Establishment of heat­exchange process regularities at inflammation of reed samples

Authors

  • Yuriy Tsapko National University of Life and Environmental Sciences of Ukraine Heroiv Oborony str., 15, Kyiv, Ukraine, 03041 Scientific-Research Institute for Binders and Materials named after V. D. Glukhovsky Kyiv National University of Construction and Architecture Povitroflotsky ave., 31, Kyiv, Ukraine, 03037, Ukraine https://orcid.org/0000-0003-0625-0783
  • Аleksii Tsapko National University of Life and Environmental Sciences of Ukraine Heroiv Oborony str., 15, Kyiv, Ukraine, 03041, Ukraine https://orcid.org/0000-0003-2298-068X
  • Olga Bondarenko Kyiv National University of Construction and Architecture Povitroflotsky ave., 31, Kyiv, Ukraine, 03037, Ukraine https://orcid.org/0000-0002-8164-6473

DOI:

https://doi.org/10.15587/1729-4061.2019.156644

Keywords:

fire protection of reed, flame retardant coatings, heat conduction, surface treatment, thermophysical properties

Abstract

The conducted studies into the influence of induction period on reed inflammation have established the mechanisms of the process of heat transfer to material which makes it possible to influence this process. It was proved that these mechanisms consist in heating material to a critical temperature at which an intensive decomposition of the material occurs with release of a critical amount of combustible gases and their inflammation. This makes it possible to establish effect of fire protection and properties of roofing formulations on inhibition of the reed inflammation process. Experimental studies have confirmed that untreated reed inflames under thermal action in 58 seconds which is respectively equal to the induction period of material decomposition and flame spreads throughout the material surface which results in a complete combustion of material. Duration of the induction period extends to 587.45 s due to decomposition of flame retardants under thermal action with emission of non-combustible gases inhibiting material oxidation and significantly intensifying formation of a heat protective layer of coke on the reed surface. This leads to a growth of the coke layer thickness and inhibition of heat transfer from high temperature flame to the material. The study has made it possible to determine conditions of fire protection of reed by creating a barrier for thermal conductivity. In addition, when a flame-retardant protection coating is applied, the temperature effect manifests itself in reactions in the pre-flame region with formation of soot-like products on the surface of a natural combustible material. This gives grounds to assert that the mechanism of imparting fire protection properties to the reed by means of bloating formulations is feasible and that the proposed technological solutions have practical attractiveness. The latter, in particular, relate to determination of quantity of the polymeric component since the reed is characterized by hydrophobicity and the aqueous solution of the flame detergent flows off the surface. Thus, there are grounds to assert that the controlled fire protection of reed can be ensured through the use of a complex roofing formulation of a mixture of flame retardants and a natural polymer capable of forming a flame-retardant film on the material surface

Author Biographies

Yuriy Tsapko, National University of Life and Environmental Sciences of Ukraine Heroiv Oborony str., 15, Kyiv, Ukraine, 03041 Scientific-Research Institute for Binders and Materials named after V. D. Glukhovsky Kyiv National University of Construction and Architecture Povitroflotsky ave., 31, Kyiv, Ukraine, 03037

Doctor of Technical Sciences

Аleksii Tsapko, National University of Life and Environmental Sciences of Ukraine Heroiv Oborony str., 15, Kyiv, Ukraine, 03041

Posgraduate student

Department of Technology and Design of Wood Products

Olga Bondarenko, Kyiv National University of Construction and Architecture Povitroflotsky ave., 31, Kyiv, Ukraine, 03037

