Classification of details for quality of their superficial layer management
DOI:
https://doi.org/10.15587/1729-4061.2011.1255Keywords:
Сapacity, oscillation work-hardening, wear, quality managementAbstract
Classification of details of machines which a quality of material of their superficial layers management is actual for is givenReferences
- Гаркунов Д.Н. Триботехника/ Д.Н. Гаркунов.– М.: Машиностроение, 1989. – 327с.
- Костюк Г.И. Новые пути создание поверхностных слоев деталей с заданными физико-механическими свойствами/ Г.И. Костюк, А.К. Мялица, И.Г. Левченко, А.А. Некрасов, А.К. Горлов// Труды международной конференции «Новые технологии в машиностроении». – Харьков – Рыбачье. – 1996. – С.236-243.
- Воробьёв Л.Н. Технология машиностроения и ремонт машин/ Л.Н.Воробьев. – М. Машиностроение, 1986. – 224 с.
- Антонюк В.С. Новое в формировании упрочняющих покрытий./ В.С. Антонюк, М.С. Дигам// Сучасне машинобудування. №1 – 1999. – С.105-110.
- Дудников А.А. Проверка условий подобия стендовых и эксплуатационных испытаний рабочих органов свеклоуборочных машин / А.А. Дудников, А.И. Беловод, И.А. Дудников // Вісник ПДАА. – Полтава, 2006. – №4. – С. 48-50
- Дудников И.А. Повышение долговечности восстановленных деталей пластическим деформированием / И.А. Дудніков, А.И Беловод // Зб. наук. праць ТАДА. Мелітополь, 2006. – С. 42-44.
- Дудников А.А. Виды износов деталей сельскохозяйственных машин в процессе эксплуатации/ А.А. Дудников, И.А. Дудніков, А.И. Беловод // Вісник ХДТУСГ ім. П.Василенка: Механізація сільськогосподарського виробництва. Вип. 44.Т.2. – Харків, 2006. – С. 264-269.
- Крагельский И.В. Трение и изнашивание/ И.В. Крагельский. –М.: Машиностроение, 1988. – 420с.
Downloads
How to Cite
Issue
Section
License
Copyright (c) 2014 Игорь Анатолиевич Дудников
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
