Anticorrosive protection of structures in robust design

Authors

DOI:

https://doi.org/10.15587/1729-4061.2020.214821

Keywords:

metal structures, durability, robust design, anticorrosive protection, corrosion resistance

Abstract

The study suggests a method for determining the characteristic and desired values of corrosion resistance indicators to estimate the reliability parameters of systems of anticorrosive protection of structures (SAPS). The approach is based on developing robust (resistant to external influences) systems for designing measures of primary and secondary protection of metal structures against corrosion. Technological methods of diagnostics and maintenance are substantiated to improve the ways of using the constructions at all stages of their life cycle. Stronger corrosion resistance, that is, resistance to aggressive operating environments, is provided by effective methods of primary and secondary protection of metal structures from corrosion. The design is aimed at developing the provisions of the current standards of EN 1990 on the SAPS. It is established that the proposed requirements are aimed at ensuring the quality of metal structures and are achieved through calculations by the method of limit state design (LSD) using reliability coefficients (EN 1991). Robustness and durability are ensured in accordance with the provisions of EN 1993. The characteristic values of the quality indicators of protective coatings (EN ISO 12944, EN 1461) and structural material (EN 1993-1-4) are used. However, the procedures mean that such operating conditions are limited as for estimating the durability.

The proposed technique will improve the measures for anticorrosive protection of structures based on the robust design. The implementation of the method justifies the design and technological preparation of work to extend the durability of the structures. Effective procedures of primary and secondary protection have been introduced, and the requirements of the ISO 9001 international standards have been implemented

Author Biographies

Oleksandr Gibalenko, Pryazovskyi State Technical University Universitetska str., 7, Mariupol, Ukraine, 87555

Doctor of Technical Sciences, Associate Professor

Department of Architecture

Victoriia Gibalenko, Pryazovskyi State Technical University Universitetska str., 7, Mariupol, Ukraine, 87555

PhD, Associate Professor

Department of Architecture

Olena Bocharova, Pryazovskyi State Technical University Universitetska str., 7, Mariupol, Ukraine, 87555

Senior Lecturer

Department of Architecture

References

  1. Al-Sherrawi, M. H., Lyashenko, V., Edaan, E. M., Sotnik, S. (2018). Corrosion of Metal Construction Structures. International Journal of Civil Engineering and Technology, 9 (6), 437–446.
  2. Cai, Y., Zhao, Y., Ma, X., Zhou, K., Chen, Y. (2018). Influence of environmental factors on atmospheric corrosion in dynamic environment. Corrosion Science, 137, 163–175. doi: https://doi.org/10.1016/j.corsci.2018.03.042
  3. Talbot, D. E. J., Talbot, J. D. R. (2018). Corrosion science and technology. CRC Press, 596. doi: https://doi.org/10.1201/9781351259910
  4. Ealey, L. A. (1994). Quality by Design: Taguchi Methods and U.S. Industry. ASI Press and Irwin Professional Publishing.
  5. ISO 9001:2015. Quality management systems – Requirements. Available at: https://www.iso.org/standard/62085.html
  6. Korolov, V., Filatov, Y., Magunova, N., Korolov, P. (2013). Management of the Quality of Corrosion Protection of Structural Steel Based on Corrosion Risk Level. Journal of Materials Science and Engineering B, 3 (11). doi: https://doi.org/10.17265/2161-6221/2013.11.008
  7. Soares, C. G., Garbatov, Y., Zayed, A., Wang, G. (2009). Influence of environmental factors on corrosion of ship structures in marine atmosphere. Corrosion Science, 51 (9), 2014–2026. doi: https://doi.org/10.1016/j.corsci.2009.05.028
  8. Gibalenko, О. (2015). Monitoring of residual resource steel in corrosive environments. Academic journal. Industrial Machine Building, Civil Engineering, 3 (45), 110–116.
  9. Korolov, V. P., Vysotsky, Y., Gibalenko, O. M., Korolov, P. V. (2010). Estimation of steel structure corrosion risk level. Eurocorr-2010. The European Corrosion Congress. From the Earth`s Depths to Space Heights. Moscow, 534.
  10. Gibalenko, A. N., Korolov, V., Filatov, J. (2014). Design requirements to structural steel durability based on level of industrial facility corrosion hazard. Proceedings of the II Polish-Ukrainian International Conference Aktualnie problemy konstrukcji metalowych (APMK). Gdansk, 98–102.
  11. Akao, Y. (1991). Hoshin Kanri: Policy Deployment for Successful TQM. Productivity press.
  12. Witcher, B. J. (2014). Hoshin Kanri. Perspectives on Performance, 11 (1), 16–24.
  13. Hoshin Kanri: Policy Deployment for Successful TQM by Yoji Akao (2004-10-12) (1758).
  14. Ćwiklicki, M., Obora, H. (2011). Hoshin Kanri: policy management in Japanese subsidiaries based in Poland. Business, Management and Education, 9 (2), 216–235. doi: https://doi.org/10.3846/bme.2011.15
  15. New York: American Institute for Steel Classification (2002). American Rust Standard Guide, 1, 12.
  16. Korolov, V. P., Ryzhenkov, O. A., Korolov, P. V. (2019). Osoblyvosti rehuliuvannia protykoroziynoho zakhystu metalokonstruktsiy promyslovykh obiektiv. Promyslove budivnytstvo ta inzhenerni sporudy, 3, 18–24.

Downloads

Published

2020-10-31

How to Cite

Gibalenko, O., Gibalenko, V., & Bocharova, O. (2020). Anticorrosive protection of structures in robust design. Eastern-European Journal of Enterprise Technologies, 5(12 (107), 66–72. https://doi.org/10.15587/1729-4061.2020.214821

Issue

Vol. 5 No. 12 (107) (2020): Materials Science

Section

Materials Science

License

Copyright (c) 2020 Oleksandr Gibalenko, Victoriia Gibalenko, Olena Bocharova

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.