PhD, Associate Professor

Department of Building Materials

References

  1. Tsapko, Y., Tsapko, А. (2018). Modeling a thermal conductivity process under the action of flame on the wall of fire­retardant reed. Eastern-European Journal of Enterprise Technologies, 2 (10 (92)), 50–56. doi: https://doi.org/10.15587/1729-4061.2018.128316
  2. Tsapko, Y., Tsapko, А. (2018). Establishment of fire protective effectiveness of reed treated with an impregnating solution and coatings. Eastern-European Journal of Enterprise Technologies, 4 (10 (94)), 62–68. doi: https://doi.org/10.15587/1729-4061.2018.141030
  3. Tsapko, J., Tsapko, А. (2017). Simulation of the phase transformation front advancement during the swelling of fire retardant coatings. Eastern-European Journal of Enterprise Technologies, 2 (11 (86)), 50–55. doi: https://doi.org/10.15587/1729-4061.2017.73542
  4. Tsapko, Y., Tsapko, А. (2017). Influence of dry mixtures in a coating on the effectiveness of wood protection from the action of a magnesium flame. Eastern-European Journal of Enterprise Technologies, 5 (10 (89)), 55–60. doi: https://doi.org/10.15587/1729-4061.2017.111106
  5. Krüger, S., Gluth, G. J. G., Watolla, M.-B., Morys, M., Häßler, D., Schartel, B. (2016). Neue Wege: Reaktive Brandschutzbeschichtungen für Extrembedingungen. Bautechnik, 93 (8), 531–542. doi: https://doi.org/10.1002/bate.201600032
  6. Xiao, N., Zheng, X., Song, S., Pu, J. (2014). Effects of Complex Flame Retardant on the Thermal Decomposition of Natural Fiber. BioResources, 9 (3). doi: https://doi.org/10.15376/biores.9.3.4924-4933
  7. Nine, M. J., Tran, D. N. H., Tung, T. T., Kabiri, S., Losic, D. (2017). Graphene-Borate as an Efficient Fire Retardant for Cellulosic Materials with Multiple and Synergetic Modes of Action. ACS Applied Materials & Interfaces, 9 (11), 10160–10168. doi: https://doi.org/10.1021/acsami.7b00572
  8. Cirpici, B. K., Wang, Y. C., Rogers, B. (2016). Assessment of the thermal conductivity of intumescent coatings in fire. Fire Safety Journal, 81, 74–84. doi: https://doi.org/10.1016/j.firesaf.2016.01.011
  9. Carosio, F., Kochumalayil, J., Cuttica, F., Camino, G., Berglund, L. (2015). Oriented Clay Nanopaper from Biobased Components – Mechanisms for Superior Fire Protection Properties. ACS Applied Materials & Interfaces, 7 (10), 5847–5856. doi: https://doi.org/10.1021/am509058h
  10. Gillani, Q. F., Ahmad, F., Mutalib, M. I. A., Melor, P. S., Ullah, S., Arogundade, A. (2016). Effect of Dolomite Clay on Thermal Performance and Char Morphology of Expandable Graphite Based Intumescent Fire Retardant Coatings. Procedia Engineering, 148, 146–150. doi: https://doi.org/10.1016/j.proeng.2016.06.505
  11. Md Nasir, K., Ramli Sulong, N. H., Johan, M. R., Afifi, A. M. (2018). An investigation into waterborne intumescent coating with different fillers for steel application. Pigment & Resin Technology, 47 (2), 142–153. doi: https://doi.org/10.1108/prt-09-2016-0089
  12. Carosio, F., Alongi, J. (2016). Ultra-Fast Layer-by-Layer Approach for Depositing Flame Retardant Coatings on Flexible PU Foams within Seconds. ACS Applied Materials & Interfaces, 8 (10), 6315–6319. doi: https://doi.org/10.1021/acsami.6b00598
  13. Fan, F., Xia, Z., Li, Q., Li, Z. (2013). Effects of inorganic fillers on the shear viscosity and fire retardant performance of waterborne intumescent coatings. Progress in Organic Coatings, 76 (5), 844–851. doi: https://doi.org/10.1016/j.porgcoat.2013.02.002
  14. Loycyanskiy, L. G. (1970). Mekhanika zhidkosti i gaza. Moscow: Nedra, 904.
  15. Fel'dman, L. P., Svyatniy, V. A., Kasimov, O. I. (1971). Issledovanie utechek vozduha cherez vyrabotannoe prostranstvo uchastka metodami matematicheskogo modelirovaniya. Razrabotka mestorozhdeniy poleznyh iskopaemyh, 22, 105–110.
  16. Perel'man, V. I. (1963). Kratkiy spravochnik himika. Moscow: Goskhimizdat, 624.

Downloads

Published

2019-02-14

How to Cite

Tsapko, Y., Tsapko А., & Bondarenko, O. (2019). Establishment of heat­exchange process regularities at inflammation of reed samples. Eastern-European Journal of Enterprise Technologies, 1(10 (97), 36–42. https://doi.org/10.15587/1729-4061.2019.156644