Improvement of the inverse dynamics method for high-precision control of nonlinear objects under conditions of uncertainty

Authors

DOI:

https://doi.org/10.15587/1729-4061.2019.160345

Keywords:

automatic control system, method of minimization of local functionals, tethered underwater vehicle

Abstract

Synthesis of automatic control systems (ACS) of nonlinear objects is a well-known scientific problem. The method of inverse dynamics makes it possible to synthesize high-precision ACSs of nonlinear objects. However, under conditions of uncertainty, control quality is significantly compromised and ACS does not fulfill the set task. The result of present research is the further elaborated method of inverse dynamics for the synthesis of high-precision ACS of nonlinear objects under conditions of uncertainty. We have synthesized a generalized structure of the inverse control law as a basis for control of nonlinear objects under conditions of uncertainty. Under this structure, the inverse control law is built based on an imprecise inverse model of the object of control and contains an uncertain component of controlling influence to compensate for uncertainties. We have synthesized a law to compensate for uncertainties based on the method of minimizing local functionals. It includes an imprecise model of the object of control and ensures that its output approaches the controlled magnitude. The compensation law makes it possible for ACS to operate under conditions of uncertainty and, at the proper choice of reference models, to provide for a high dynamic accuracy in control over a nonlinear object. We have synthesized ACS of the vertical movement of a tethered remotely operated underwater vehicle. The synthesis was implemented based on an imprecise model of the object of control. The model's order was one order of magnitude less than the object’s order; part of the model responsible for generating a controlling force was considerably simplified; the disturbing influences of a tether-cable were not taken into consideration. Thus, the structural and parametrical uncertainties were accounted for. The dynamics of ACS transient processes were studied based on computer implementation of the model of one-dimensional motion of a remotely operated underwater vehicle as a third-order object taking into account the disturbing influence of a tether-cable. Results of computer experiment showed high dynamic accuracy of ACS under conditions of structural and parametrical uncertainties of the control object's model under the influence of uncertain disturbances of a tether-cable

Author Biographies

Oleksandr Blintsov, Admiral Makarov National University of Shipbuilding Heroiv Ukrainy ave., 9, Mykolaiv, Ukraine, 54025

Doctor of Technical Sciences, Associate Professor

Department of Computer Technologies and Information Security

Zhanna Burunina, Admiral Makarov National University of Shipbuilding Heroiv Ukrainy ave., 9, Mykolaiv, Ukraine, 54025

PhD, Associate Professor

Department of Physics

Andrii Voitasyk, Admiral Makarov National University of Shipbuilding Heroiv Ukrainy ave., 9, Mykolaiv, Ukraine, 54025

