Studying the influence of the intensity of mechanochemical activation on the process of steam conversion of coal

Authors

DOI:

https://doi.org/10.15587/1729-4061.2018.136371

Keywords:

aerosol nanocatalysis, mechanochemical activation, catalytic system, composition of synthesis-gas, steam conversion

Abstract

We continue to study the process of converting coal into synthesis-gas under conditions of aerosol nanocatalysis and reasonably expect would-be benefits of industrial technology. The advantages include a possibility to change the rate of reaction by influencing the intensity of mechanochemical activation of the catalyst. We investigated the process in a reactor where the mechanochemical activation is performed by the rotation of the catalytic system. The effect of activation intensity on chemical reactions under conditions of aerosol nanocatalysis has been proven earlier for the fluidized and vibro-liquefied layer of the catalytic system. Previous studies have shown that the mechanochemical activation affects the composition of conversion products, namely the ratio of СО:Н2. That would make it possible in the future to quickly reorient the production of synthesis-gas in line with the needs of market for organic products. The research results showed that at a temperature of 750 °C, 1 bar, MCA intensity of 2‒4 Hz and with an excess of coal (С:Н2О=5.5:1), the obtained ratio СО:Н2=1:1.99–1:.2,10 can be used for obtaining alcohols. At a temperature of 750 °C, 1 bar, MCA intensity of 0‒1 Hz and with an excess of coal (С:Н2О=5.5:1), the obtained ratio СО:Н2=1:1.19–1:1.35 can be applied for obtaining esters. We also noted the possibility of obtaining synthesis-gas with a ratio of 1:2.3 (2.5), which can be applied for obtaining hydrocarbons. This ratio was derived in the following mode: temperature 750 °C, pressure 1 bar, the ratio coal:water=1:0.87, MCA intensity 3‒4 Hz. The specified process to obtain hydrocarbons was investigated at 230 °C, 1 bar, in a vibro-liquefied layer of the catalyst aerosol at ratio СО:Н2=1:3 at 3 Hz and СО:Н2=1:2 at 3 and 5 Hz. The results of this paper are continuation of a global study into coal processing with obtaining the required industrial product. This special feature is the advantage of conducting a given process based on the aerosol nanocatalysis technology

Author Biographies

Artur Luhovskoi, Volodymyr Dahl East Ukrainian National University Centralnyi аve., 59-a, Severodonetsk, Ukraine, 93400

Postgraduate student

Department of chemical engineering and ecology

Marat Glikin, Volodymyr Dahl East Ukrainian National University Centralnyi аve., 59-a, Severodonetsk, Ukraine, 93400

Doctor of Technical Sciences, Professor

Department of chemical engineering and ecology

Sergey Kudryavtsev, Volodymyr Dahl East Ukrainian National University Centralnyi аve., 59-a, Severodonetsk, Ukraine, 93400

PhD, Associate Professor

Department of chemical engineering and ecology

Irene Glikina, Volodymyr Dahl East Ukrainian National University Centralnyi аve., 59-a, Severodonetsk, Ukraine, 93400

