Development of test operations with different duration in order to improve verification quality of effectiveness formula

Authors

DOI:

https://doi.org/10.15587/1729-4061.2018.121810

Keywords:

verification of estimation indicator, operation with distributed parameters, class of operations, verification method

Abstract

Selection of an indicator for assessment of effectiveness of operations is a very essential step, because this choice predetermines the mode of operation for all functional systems at an enterprise.

An axiom is the thesis that all technological processes without exception must be optimized using a coordinated optimization criterion. This is possible only in case if the effectiveness formula is used as a unified criterion. Only in this case, maximizing of financial capabilities of an enterprise is provided.

In order to identify the original effectiveness formula among a set of estimation indicators, which cannot be distinguished based on formal features, it is necessary to use a scientifically substantiated verification method.

A limited class of models of operations with distributed parameters of different duration is determined. Creation of such a class is the most difficult problem, since comparison of operations of different duration requires taking into account the time factor, and the distributed nature of resource consumption and resource transfer in time significantly complicates the problem.

To solve this problem, at the first stage, the rules of composition of an operation with distributed parameters using simple global models of operations with different duration were determined. At the second stage, for each simple model of an operation, there was formed a correspondent simple model of an operation with a longer duration, effectiveness of which was higher than that of the original operation by definition.

At the final stage, we formed a limited class of global models of operations with distributed parameters of different duration with the use of the original and formed simple models of operations.

Development of verification method by determining the class of operations with distributed parameters of different duration significantly enhances reliability and validity of results of verification of the estimation indicator, which is supposed to be used as an effectiveness indicator and an optimization criterion.

Author Biographies

Ihor Lutsenko, Kremenchuk Mykhailo Ostrohradskyi National University Pershotravneva str., 20, Kremenchuk, Ukraine, 39600

Doctor of Technical Sciences, Professor

Department of Information and Control Systems

Olena Fomovskaya, Kremenchuk Mykhailo Ostrohradskyi National University Pershotravneva str., 20, Kremenchuk, Ukraine, 39600

PhD, Associate Professor, Head of Department

Department of Electronic Devices

Elena Vihrova, Kryvyi Rih State Pedagogical University Gagarina ave., 54, Kryvyi Rih, Ukraine, 50086

PhD, Associate Professor

Department of Mathematics and techniques of its teaching 

Olga Serdiuk, Kremenchuk Mykhailo Ostrohradskyi National University Pershotravneva str., 20, Kremenchuk, Ukraine, 39600

Assistant

Department of Electronic Devices

Felix Fomovsky, Kremenchuk Mykhailo Ostrohradskyi National University Pershotravneva str., 20, Kremenchuk, Ukraine, 39600

