Thermodynamic analysis of air-compression refrigerating machine based on the exergy cost theory

Authors

DOI:

https://doi.org/10.15587/1729-4061.2017.112113

Keywords:

thermo-economic model, exergy cost, thermodynamic analysis, air-compression refrigerating machines, heat pump systems

Abstract

On the basis of the exergy cost theory, a procedure has been developed for carrying out an in-depth thermodynamic analysis of air-compression refrigerating machines and thermal pumps taking into consideration nonequivalence of exergy losses in various links of thermotransformation process and their effect on consumption of exergy supplied to the system. A thermoeconomic model of a single-stage air-compression refrigerating machine was proposed which takes into consideration structural and topological features of the process scheme and interrelation between its elements. For an equivalent mapping of structural and topological features of the refrigerating machine scheme, a parametric flow graph was developed. The procedure uses a matrix form of recording exergy balances which is the most convenient for representation of the thermoeconomic models. In order to obtain reference operating mode of the refrigerating machine, the principle of thermodynamic process idealizing was used. Application of the structural theory of thermoeconomics has made it possible to establish the portion of endogenous and exogenous destruction of exergy in the elements of the refrigerating machine.

Numerical implementation of the proposed procedure has made it possible to reveal influence of internal irreversibility in the cycle determined by non-isentropic compression processes in the compressor and expansion in the expander. A significant effect of efficiency of the expansion process in the expander on the exergy efficiency of the air-compression refrigerating machine was established.

Influence of the change of ambient temperature on the character of consumption of exergy by each element of the refrigeration machine was estimated. It has been revealed that even a slight change of the ambient temperature significantly affects consumption of “fuel” by each element of the system, while the dependence is linear.

Generalized dependences of exergy indicators on variable factors have been obtained which enabled finding of unfavorable operating conditions for equipment with increased energy consumption. It was established that the efficiency factor of the turboexpander has the greatest influence on the change of consumption of exergy of “fuel” in the system.

Author Biographies

Dionis Kharlampidi, A. N. Podgorny Institute For Mechanical Engineering Problems Pozharsky str., 2/10, Ukraine, Kharkiv, 61046

Doctor of Technical Sciences, Senior Researcher, Leading Researcher

Department for modeling and identification of thermal processes

Victoria Tarasova, A. N. Podgorny Institute For Mechanical Engineering Problems Pozharsky str., 2/10, Ukraine, Kharkiv, 61046

PhD, Senior Researcher

Department for modeling and identification of thermal processes

Mikhail Kuznetsov, A. N. Podgorny Institute For Mechanical Engineering Problems Pozharsky str., 2/10, Ukraine, Kharkiv, 61046

PhD, Researcher

Department for modeling and identification of thermal processes

Evgeniy Voytenko, A. N. Podgorny Institute For Mechanical Engineering Problems Pozharsky str., 2/10, Ukraine, Kharkiv, 61046

