Development of a distributed wireless Wi-Fi system for monitoring the technical condition of remote objects

Authors

DOI:

https://doi.org/10.15587/1729-4061.2020.212301

Keywords:

wireless communication, remote monitoring, gyroscope, accelerometer, magnetometer, distance sensor, server

Abstract

The research addresses the issues of collection and transmission of measurement data when monitoring various construction objects and bridge structures. The issues were resolved by developing a distributed system using Wi-Fi technologies. The results of measurements of the following parameters and data were obtained: the distance between cracks and joints, magnetometer readings and location and possible inclination of objects in three axes according to accelerometer and gyroscope data. By configuring the server, new channels are created for receiving data, which allow their subsequent processing and complete analysis of the study, for example, to solve the problem of predicting the technical conditions of construction and bridge objects. The completeness of the analysis of the study solves the problem of identifying and detecting possible errors and determining delays in the communication system. In general, the validity of all research results plays an important role in predicting the technical conditions of various objects and in finding solutions to problems arising from the technical difficulties of remote control. In this regard, the issue of the validity of the choice of Wi-Fi modules, which take into account the parameters of power consumption and availability of the boards of these modules for programming in order to obtain results of measurements in a long time has been posed and resolved. Setting power consumption parameters made it possible to increase the research time at remote sites, which in turn increases the durability and life of the control system. The simplicity of programming the module boards and support of various electronic sensors allow varying the scope and research objects, thereby expanding the geography of the subject area of research. Therefore, the developed distributed system is easily adapted to the necessary problem areas of research, the monitoring results of which can be used in many areas, such as agriculture, ecology, power, health care, meteorology and others

Author Biographies

Nurbol Kaliaskarov, M. Kozybayev North Kazakhstan University Pushkin str., 86, Petropavlovsk, Kazakhstan, 150000

Post graduate student

Department of Energetic and Radioelectronics

Viktor Ivel, M. Kozybayev North Kazakhstan University Pushkin str., 86, Petropavlovsk, Kazakhstan, 150000

Doctor of Technical Sciences, Professor

Department of Energetic and Radioelectronics

Yulia Gerasimova, M. Kozybayev North Kazakhstan University Pushkin str., 86, Petropavlovsk, Kazakhstan, 150000

PhD, Associate Professor

Department of Energetic and Radioelectronics

Vyacheslav Yugay, Karaganda Technical University N. Nazarbayev ave., 56, Karaganda, Kazakhstan, 100000

PhD, Head of Department

Department of Technology of Communication Systems

Sayat Moldakhmetov, M. Kozybayev North Kazakhstan University Pushkin str., 86, Petropavlovsk, Kazakhstan, 150000

