Development of the system of automatic control of steam boilers at electric power plants during combustion of low quality fuel
DOI:
https://doi.org/10.15587/1729-4061.2016.85366Keywords:
steam boiler, thermal power plant, energy saving, energy losses, activator of combustionAbstract
A general principle of energy saving control of a steam boiler at thermal power stations is presented, which implies the formation and subsequent minimization of function of energy losses. This provides the possibility to ensure minimum losses of energy (maximum efficiency) under all basic modes of normal work of equipment. Parameters of the combustion activator are included in functional dependences and initial models of a boiler unit as the object of control, which makes it possible to form reference models of a steam boiler, necessary for solving the problem of energy saving control during the combustion of low quality fuels.
A method for increasing the accuracy of measurement and the control of feeding solid fuel to the furnace of a boiler at thermal power stations is proposed. This makes it possible to regulate fuel consumption more accurately and to have more precise information for determining technical and economic indices of work of the power unit. A new system of automated control of feeding additives, which activate the process of combustion, was proposed. The system of automated control of additives makes it possible to accurately regulate consumption of additives depending on the quality and amount of fuel supplied to the furnace. This provides for the possibility to maximally use the potential of activators of combustion for different grades of solid fuel. The proposed system may be used at thermal power plants that operate on the low quality fuel. The implementation of the proposed solutions will make it possible to increase efficiency of the power units of coal-dust TPP at the combustion of low quality fuels by the magnitude of up to 4 %, as well as to completely eliminate the addition of natural gas.
References
- Duel, M. A., Shelepov, I. G. (2007). Avtomatizaciya teploenergeticheskih ustanovok teplovih i atomnih elektrostanciy. Kharkov, 312.
- Saccomanno, F. (2003). Electric power systems: Analysis and control. IEEE Press Series on Power Ingineering. doi: 10.1002/0471722901
- Goncalves, C. V., Vilarinho, L. O., Scotti, A., Guimaraes, G. (2006). Estimation of heat source and thermal efficiency in GTAW process by using inverse techniques. Journal of Materials Processing Technology, 172 (1), 42–51. doi: 10.1016/j.jmatprotec.2005.08.010
- Johnson, M. A., Moradi, M. H. (Eds.) (2005). PID control. London: Springer. doi: 10.1007/1-84628-148-2
- Glattfelder, A. H., Schaufelberger, W. (2003). Control systems with input and output constraints. London: Springer. doi: 10.1007/978-1-4471-0047-8
- Abou khachfe, R., Jarny, Y. (2001). Determination of heat sources and heat transfer coefficient for two-dimensional heat flow – numerical and experimental study. International Journal of Heat and Mass Transfer, 44 (7), 1309–1322. doi: 10.1016/s0017-9310(00)00186-1
- Zvit NDR za temoyu gospdogovoru z TOV NVP “Adioz” (m. Kiev) № 11–10: Obrobka ta analiz rezultativ teplovih balansobih viprobuvan kotla TP-100 energobloku 200 MVt Zmiivskoi TES (2012). Kharkiv: UIPA.
- Artyuh, S. F., Duel, M. A., Shelepov, I. G. (2001). Avtomatizirovannie sistemi upravleniya tehnologicheskimi processami v energetike. Kharkov: Znanie, 416.
- Kang, C. A., Brandt, A. R., Durlofsky, L. J. (2016). A new carbon capture proxy model for optimizing the design and time-varying operation of a coal-natural gas power station. International Journal of Greenhouse Gas Control, 48, 234–252. doi: 10.1016/j.ijggc.2015.11.023
- Kanyuk, G. I., Mezerya, A. Y., Suk, I. V. (2016). Metodi i modeli energosberegayusego upravleniya energeticheskimi ustanovkami elektrostanciy. Kharkov: Tochka, 328.
- Kanyuk, G. I., Mezerya, A. Y., Laptinova, K. V. (2013). Pat. № 84389 UA. Prystrij vymiru vytraty tverdoho palyva teplovyx elektrostancij. MPK F22B 35/00. No. u 201302082; declareted: 19.02.2013; published: 25.10.2013, Byul. № 20.
- Kanyuk, G. I., Mezerya, A. Y., Laptinova, K. V. (2013). Pat. № 82811 UA. Prystrij avtomatyzovanoho dozuvannja podaci prysadok v topku kotla teplovyx elektrostancij. MPK F22B 35/00. No. u 201302031; declareted: 19.02.2013; published: 12.08.2013, Byul. № 15.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2016 Gennadiy Kanyuk, Andrey Mezerya, Irina Suk, Igor Babenko, Elena Bliznichenko
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.