The improvement of dampening solution for offset printing
DOI:
https://doi.org/10.15587/1729-4061.2016.74981Keywords:
printing products, offset printing, dampening fluid, antibacterial additives, conductivity, acidityAbstract
Experimental models of dampening fluids with antibacterial additives are developed. The influence of additives on the change in conductivity and acidity of dampening fluids and stability characteristics during operation and storage are studied. Methods of processing dampening fluids to improve their performance level and quality of the final printed product are studied. The work reveals some new facts about the characteristics for printability such as influences of dampening solution’s additives on the color characteristics of imprints. The material is devoted to the study of complex technological environment interference parameters printed contact and method of stabilization for the normalization of quality reproduction images of porous and nonadsorbent materials. There were grounded technological parameters of stable color reproduction by minimizing the ratio of ink transferring on nonadsorbent and porous materials.
There were developed for a special purpose additions to regulate the offset printing process and method of their introduction into the technology environment and its control that allows to improve the quality of printed production. The effect of technological environment components on stability of printing process has been determined.References
- Kuznetsov, Y. V. (2016). Basics illustrative printing technology. Sankt-Peterburg: Russian literature, 440.
- Zorenko, Y.; Velichko, O. M. (Ed.) (2015). Improving the technology of reproduction offset printing. Kiev: PPC Kiev University, 176.
- Melnikov, O. V. (2007). Flat offset printing technology. Lviv: Ukrainian Academy of Printing, 388.
- Khohlova, R. A., Velychko, O. M. (2014). Finishing printed products of varnishing. Kiev: PPC Kiev University, 183.
- Gavrysh, A., Zorenko, O. (2007). Technical analysis of the system “printing form – offset rubber fabric canvas – imprint”. Technology and Technique of Typography, 3-4 (17-18), 36–40.
- Skyba, V. M. (2015). Printing stability of offset printing plates. Technology and Technique of Typography, 1 (47), 30–39. Available at: http://ttdruk.vpi.kpi.ua/article/view/43272/39745
- Orlova, E. Y., Vulkanov, E. V. (2014). Study feed dampening solutions with low content of isopropyl alcohol feeding group dampening unit. Journal of the Moscow State University of Printing, 1, 144–147. Abailable at: http://cyberleninka.ru/article/n/issledovanie-podachi-uvlazhnyayuschih-rastvorov-s-malym-soderzhaniem-izopropilovogo-spirta-pitayuschey-gruppoy-uvlazhnyayuschego
- Blagodir, O., Zolotukhina, К., Kushlyk, B., Velychko, O. (2016). Regularities of ink-water balance stability in offset printing. EUREKA: Physics and Engineering, 3, 31–37. doi: 10.21303/2461-4262.2016.00078
- Uhlev, A., Hertsenshteyn, I., Orlova, E. (2015). Methods of measurement fountain solution on the roller film dampening systems. Journal of the Moscow State University of Printing, 1, 165–167. Available at: http://cyberleninka.ru/article/n/sposob-izmereniya-uvlazhnyayuschego-rastvora-na-valikah-plenochnogo-uvlazhnyayuschego-apparata
- Nechiporenko, N. A., Berdovschikova, А. V., Bozojan, M. A. (2013). The choice of the concentrate and to determine the optimal formulation of fountain solution for sheetfed offset printing. Proceedings of the higher educational institutions. Problems of printing and publishing, 6, 30–42.
- Bozojan, M. A., Nechiporenko, N. A. (2015). Influence of dampening conditions on the color characteristics of imprints in sheet-fed offset printing. Proceedings of the higher educational institutions. Problems of printing and publishing, 3, 14‑22. Available at: http://mgup.ru/article/1840
- Mikalainis, P., Sidaravičius, J., Turla, V. (2010). The Influence of Formulating a Damping Solution on Dot Gain. Mokslas – Lietuvos Ateitis. Science – Future of Lithuania, 2 (4), 18–23. doi: 10.3846/mla.2010.061
- Rossitza, S. (2015). Offset Printing without Isopropyl Alcohol in Damping Solution. Energy Procedia, 74, 690–698. doi: 10.1016/j.egypro.2015.07.804
- Gorova, A. (2011). Modern system of automatic control and regulation parameters wetting solution. Kvalilogiya of the book, 2, 79–83. Available at: http://nbuv.gov.ua/UJRN/Kk_2011_2_11
- Technotrans Group. Available at: http://www.technotrans.com/en/industries/printing-industry/sheet-fed-offset/dampening-solution-circulators-inking-unit-temperature-control/betac.html
- Technotrans. MacHOUSE. Available at: http://machouse.ua/brands/TECHNOTRANS.html
- Kopailenko, І. V. (2012). The impact of water quality on the property of dampening solution offset printing. Technology and Technique of Typography, 4 (38), 116–122. Available at: http://ttdruk.vpi.kpi.ua/article/view/32217/28875
- Estrina, М. V., Kanagin, V. О. (2010). Influence of treatment the magnetic field on properties of wetting solution. Technology and Technique of Typography, 4 (30), 182–186. Available at: http://ttdruk.vpi.kpi.ua/article/view/55768
- Li, L. F., Wang, W. M., Liao, C. X., Zhou, Y. Y., Gong, J. H. (2015). Studies on Treatment of Waste Fountain Solution from Sheet-Fed Offset Printing. Applied Mechanics and Materials, 731, 321–324. doi: 10.4028/www.scientific.net/amm.731.321
- Fuping, L., Ian, P., Wei, S. (2008). Ink-fountain Solution Emulsion in Offset Printing Studied Using Confocal Microscopy. Appita Journal: Journal of the Technical Association of the Australian and New Zealand Pulp and Paper Industry, 61 (6), 461–467. Available at: http://www.worldcat.org/title/ink-fountain-solution-emulsion-in-offset-printing-studied-using-confocal-microscopy/oclc/4822614745&referer=brief_results
- Velychko, O., Zagorodni, R., Zolotukhina, K. et. al. (2016). Patent of Ukraine No 108080. IPC (2016.01) B41N 3/08 (2006.01), B41N 3/00. Wetting solution for flat offset printing. No u201601782, declared: 25.02.2016; published: 24.06.2016, № 12.
- Velychko, O., Zorenko, Y., Savchenko, K. et. al. (2011). Patent of Ukraine No 60660. IPC(2011.01) C09D 11/10 92006.01), B41M 1/00, B41M 3/00. Ink for offset printing. No u201014392, declared: 01.12.2010; published: 25.06.2011, № 12.
- Batrak, A. (2007). Planning and Organization experiment. Krasnojarsk: PPC SFU, 60.
- ISO 12647-2:2008. Graphic technology – Process control for the production of half-tone colour separations, proof and production prints – Part 2: Offset lithographic processes (2010). Kyiv: Derzhspozhyvstandart Ukrainy.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2016 Olena Velychko, Каteryna Zolotukhina, Tatiana Rozum
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.