Postgraduate student

Department for modeling and identification of thermal processes

References

  1. Fialko, N. M., Zimin, L. B. (2006). Ocenka effektivnosti primeneniya teplovyh nasosov v usloviyah metropolitenov i ugol'nyh shaht. Promyshlennaya teplotekhnika, 28 (2), 111–119.
  2. Kharlampidi, D. Kh., Tarasova, V. A. (2012). K voprosu primeneniya vozdushnogo teplonasosnogo cikla Braytona dlya sistem teplohladosnabzheniya stanciy metropolitenov. Energosberezhenie. Energetika. Energoaudit, 4, 40–48.
  3. Kharlampidi, D. Kh., Tarasova, V. A. (2015). Primenenie vozdushnogo teplonasosnogo cikla Braytona dlya sistem teplohladosnabzheniya. Trudy XV mezhdunar. nauch.-tekhn. konf. «Sovershenstvovanie turboustanovok metodami matematicheskogo i fizicheskogo modelirovaniya». Kharkiv: IPMash NANU.
  4. Kharlampidi, D. Kh. (2015). Metodika termodinamicheskoy optimizacii vozdushnogo teplonasosnogo cikla Braytona. Vestnik KGTU im. A. N. Tupoleva, 4, 98–106.
  5. Kharlampidi, D., Tarasova, V., Kuznetsov, M., Omelichkin, S. (2016). Application of graphic apparatus of c-curves for the analysis and optimization of supercritical cycles of thermotransformers. Eastern-European Journal of Enterprise Technologies, 5 (8 (83)), 20–25. doi: 10.15587/1729-4061.2016.79988
  6. Kuznetsov, M., Kharlampidi, D., Tarasova, V., Voytenko, E. (2016). Thermoeconomic optimization of supercritical refrigeration system with the refrigerant R744 (CO2). Eastern-European Journal of Enterprise Technologies, 6 (8 (84)), 24–32. doi: 10.15587/1729-4061.2016.85397
  7. Morosuk, T., Tsatsaronis, G. (2009). Advanced exergetic evaluation of refrigeration machines using different working fluids. Energy, 34 (12), 2248–2258. doi: 10.1016/j.energy.2009.01.006
  8. Kelly, S., Tsatsaronis, G., Morosuk, T. (2009). Advanced exergetic analysis: Approaches for splitting the exergy destruction into endogenous and exogenous parts. Energy, 34 (3), 384–391. doi: 10.1016/j.energy.2008.12.007
  9. Macevityy, Yu. M., Bratuta, E. G., Kharlampidi, D. Kh., Tarasova, V. A. (2014). Sistemno-strukturnyy analiz parokompressornyh termotransformatorov. Kharkiv: Institut problem mashinostroeniya NAN Ukrainy, 269.
  10. Torres, C., Valero, A., Serra, L., Royo, J. (2002). Structural theory and thermoeconomic diagnosis. Energy Conversion and Management, 43 (9-12), 1503–1518. doi: 10.1016/s0196-8904(02)00032-8
  11. Valero, A., Usón, S., Torres, C., Valero, A. (2010). Application of Thermoeconomics to Industrial Ecology. Entropy, 12 (3), 591–612. doi: 10.3390/e12030591
  12. D’ Accadia, M. D., de Rossi, F. (1998). Thermoeconomic analysis and diagnosis of a refrigeration plant. Energy Conversion and Management, 39 (12), 1223–1232. doi: 10.1016/s0196-8904(98)00016-8
  13. Piacentino, A., Catrini, P. (2017). On Thermoeconomic Diagnosis of a Fouled Direct Expansion Coil: Effects of Induced Malfunctions on Quantitative Performance of the Diagnostic Technique. Journal of Sustainable Development of Energy, Water and Environment Systems, 5 (2), 177–190. doi: 10.13044/j.sdewes.d5.0141
  14. Torres, C., Valero, A., Rangel, V., Zaleta, A. (2008). On the cost formation process of the residues. Energy, 33 (2), 144–152. doi: 10.1016/j.energy.2007.06.007
  15. Morozyuk, T. V. (2006). Teoriya holodil'nyh mashin i teplovyh nasosov. Odessa: Negociant, 721.
  16. Dincer, I., Rosen, M. A. (Eds.) (2013). Exergy: Energy, Environment And Sustainable Development. Elsevier Ltd., 547.
  17. Tsatsaronis, Dzh. (2002). Vzaimodeystvie termodinamiki i ekonomiki dlya minimizacii stoimosti energopreobrazuyushchey sistemy. Odessa: Negociant, 152.
  18. Piacentino, A., Talamo, M. (2013). Critical analysis of conventional thermoeconomic approaches to the diagnosis of multiple faults in air conditioning units: Capabilities, drawbacks and improvement directions. A case study for an air-cooled system with 120 kW capacity. International Journal of Refrigeration, 36 (1), 24–44. doi: 10.1016/j.ijrefrig.2012.09.014
  19. Boehm, R. F. (2005). Developments in the design of thermal systems. Cambridge University Press.
  20. Chedzhne, F., Flores, V. F., Ordones, Dzh. K., Botero, E. A. (2001). Eksergoekonomicheskiy analiz system. Teploenergetika, 1, 74–79.
  21. Bobrov, D. A., Cilin, S. V., Kafarov, V. V. (1985). Topologicheskiy metod termoekonomicheskogo analiza slozhnyh energotekhnologicheskih system. Teoreticheskie osnovy himicheskoy tekhnologii, XIX (4), 525–532.

Downloads

Published

2017-10-30

How to Cite

Kharlampidi, D., Tarasova, V., Kuznetsov, M., & Voytenko, E. (2017). Thermodynamic analysis of air-compression refrigerating machine based on the exergy cost theory. Eastern-European Journal of Enterprise Technologies, 5(8 (89), 30–38. https://doi.org/10.15587/1729-4061.2017.112113

Issue

Section

Energy-saving technologies and equipment