Senior Lecturer

Department of Energetic and Radioelectronics

References

  1. Park, Dzh., Makkey, S. (2006). Sbor dannyh v sistemah kontrolya i upravleniya. Prakticheskoe rukovodstvo. Moscow: OOO "Gruppa IDT", 504. Available at: https://www.studmed.ru/park-dzh-makkey-s-sbor-dannyh-v-sistemah-kontrolya-i-upravleniya-prakticheskoe-rukovodstvo_faab5c7fbdc.html
  2. Pyavchenko, O. N. (2011). The distributed systems of collection and information processing of sensors of dynamic objects. Izvestiya Yuzhnogo federal'nogo universiteta. Tehnicheskie nauki, 5 (118), 8–14. Available at: https://cyberleninka.ru/article/n/raspredelennye-sistemy-sbora-i-obrabotki-informatsii-datchikov-dinamicheskih-obektov
  3. Burns, B. (2018). Designing Distributed Systems: Patterns and Paradigms for Scalable, Reliable Services. O'Reilly Media, 166. Available at: https://www.amazon.com/Designing-Distributed-Systems-Patterns-Paradigms/dp/1491983647
  4. Wortmann, F., Flüchter, K. (2015). Internet of Things. Business & Information Systems Engineering, 57 (3), 221–224. doi: https://doi.org/10.1007/s12599-015-0383-3
  5. Atzori, L., Iera, A., Morabito, G. (2010). The Internet of Things: A survey. Computer Networks, 54 (15), 2787–2805. doi: https://doi.org/10.1016/j.comnet.2010.05.010
  6. Xia, F., Yang, L. T., Wang, L., Vinel, A. (2012). Internet of Things. International Journal of Communication Systems, 25 (9), 1101–1102. doi: https://doi.org/10.1002/dac.2417
  7. Ha, D., Park, H., Choi, S., Kim, Y. (2013). A Wireless MEMS-Based Inclinometer Sensor Node for Structural Health Monitoring. Sensors, 13 (12), 16090–16104. doi: https://doi.org/10.3390/s131216090
  8. Ocak, M. A. (2018). Where does Arduino’s power come from?: An extended literature review. Journal of Learning and Teaching in Digital Age, 3 (1), 21–34. Available at: https://dergipark.org.tr/en/download/article-file/1175624
  9. Faugel, H., Bobkov, V. (2013). Open source hard- and software: Using Arduino boards to keep old hardware running. Fusion Engineering and Design, 88 (6-8), 1276–1279. doi: https://doi.org/10.1016/j.fusengdes.2012.12.005
  10. Khoa, T. A., Man, M. M., Nguyen, T.-Y., Nguyen, V., Nam, N. H. (2019). Smart Agriculture Using IoT Multi-Sensors: A Novel Watering Management System. Journal of Sensor and Actuator Networks, 8 (3), 45. doi: https://doi.org/10.3390/jsan8030045
  11. Kumar, S., Ch, N. (2020). IoT Based Multi-sensor Data Acquisition System for the Application of Smart Agriculture. Communications in Computer and Information Science, 329–342. doi: https://doi.org/10.1007/978-981-15-3666-3_27
  12. Marques, G., Saini, J., Dutta, M., Singh, P. K., Hong, W.-C. (2020). Indoor Air Quality Monitoring Systems for Enhanced Living Environments: A Review toward Sustainable Smart Cities. Sustainability, 12 (10), 4024. doi: https://doi.org/10.3390/su12104024
  13. Holovatyy, A., Teslyuk, V., Iwaniec, M., Mashevska, M. (2017). Development of a system for monitoring vibration accelerations based on the raspberry pi microcomputer and the ADXL345 accelerometer. Eastern-European Journal of Enterprise Technologies, 6 (9 (90)), 52–62. doi: https://doi.org/10.15587/1729-4061.2017.116082
  14. Abruzzese, D., Micheletti, A., Tiero, A., Cosentino, M., Forconi, D., Grizzi, G. et. al. (2020). IoT sensors for modern structural health monitoring. A new frontier. Procedia Structural Integrity, 25, 378–385. doi: https://doi.org/10.1016/j.prostr.2020.04.043
  15. Ivel', V. P., Razinkin, V. P., Kaliaskarov, N. B. (2019). Development of wireless device monitoring of the condition of cracks and joints of buildings and structures and its advantages. The Bulletin of KazATC, 2 (109), 10–17. Available at: https://www.kazatk.kz/material/nauka/11.04.2019/%D0%B2%D0%B5%D1%80%D1%81%D1%82%D0%BA%D0%B0%20%D0%92%D0%B5%D1%81%D1%82%D0%BD%D0%B8%D0%BA%20%E2%84%96%202%20(109),%202019%20%D1%81%20%D0%BE%D0%B1%D0%BB%D0%BE%D0%B6%D0%BA%D0%BE%D0%B9%20%D0%B8%20%D0%B2%D1%8B%D1%85%D0%BE%D0%B4%D0%BD%D1%8B%D0%BC%D0%B8%20%D0%B4%D0%B0%D0%BD%D0%BD%D1%8B%D0%BC%D0%B8.pdf
  16. Ivel', V. P., Gerasimova, Yu. V., Kaliaskarov, N. B. (2018). Obzor raspredelennoy besprovodnoy sistemy sbora i peredachi analogovyh dannyh. «Kozybaevskie chteniya-2018: Evraziyskiy potentsial i novye vozmozhnosti razvitiya v usloviyah global'nyh vyzovov»: materialy mezhdunarodnoy nauchno-prakticheskoy konferentsii. Vol. 2. Petropavlovsk: SKGU im. M. Kozybaeva, 243–247. Available at: http://repository.nkzu.kz/7813/

Downloads

Published

2020-10-31

How to Cite

Kaliaskarov, N., Ivel, V., Gerasimova, Y., Yugay, V., & Moldakhmetov, S. (2020). Development of a distributed wireless Wi-Fi system for monitoring the technical condition of remote objects. Eastern-European Journal of Enterprise Technologies, 5(9 (107), 36–48. https://doi.org/10.15587/1729-4061.2020.212301

Issue

Vol. 5 No. 9 (107) (2020): Information and controlling system

Section

Information and controlling system

License

Copyright (c) 2020 Nurbol Kaliaskarov, Viktor Ivel, Yulia Gerasimova, Vyacheslav Yugay, Sayat Moldakhmetov

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.