PhD, Associate Professor

Department of Electronic Devices

References

  1. Drucker, P. F. (1986). Management: Tasks, Responsibilities, Practices. Truman Talley Books, 553.
  2. Parkinson, A. R., Balling, R. J., Hedengren, J. D. (2013). Optimization Methods for Engineering Design. Applications and Theory. Brigham Young University, 208. Available at: http://apmonitor.com/me575/uploads/Main/optimization_book.pdf
  3. Lutsenko, I., Fomovskaya, E., Koval, S., Serdiuk, O. (2017). Development of the method of quasi-optimal robust control for periodic operational processes. Eastern-European Journal of Enterprise Technologies, 4 (2 (88)), 52–60. doi: 10.15587/1729-4061.2017.107542
  4. Lutsenko, I., Fomovskaya, O., Konokh, I., Oksanych, I. (2017). Development of a method for the accelerated two-stage search for an optimal control trajectory in periodical processes. Eastern-European Journal of Enterprise Technologies, 3 (2 (87)), 47–55. doi: 10.15587/1729-4061.2017.103731
  5. Lutsenko, I., Tytiuk, V., Oksanych, I., Rozhnenko, Z. (2017). Development of the method for determining optimal parameters of the process of displacement of technological objects. Eastern-European Journal of Enterprise Technologies, 6 (3 (90)), 41–48. doi: 10.15587/1729-4061.2017.116788
  6. Grechnikova, S. (2014). Historical Transformation of the «Labour Efficiency» Scientific Category. Management of the Personnel and Intellectual Resources in Russia, 3 (4), 9–12. doi: 10.12737/5416
  7. Denisov, V. T., Medvedeva, Yu. P., Denisov, D. D., Reznik, A. E. (2010). Sushchnost' effektivnosti i ee povyshenie. Povolzhskiy torgovo-ekonomicheskiy zhurnal, 3, 6–13
  8. Morkun, V., Morkun, N., Tron, V., Hryshchenko, S. (2017). Investigation of the effect of characteristics of gas-containing suspensions on the parameters of the process of ultrasonic wave propagation. Eastern-European Journal of Enterprise Technologies, 6 (5 (90)), 49–58. doi: 10.15587/1729-4061.2017.118943
  9. Ivanov, A. A. (2015). Genezis ponyatiya effektivnosti v svete obshchestvenno-ekonomicheskih transformaciy. Vestnik Omskogo Universiteta. Seriya: Ekonomika, 4, 29–37.
  10. Evdokimova, T. V. (2013). Analiz genezisa teoreticheskih podhodov k ponyatiyu i ocenke effektivnosti. Vestnik Tomskogo gosudarstvennogo universiteta. Ekonomika, 3 (23), 22–27.
  11. Wu, Y., Cheng, T. C. E. (2006). Henig efficiency of a multi-criterion supply-demand network equilibrium model. Journal of Industrial and Management Optimization, 2 (3), 269–286. doi: 10.3934/jimo.2006.2.269
  12. Anishchenka, U. V., Kryuchkov, A. N., Kul’bak, L. I., Martinovich, T. S. (2008). Optimization of the structure of multifunctional information systems according to the criterion of a required value of the efficiency ratio. Automatic Control and Computer Sciences, 42 (4), 203–209. doi: 10.3103/s0146411608040068
  13. Miskowicz, M. (2010). Efficiency of Event-Based Sampling According to Error Energy Criterion. Sensors, 10 (3), 2242–2261. doi: 10.3390/s100302242
  14. Xu, Q., Wehrle, E., Baier, H. (2012). Adaptive surrogate-based design optimization with expected improvement used as infill criterion. Optimization, 61 (6), 661–684. doi: 10.1080/02331934.2011.644286
  15. Xia, L. (2016). Optimization of Markov decision processes under the variance criterion. Automatica, 73, 269–278. doi: 10.1016/j.automatica.2016.06.018
  16. Carravetta, A., Fecarotta, O., Conte, M. C. (2017). Minimum Efficiency Index: testing its performance. World Pumps, 2017 (4), 34–37. doi: 10.1016/s0262-1762(17)30141-4
  17. Morkun, V., Gubin, G., Oliinyk, T., Lotous, V., Ravinskaia, V., Tron, V. et. al. (2017). High-energy ultrasound to improve the quality of purifying the particles of iron ore in the process of its enrichment. Eastern-European Journal of Enterprise Technologies, 6 (12 (90)), 41–51. doi: 10.15587/1729-4061.2017.118448
  18. Indah Komalasari, R., Purwanto, P., Suharyanto, S. (2014). Green Building Assessment Based on Energy Efficiency and Conservation (EEC) Category at Pascasarjana B Building Diponegoro University, Semarang. American Journal of Energy Research, 2 (2), 42–46. doi: 10.12691/ajer-2-2-4
  19. Shorikov, A. F., Rassadina, E. S. (2010). Multi-criterion optimization of production range generation by an enterprise. Economy of Region, 2, 189–196. doi: 10.17059/2010-2-18
  20. Morkun, V., Savytskyi, O., Tymoshenko, M. (2015). Optimization of the second and third stages of grinding based on fuzzy control algorithms. Metallurgical and Mining Industry, 8, 22–25.
  21. Mansour, M. R., Delbem, A. C. B., Alberto, L. F. C., Ramos, R. A. (2015). Integrating Hierarchical Clustering and Pareto-Efficiency to Preventive Controls Selection in Voltage Stability Assessment. Evolutionary Multi-Criterion Optimization, 487–497. doi: 10.1007/978-3-319-15892-1_33
  22. Solopov, R. V. (2017). Criterion complex optimization in electric-power systems. Russian Electrical Engineering, 88 (5), 280–284. doi: 10.3103/s1068371217050133
  23. Lutsenko, I., Fomovskaya, E., Oksanych, I., Vikhrova, E., Serdiuk, O. (2017). Formal signs determination of efficiency assessment indicators for the operation with the distributed parameters. Eastern-European Journal of Enterprise Technologies, 1 (4 (85)), 24–30. doi: 10.15587/1729-4061.2017.91025
  24. Lutsenko, I., Vihrova, E., Fomovskaya, E., Serdiuk, O. (2016). Development of the method for testing of efficiency criterion of models of simple target operations. Eastern-European Journal of Enterprise Technologies, 2 (4 (80)), 42–50. doi: 10.15587/1729-4061.2016.66307
  25. Zaloga, V. A., Nagorniy, V. M., Nagorniy, V. V. (2016). Kontrol' dinamicheskogo sostoyaniya metalloobrabatyvayushchey tekhnologicheskoy sistemy i prognozirovanie ee resursa. Sumy: Sumskiy gosudarstvennyy universitet, 242.
  26. Mihaylov, V. V. (1973). Nadezhnost' elektrosnabzheniya promyshlennyh predpriyatiy. Moscow: Energiya, 168.
  27. Lutsenko, I., Fomovskaya, E., Oksanych, I., Koval, S., Serdiuk, O. (2017). Development of a verification method of estimated indicators for their use as an optimization criterion. Eastern-European Journal of Enterprise Technologies, 2 (4 (86)), 17–23. doi: 10.15587/1729-4061.2017.95914
  28. Lutsenko, I. (2016). Definition of efficiency indicator and study of its main function as an optimization criterion. Eastern-European Journal of Enterprise Technologies, 6 (2 (84)), 24–32. doi: 10.15587/1729-4061.2016.85453
  29. Programma dlya rascheta effektivnosti operaciy. Available at: https://ru.files.fm/f/m4848k6k

Downloads

Published

2018-01-29

How to Cite

Lutsenko, I., Fomovskaya, O., Vihrova, E., Serdiuk, O., & Fomovsky, F. (2018). Development of test operations with different duration in order to improve verification quality of effectiveness formula. Eastern-European Journal of Enterprise Technologies, 1(4 (91), 42–49. https://doi.org/10.15587/1729-4061.2018.121810

Issue

Vol. 1 No. 4 (91) (2018): Mathematics and Cybernetics - applied aspects

Section

Mathematics and Cybernetics - applied aspects

License

Copyright (c) 2018 Ihor Lutsenko, Olena Fomovskaya, Elena Vihrova, Olga Serdiuk, Felix Fomovsky

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.