Identification of heat exchange process in the evaporators of absorption refrigerating units under conditions of uncertainty
DOI:
https://doi.org/10.15587/1729-4061.2018.121711Keywords:
ammonia production, secondary condensation, mathematical modeling of heat exchange processes, automated systemAbstract
Analysis of the evaporator of the absorption refrigerating secondary condensation unit of ammonia production was performed. The need to minimize the temperature mode of operation of the evaporator, which provides for energy efficiency in ammonia production by decreasing natural gas consumption was substantiated. Statistical processing of experimental data with assessment of the quality of obtained information was performed. Identification of the heat exchange process of the evaporator was performed and the equation for numerical evaluation of uncertainty of coefficients of thermal efficiency, heat transfer and condensation thermal resistance was obtained. According to the results of statistical modeling of the primary condensation unit, the equation for numerical evaluation of uncertainty of ammonia concentration in circulating gas at the evaporator inlet. The authors proved the possibility of its application for identification and mathematical modeling of heat exchange process at existing relationship of ammonia concentration in the circulating gas at the evaporator inlet and condensation thermal resistance. Algorithmic support of numerical evaluation of uncertainties and calculation of target indicators of the evaporator’s efficiency was created. The technical structure of the automated system for identification and timely obtaining of the mathematical model of the evaporator, which is adapted to the existing information system of the industrial ammonia synthesis unit, was developed.
References
- Heidlage, М., Pfromm, P. (2015). Novel Thermochemical Synthesis of Ammonia and Syngas from Natural Gas. Proceeding: 2015 AIChE Annual Meeting. Salt Lake City. Available at: https://www.aiche.org/conferences/aiche-annual-meeting/2015/proceeding/paper/517b-novel-thermochemical-synthesis-ammonia-and-syngas-natural-gas
- Malhotra, A. (2012). KBR PURIFIER™ Technology and Project Execution Options for Ammonia Plants. 25th AFA International Fertilizer Technology Conference & Exhibition Sustainability Driving the Future. KBR, USA. Available at: http://s3.amazonaws.com/zanran_storage/afa.com.eg/ContentPages/2565221218.pdf
- Babichenko, A. K., Toshynskyi, V. I. (2009). Zastosuvannia matematychnoho modeliuvannia dlia diahnostyky pokaznykiv efektyvnosti protsesiv teplo-i masoobminu v absorberakh teplovykorystovuiuchykh kholodylnykh ustanovok ahrehativ syntezu amiaku. Voprosy himii i himicheskoy tekhnologii, 6, 107–111.
- Babichenko, A., Velma, V., Babichenko, J., Kravchenko, Y., Krasnikov, I. (2017). System analysis of the secondary condensation unit in the context of improving energy efficiency of ammonia production. Eastern-European Journal of Enterprise Technologies, 2 (6 (86)), 18–26. doi: 10.15587/1729-4061.2017.96464
- Zhang, Y., Fidan, B., Ioannou, P. A. (2003). Backstepping control of linear time-varying systems with known and unknown parameters. IEEE Transactions on Automatic Control, 48 (11), 1908–1925. doi: 10.1109/tac.2003.819074
- Lutska, N. M., Ladaniuk, A. P. (2016). Optymalni ta robastni systemy keruvannia tekhnolohichnymy obiektamy. Kyiv: Lira-K, 288.
- Galimova, L. B., Kayl', V. Ya., Vedeneeva, A. I. (2015). Otsenka stepeni termodinamicheskogo sovershenstva na osnove analiza raboty deystvuyushchey absorbtsionnoy holodil'noy ustanovki sistemy sinteza ammiaka. Vestnik mezhdunarodnoy akademiyi holoda, 4, 55–60.
- Shukla, A., Mishra, A., Shukla, D., Chauhan, K. (2015). C.O.P Derivation and thermodynamic calculation of ammonia-water vapor absorption refrigeration system. International journal of mechanical engineering and technology, 6 (5), 72–81.
- Demirplak, M. (2013). Uniqueness of equilibrium in the Haber synthesis of ammonia. Journal of Mathematical Chemistry, 52 (3), 899–916. doi: 10.1007/s10910-013-0300-2
- Nunes, C. A., Alvarenga, V. O., de Souza Sant’Ana, A., Santos, J. S., Granato, D. (2015). The use of statistical software in food science and technology: Advantages, limitations and misuses. Food Research International, 75, 270–280. doi: 10.1016/j.foodres.2015.06.011
- Orazbayev, B. B., Orazbayeva, K. N., Utenova, B. E. (2014). Development of mathematical models and modeling of chemical engineering systems under uncertainty. Theoretical Foundations of Chemical Engineering, 48 (2), 138–147. doi: 10.1134/s0040579514020092
- Brandt, S. (2014). Data Analysis: Statistical and Computational Methods for Scientists and Engineers. New York: Springer, 523. doi: 10.1007/978-3-319-03762-2
- Sharma, K. L. S. (2016). Overview of industrial process automation. Amsterdam: Elsevier, 492.
- Pacaux-Lemoine, M.-P., Trentesaux, D., Zambrano Rey, G., Millot, P. (2017). Designing intelligent manufacturing systems through Human-Machine Cooperation principles: A human-centered approach. Computers & Industrial Engineering, 111, 581–595. doi: 10.1016/j.cie.2017.05.014
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2018 Anatoliy Babichenko, Juliya Babichenko, Yana Kravchenko, Svitlana Velma, Igor Krasnikov, Ihor Lysachenko
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
