Computer simulation methods of redundant measurements with the nonlinear transformation function
DOI:
https://doi.org/10.15587/1729-4061.2019.160830Keywords:
redundant methods, measurement equations, function parameters, accuracy improvement, self-control, photodiodeAbstract
The studies of possibilities of methods of redundant measurements have found the high efficiency of the presented methods for increasing the accuracy of measurements. It is proved that the equation of redundant measurements ensures the independence of the measurement result of the parameters of the transformation function and their deviations from the nominal values. The possibility of obtaining an equation of redundant measurements of the parameters of the transformation functionis also proved, which will enable the implementation of metrological self-control. Experimental studies have confirmed that the accuracy of measurement is increased by processing the results of intermediate measurements by the equation of redundant measurements. In the proposed equation, due to the subtraction operation, the additive component of the error is excluded, and the multiplicative component is excluded due to the division operation. This leads to the stability of the result of measurement by the redundant method to changes in the parameters of the transformation function. In particular, it is found that the change of the parameters of the transformation function by (1÷10) % does not affect the result of redundant measurements, that is, the relative error in the given operating range will be δ1=(0.04÷0.01) %. This allows us to assert that the mathematical model underlying the presented method is consistent with the results of computer simulation. The latter, in particular, relates to the comparative analysis of the methods of redundant and non-redundant measurements for the stability to changes in the parameters of the transformation function. It is shown that the methods of redundant measurements provide the automatic exclusion of the systematic error component due to the change in the parameters of the transformation function. This is ensured by eliminating the influence of the absolute values of the parameters of the nonlinear transformation function of the photodetector and their deviations from the nominal valueson the measurement result.
There are grounds to argue about the promising development of methods of redundant measurements with various types of transformation functions of the sensor in accuracy improvement. This result is achieved by processing the results of intermediate measurements in accordance with the equation of redundant measurements. In addition, if necessary, the proposed methods allow the implementation of metrological self-controlReferences
- Shcherban’, V. Yu., Melnyk, G. V., Sholudko, M. I., Kalashnyk, V. Yu. (2018). Warp yarn tension during fabric formation. Fibres and Textiles, 2, 97–104. Available at: http://vat.ft.tul.cz/2018/2/VaT_2018_2_16.pdf
- Chaban, V. (2013). Influence of plastic deformation warp thread on basic physical and mechanical data warp-knitting fabrics. Fibres and Textiles, 1, 9–13. Available at: http://vat.ft.tul.cz/Archive/VaT_2013_1.pdf
- Shcherban’, V. Yu., Melnyk, G. V., Sholudko, M. I., Kolysko, O. Z., Kalashnyk, V. Yu. (2018). Yarn tension while knitting textile fabric. Fibres and Textiles, 3, 74–83. Available at: http://vat.ft.tul.cz/2018/3/VaT_2018_3_12.pdf
- Genkina, R. I., Lukashov, Yu. E., Malikova, H. O., Skovorodnikov, V. A., Osoka, I. V. (2010). Govorim VNIIMS, podrazumevaem – zakonodatel'naya metrologiya! Zakonodatel'naya i prikladnaya metrologiya, 5, 8–15.
- Orozco, L. (2011). Optimizing Precision Photodiode Sensor Circuit Design. Analog devices. Available at: https://www.analog.com/en/technical-articles/optimizing-precision-photodiode-sensor-circuit-design.html
- Imer, A. G., Tombak, A., Korkut, A. (2016). Electrical and photoelectrical characteristic investigation of a new generation photodiode based on bromothymol blue dye. Journal of Physics: Conference Series, 707, 012012. doi: https://doi.org/10.1088/1742-6596/707/1/012012
- Munoz Zurita, A. L., Campos, J., Ferrero, A., Pons, A. (2012). Photodiodes as Optical Radiation Measurement Standards. Photodiodes – From Fundamentals to Applications. doi: https://doi.org/10.5772/51462
- Sengupta, M. (2013). Accuracy of Photodiode Pyranometers for Photovoltaic Applications. Fourth Conference on Weather, Climate, and the New Energy Economy. Available at: https://ams.confex.com/ams/93Annual/webprogram/Paper222639.html
- Bragynets, I. O., Kononenko, O. G., Masjurenko, Yu. О. (2016). Investigation high sensitive photo detector device based on the avalanche photodiode for optoelectronic measuring systems. Tekhnichna elektrodynamika, 6, 69–75. doi: https://doi.org/10.15407/techned2016.06.069
- Su, Z., Liang, X. (2011). Computation and analysis on the Volt-Ampere characteristics of photodiode sensor under the certain conditions. 2011 4th International Congress on Image and Signal Processing. doi: https://doi.org/10.1109/cisp.2011.6100750
- Deyasi, A., Ganguly, A., Rakshit, P. C. (2015). Calculating frequency response and photocurrent density of p-i-n photodiode. Proceedings of National conference on frontline research in computer, communication and device, 119–123. Available at: https://books.google.com.ua/books?id=Pw19CwAAQBAJ&pg=PA123&lpg=PA123&dq=conference+characteristics+of+photodiode+sensor&source=bl&ots=iqTXP8NJL8&sig=ACfU3U1a1-P4MxMB_WmXDjrJ8jMNQk7ppg&hl=uk&sa=X&ved
- Pronin, A. N., Sapozhnikova, K. V., Taimanov, R. E. (2015). Reliability of measurement information in control systems. Problems and solutions. T-Comm: Telecommunications and transport, 9 (3), 32–37.
- Kondratov, V. T., Riabov, O. P. (2003). Pat. No. 73426 UA. Pyrometer for measuring temperature by spectral ratio. No. 20031212097; declareted: 12.23.2003; published: 15.07.2005, Bul. No. 7, 5. Available at: http://uapatents.com/5-73426-pirometr-spektralnogo-vidnoshennya.html
- Kondratov, V. T., Korogod, A. A. (2017). Redundant pyrometry: the condition and development prospects. Vymiriuvalna ta obchysliuvalna tekhnika v tekhnolohichnykh protsesakh, 2, 37–46. Available at: http://fetronics.ho.com.ua/pdf/pdf_full/2017/vottp-2017-2.pdf
- Kondratov, V. T. (2009). Novaya era razvitiya teorii metrologicheskoy nadezhnosti – funkciya raspredeleniya Kondratova – Veybulla, ee raznovidnosti, svoystva i funkcional'nye vozmozhnosti. Zakonodatel'naya i prikladnaya metrologiya, 2, 21–22.
- Kondratov, V. T., Zarnitsyna, H. O. (2005). Pat. No. 77840 UA. Digital pyrometer for measuring temperature by spectral ratio. No. а200501402; declareted: 15.02.2005; published: 15.01.2007, Bul. No. 1, 11.
- Kanarchuk, V. E., Derkach, O. B., Chigrinec, A. D. (1985). Termometricheskaya diagnostika mashin. Kyiv: «Vyshcha shkola», 168.
- Soboleva, N. A., Melamid, A. E. (1974). Fotoelektronnye pribory. Moscow: «Vysshaya shkola», 376.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2019 Volodymyr Shcherban, Ganna Korogod, Vitaliy Chaban, Oksana Kolysko, Yury Shcherban’, Ganna Shchutska
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.