машиностроение, 1975. – 343 с.
  2. Теоретические основы резания и шлифования материалов [Текст]: учеб, пособие / А. В. Якимов, Ф. В. Новиков, Г. В. Новиков и др. – Одесса: ОГПУ, 1999. – 450 с.
  3. Новиков, Ф.В. Разработка эффективных технологий механической обработки деталей машин [Текст] / Ф. В. Новиков, В. А. Жовтобрюх // Автомобильный транспорт. – Х.: ХНАДУ. – 2011. – Вып. 29. – С. 212–215.

Downloads

Published

2012-04-01

How to Cite

Жовтобрюх, В. О. (2012). Theoretical analysis of the cost of processing machine parts. Eastern-European Journal of Enterprise Technologies, 2(1(56), 18–21. https://doi.org/10.15587/1729-4061.2012.5858

Issue

Vol. 2 No. 1(56) (2012): Mechanical engineering technology

Section

Mechanical engineering technology

License

Copyright (c) 2014 Валерій Олексійович Жовтобрюх

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.