Gas turbine working grid profiles design via inverse problem

Authors

  • Валерий Петрович Субботович National Technical University «Kharkiv Polytechnic Institute», Frunze str. 21, Kharkiv, 61002, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2013.9419

Keywords:

gas turbine, working grid, profile, interblade channel, direct and inverse problems.

Abstract

Application of existing methods of solution of direct and inverse problems for the 3D-flow at optimal design of turbomachinery grids is associated with big problems, and the method of solution of the inverse problem even for the Q3D-flow, which takes into account the characteristics of the organization of the process of optimization search, opens up new possibilities for the design. The causes for the development of a new method were also positive results of experimental studies of the grid of the nozzle profiles with wavy shapes of trough and back, designed via the inverse problem for the 2D-current, which were conducted by the author.
The direct and inverse problems for the Q3D-flow were divided into separate subtasks that could have been solved in any order or simultaneously. This provided the possibility to control any part of the designed blade in terms of strength and technological effectiveness, which could significantly reduce design time. The individual subtasks were solved by the methods of nonlinear programming that did not require storage of significant amounts of information.
The parameters of the flow in the interblade channels for the fixed and rotating working grid of a gas turbine were determined, using the direct problem. Applying the inverse problem the interblade channels of grids were designed and the effect of rotation of the form of the surface of current and the aerodynamic boundary conditions on the coefficient of the profile losses of the grid and the geometric characteristics of profiles was shown.

Author Biography

Валерий Петрович Субботович, National Technical University «Kharkiv Polytechnic Institute», Frunze str. 21, Kharkiv, 61002

Ph.D., Senior Research Fellow

Turbine Department

References

  1. Van den Braembussche R.A. Turbomachinery component design by means of CFD [Text]// Task Quarterly Journal. – 2002. – Vol.6, No 1. – Р.39–61.
  2. Бойко А.В. Применение вычислительной аэродинамики к оптимизации лопаток турбомашин [Текст] /А.В. Бойко, Ю.Н. Говорущенко, М.В. Бурлака – Харків: НТУ “ХПІ”, – 2012. - 210 с.
  3. Horlock J.H., Denton J.D. A Review of some design practice using CFD and a current perspective. GT2003-38973. ASME TURBO EXPO 2003
  4. Субботович, В.П. Задача расчета скорости на поверхности лопатки турбомашины как задача оптимизации [Текст] / В.П. Субботович, А.Ю. Юдин // Вестник Национального технического университета “ХПИ”.– Харьков: НТУ “ХПИ”. – 2004. – № 12. – С.101–106.
  5. Субботович В.П. Постановка и метод решения обратной задачи для определения формы межлопаточных каналов кольцевых решеток турбомашин [Текст] / В.П. Субботович, А.Ю. Юдин // Вестник Национального технического университета “ХПИ”.– Харьков: НТУ “ХПИ”. – 2005. – № 29. – С.49–56.
  6. Субботович, В.П. Обтекание трехмерным потоком решетки профилей турбомашины на поверхности вращения [Текст] / В.П. Субботович, А.Ю. Юдин, Ф.К. Там // Вестник Национального технического университета “ХПИ”.– Харьков: НТУ “ХПИ”. – 2008. – № 6. – С.41–46.
  7. Субботович, В.П. Обратная задача теории решеток на осесимметричной поверхности тока [Текст] / В.П. Субботович, А.Ю. Юдин, Ф.К. Там // Вестник Национального технического университета “ХПИ”.– Харьков: НТУ “ХПИ”. – 2009. – № 3. – С.56–61.

Downloads

Published

2013-02-05

How to Cite

Субботович, В. П. (2013). Gas turbine working grid profiles design via inverse problem. Eastern-European Journal of Enterprise Technologies, 1(8(61), 25–29. https://doi.org/10.15587/1729-4061.2013.9419

Issue

Vol. 1 No. 8(61) (2013): Energy saving technologies and equipment

Section

Energy-saving technologies and equipment

License

Copyright (c) 2014 Валерий Петрович Субботович

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.