Senior Lecturer

Department of Electrical Engineering of Ship and Robotic Systems

References

  1. Boychuk, L. M. (1971). Metod strukturnogo sinteza nelineynyh sistem avtomaticheskogo upravleniya. Moscow: «Energiya», 112.
  2. Dudykevych, V., Blintsov, O. (2016). Tasks statement for modern automatic control theory of underwater complexes with flexible tethers. EUREKA: Physics and Engineering, 5, 25–36. doi: https://doi.org/10.21303/2461-4262.2016.00158
  3. Voytkunskiy, Ya. I. (Ed.) (1985). Spravochnik po teorii korablya. Vol. 1. Leningrad: Sudostroenie, 768.
  4. Blintsov, O. (2017). Development of the mathematical modeling method for dynamics of the flexible tether as an element of the underwater complex. Eastern-European Journal of Enterprise Technologies, 1 (7 (85)), 4–14. doi: https://doi.org/10.15587/1729-4061.2017.90291
  5. Kuhn, V. N., Drews, P. L. J., Gomes, S. C. P., Cunha, M. A. B., Botelho, S. S. da C. (2014). Automatic control of a ROV for inspection of underwater structures using a low-cost sensing. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 37 (1), 361–374. doi: https://doi.org/10.1007/s40430-014-0153-z
  6. Hernández-Alvarado, R., García-Valdovinos, L., Salgado-Jiménez, T., Gómez-Espinosa, A., Fonseca-Navarro, F. (2016). Neural Network-Based Self-Tuning PID Control for Underwater Vehicles. Sensors, 16 (9), 1429. doi: https://doi.org/10.3390/s16091429
  7. Nejatbakhsh Esfahani, H., Azimirad, V., Danesh, M. (2015). A Time Delay Controller included terminal sliding mode and fuzzy gain tuning for Underwater Vehicle-Manipulator Systems. Ocean Engineering, 107, 97–107. doi: https://doi.org/10.1016/j.oceaneng.2015.07.043
  8. Herman, P., Adamski, W. (2017). Non-adaptive velocity tracking controller for a class of vehicles. Bulletin of the Polish Academy of Sciences Technical Sciences, 65 (4), 459–468. doi: https://doi.org/10.1515/bpasts-2017-0051
  9. Thekkedan, M. D., Chin, C. S., Woo, W. L. (2015). Virtual reality simulation of fuzzy-logic control during underwater dynamic positioning. Journal of Marine Science and Application, 14 (1), 14–24. doi: https://doi.org/10.1007/s11804-015-1297-7
  10. Xia, G., Pang, C., Xue, J. (2015). Fuzzy neural network-based robust adaptive control for dynamic positioning of underwater vehicles with input dead-zone. Journal of Intelligent & Fuzzy Systems, 29 (6), 2585–2595. doi: https://doi.org/10.3233/ifs-151961
  11. Fernandes, D. de A., Sørensen, A. J., Pettersen, K. Y., Donha, D. C. (2015). Output feedback motion control system for observation class ROVs based on a high-gain state observer: Theoretical and experimental results. Control Engineering Practice, 39, 90–102. doi: https://doi.org/10.1016/j.conengprac.2014.12.005
  12. Londhe, P. S., Santhakumar, M., Patre, B. M., Waghmare, L. M. (2015). Robust nonlinear task space position tracking control of an autonomous underwater vehicle-manipulator system. 2015 IEEE International Conference on Advanced Intelligent Mechatronics (AIM). doi: https://doi.org/10.1109/aim.2015.7222793
  13. Blintsov, O. (2016). Formation of a reference model for the method of inverse dynamics in the tasks of control of underwater complexes. Eastern-European Journal of Enterprise Technologies, 4 (2 (82)), 42–50. doi: https://doi.org/10.15587/1729-4061.2016.74875
  14. Krut'ko, P. D. (2004). Obratnye zadachi dinamiki v teorii avtomaticheskogo upravleniya. Cikl lekciy. Moscow: Mashinostroenie, 576.
  15. Blintsov, V., Voitasyk, A. (2016). The robotized underwater technology for the installation of a useful cargo onto sea bottom. Pidvodni tekhnolohiyi. Promyslova ta tsyvilna inzheneriya, 4, 50–59.
  16. Pavlov, H. V., Blintsov, O. V. (2008). Syntez neiromerezhnykh modelei elektrorushiinoho prystroiu dlia zadach keruvannia kvazistatsionarnym rukhom pryviaznoho pidvodnoho aparata. Zbirnyk naukovykh prats Natsionalnoho universytetu korablebuduvannia, 5 (422), 81–86.
  17. Blintsov, O. V., Nadtochiy, V. A. (2014). Avtomatyzatsiya keruvannia odnolankovymy samokhidnymy pryviaznymy pidvodnymy systemamy. Mykolaiv: NUK, 124.
  18. Denisenko, V. V. (2009). Komp'yuternoe upravlenie tekhnologicheskim processom, eksperimentom, oborudovaniem. Moscow: Goryachaya liniya – Telekom, 608.

Downloads

Published

2019-03-20

How to Cite

Blintsov, O., Burunina, Z., & Voitasyk, A. (2019). Improvement of the inverse dynamics method for high-precision control of nonlinear objects under conditions of uncertainty. Eastern-European Journal of Enterprise Technologies, 2(2 (98), 55–62. https://doi.org/10.15587/1729-4061.2019.160345

Issue

Vol. 2 No. 2 (98) (2019): Information technology. Industry control systems

Section

Industry control systems

License

Copyright (c) 2019 Oleksandr Blintsov, Zhanna Burunina, Andrii Voitasyk

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.