Doctor of Technical Sciences, Professor

Department of chemical engineering and ecology

References

  1. Luhovskoi, A., Glikin, M., Kudryavtsev, S., Glikina, I. (2017). Obtaining synthesis-gas by the stone coal steam conversion using technology of aerosol nanocatalysis. Eastern-European Journal of Enterprise Technologies, 6 (6 (90)), 53–58. doi: https://doi.org/10.15587/1729-4061.2017.118396
  2. Glikin, M. A. (1996). Aerosol Catalysis. Theoretical Foundations of Chemical Technology, 30 (4), 430–435.
  3. Borshchev, V. Ya. (2004). Equipment for grinding materials: crushers and mills. Tambov: publishing house of Tambov State Technical University, 75.
  4. Klabunde, K. J. (Ed.) (2001). Nanoscale materials in chemistry. New York: F John. Wiley & Sons Inc., 807.
  5. Kopylov, N. I., Kaminsky, U. D., Dugarzhav, J., Avid, B., Patrushev, U. V.(2015). Products of Thermolysis of Tavantolgoy Black Coal. Chemistry for Sustainable Development, 23 (3), 235–246. doi: https://doi.org/10.15372/khur20150302
  6. Fedorova, N. I., Lyrshchikov, S. U., Khitsova, L. M., Ismagilov, Z. R. (2015). Composition and Physicochemical Properties of Coal Fractions with Different Densities. Chemistry for Sustainable Development, 23 (2), 111–115. doi: https://doi.org/10.15372/khur20150201
  7. Kopytov, M. A., Golovko, A. K. (2013). Cracking of a mixture of mechanically treated brown coal and petroleum residue. Solid Fuel Chemistry, 47 (5), 26–30.
  8. Bogomolov, A. R., Shevyrev, S. A., Alekseev, M. V. (2013). Prospects for high-temperature gasification of coal and sludge. Thermal Engineering, 2, 77–80. doi: https://doi.org/10.1134/s0040363612080024
  9. Mongush, G. R. (2017). Analysis of technical indicators of products of fractional separation of the kaa-khem’s coal. Modern high technologies, 11, 47–51. doi: https://doi.org/10.17513/snt.36843
  10. Kudryashov, A., Kulagin, N., Sinitskaya, A., Bibikova, I. (2017). Assessing possibility of burning zheronsky coal by Ust-Ilim CHP boiler units BKZ-420-140PT-2. Proceedings of Irkutsk State Technical University, 21 (2), 106–117. doi: https://doi.org/10.21285/1814-3520-2017-2-106-117
  11. Vidian, F., Novia, Suryatra, A. (2017). Combustion of producer gas from gasification of south Sumatera lignite coal using CFD simulation. MATEC Web of Conferences, 101, 02015. doi: https://doi.org/10.1051/matecconf/201710102015
  12. Olek, M., Kandefer, S., Kaniowski, W., Żukowski, W., Baron, J. (2014). Carbon Shale Combustion in the Fluidized Bed Reactor. Polish Journal of Chemical Technology, 16 (2). doi: https://doi.org/10.2478/pjct-2014-0033
  13. Wang, Z., Wang, S., Zhang, Q., Fang, Q., Chen, W. (2016). Influence of Environmentally Friendly and High-Efficiency Composite Additives on Pulverized Coal Combustion in Cement Industry. Journal of Combustion, 2016, 1–7. doi: https://doi.org/10.1155/2016/8205945
  14. Chang, T., Guo, Q., Hao, H., Wu, B., Yang, Y. (2017). Formation of radicals in coal pyrolysis examined by electron spin resonance. AIP Advances, 7 (9), 095303. doi: https://doi.org/10.1063/1.4986270
  15. Kazawadi, D., John, G. R., King’ondu, C. K. (2014). Experimental Investigation of Thermal Characteristics of Kiwira Coal Waste with Rice Husk Blends for Gasification. Journal of Energy, 2014, 1–8. doi: https://doi.org/10.1155/2014/562382
  16. Kim, J., Oh, H., Lee, S., Yoon, Y.-S. (2018). Advanced One-Dimensional Entrained-Flow Gasifier Model Considering Melting Phenomenon of Ash. Energies, 11 (4), 1015. doi: https://doi.org/10.3390/en11041015
  17. Kudryavtsev, S. A., Glikin, M. A., Glikina, I. M., Zaika, R. G., Mamedov B. B. (2006). Cracking of crude oil using the technology of aerosol nanocatalysis (AnC). Materials of the V international scientific and technical conference "Ukrkataliz-V", 9–12.
  18. Wilson, M., Kannangara Geoff Smith, K., Simmons, M., Raguse, B. (2002). Nanotechnology. Basic science and emerging technnologies. Boca Raton: A CRC Press Co, 290. doi: https://doi.org/10.1201/9781420035230
  19. Rapoport, F. M., Il'inskaya, A. A. (1963). Laboratory methods for obtaining pure gases. Мoscow: Goskhimizdat, 420.
  20. Glikina, I. M., Shershnev, S. A., Glikin, M. A., Zhitnitsky, A. L. (2012). Synthesis of hydrocarbons using aerosol nanocatalysis technology. Effect of vibration and temperature on the process. Chemical promyslovosti of Ukraine, 1 (108), 10–15.
  21. Storch, G., Golambik, N., Anderson, R.; Bashkirov, А. N. (Ed.) (1954). Synthesis of hydrocarbons from carbon monoxide and hydrogen. Мoscow: Publishing. in. lit, 516.

Downloads

Published

2018-07-20

How to Cite

Luhovskoi, A., Glikin, M., Kudryavtsev, S., & Glikina, I. (2018). Studying the influence of the intensity of mechanochemical activation on the process of steam conversion of coal. Eastern-European Journal of Enterprise Technologies, 4(6 (94), 56–62. https://doi.org/10.15587/1729-4061.2018.136371

Issue

Vol. 4 No. 6 (94) (2018): Technology organic and inorganic substances

Section

Technology organic and inorganic substances

License

Copyright (c) 2018 Artur Luhovskoi, Marat Glikin, Sergey Kudryavtsev, Irene Glikina

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.