Structure and properties of composites based on polypropylene and polymer-silicate modifier
DOI:
https://doi.org/10.15587/1729-4061.2011.1250Keywords:
Рolivinlpirolidon-silicate modifier, polypropylene, the degree of crystallinityAbstract
The effects of nature of modifier basis on the polyvinylpirrolidone and sodium water glass on the morphology and properties of polypropylene are found. Found that modification of polypropylene increases the degree of crystallinity, the boundary strength at breaking, heat resistance and heat resistanceReferences
- Кербер М.Л.. Полимерные композиционные материалы / М.Л. Кербер и др. . - СПБ.: Профессия 2008. - 560 с.
- Kawasumi M. The discovery of polymer hybrids // J. Polym. Sci. A. – 2004. – Vol.42, №4. – P. 819-824.
- Ганчо А.В., Левицький В.Є., Суберляк О.В. Фізико-хімічні закономірності формування полівінілпіролідон-силікатних нанокомпозиційних матеріалів // Вопросы химии и химической технологии. – 2010. – № 6. – С.55 – 60.
- Ганчо А.В., Левицький В.Є. Закономірності одержання полівінілпіролідон-силікатних матеріалів з водних розчинів // Вісник НУ “Львівська політехніка”, “Хімія, технологія речовин та їх застосування”. – 2010. – № 667. – С. 448 – 451. 5. Трофимов Н.Н., М.З.Канович и др. Физика композиционных материалов. М.: Мир, 2005, т.1,2.
- Дж.Л. Уайт, Д.Д. Чой Полиэтилен, полипропилен и другие полиолефины / пер. с англ. яз. под. ред. Е.С. Цобкалло — СПб.: Профессия, 2006. 7. Rabiej M., Rabiej S. Analiza rentgenowskich krywych dyfrakcyjnych polymerów za pomoca programu komputerowego WAXSFIT/ M. Rabiej, S. Rabiej; Bielsko-Biała. – Warszawa, 2006. – 133 p.
Downloads
How to Cite
Issue
Section
License
Copyright (c) 2014 Володимир Євстахович Левицький, Андрій Володимирович Ганчо, Андрій Сергійович Масюк
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
