The features of formation the loads in the device drive for ejection the coke cake

Authors

  • Виктор Иванович Рындяев Украинская инженерно-педагогической академия ул. Университетская, 16, г. Харьков, Украина, 61003, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.1657

Keywords:

Coke pie, ejecting a device, model

Abstract

The model of forming of loadings, taking into account functional connections of the system ejecting a device – coke pie, is developed. Conformities to law of forming of effort of extrusion of coke pie are analyses at transients

Author Biography

Виктор Иванович Рындяев, Украинская инженерно-педагогической академия ул. Университетская, 16, г. Харьков, Украина, 61003

Кандидат технических наук, старший преподаватель

Кафедра химической технологии неорганических веществ

References

  1. Скиданов, Ю.П. Модернизация привода ворошителя муки / Ю.П. Скиданов, В.А. Онищенко, В.И. Рындяев, А.И. Посторонко // Восточно-европейский журнал передовых технологий. — 2009. — №5/6 (41). — С.25-27.
  2. Непомнящий, И.Л. Коксовые машины, их конструкции и расчеты / И.Л. Непомнящий. — М.: Металлургиздат, 1963. — 388 с.
  3. Проектные материалы КБ Коксохиммаша.
  4. Рындяев, В.И.Основные направления в создании трансмиссий приводов механизмов передвижения коксовыталкиватилей / В.И. Рындяев, В.С. Шелехов // Восточно-европейский журнал передовых технологий. — 2010. — №4/6 (46). — С.4—6.

Downloads

How to Cite

Рындяев, В. И. (2012). The features of formation the loads in the device drive for ejection the coke cake. Eastern-European Journal of Enterprise Technologies, 3(8(51), 42–44. https://doi.org/10.15587/1729-4061.2011.1657

Issue

Vol. 3 No. 8(51) (2011): Energy saving technologies and equipment

Section

Energy-saving technologies and equipment

License

Copyright (c) 2014 Виктор Иванович Рындяев

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.