Analytical study of auto-balancing within the framework of the flat model of a rotor and an auto-balancer with a single cargo
DOI:
https://doi.org/10.15587/1729-4061.2021.227583Keywords:
passive auto-balancer, rotor, automatic balancing, static balancing, motion stability, static imbalanceAbstract
This paper reports the analytically established conditions for the onset of auto-balancing for the case of a flat rotor model on isotropic elastic-viscous supports and an auto-balancer with a single load. The rotor is statically unbalanced, the rotation axis is vertical. The auto-balancer has a single cargo – a pendulum, a ball, or a roller. The balancing capacity of the cargo is equal to the rotor imbalance.
The physical-mathematical model of the system is described. The differential equations of motion are recorded in dimensionless form relative to the coordinate system that rotates synchronously with the rotor. The so-called main movement has been found; in it, the cargo synchronously rotates with the rotor and balances it. The differential equations of motion are linearized in the neighborhood of the main movement. A characteristic equation has been constructed. It helped investigate the stability of the main movement (an auto-balancing mode) for the cases of the absence and presence of resistance forces in the system.
It was established that in the absence of resistance forces in the system:
– the rotor has three characteristic rotational speeds, and the first always coincides with the resonance frequency;
– auto-balancing occurs when the rotor rotates at speeds between the first and second ones, and above the third characteristic speed;
– the value of the second and third characteristic speeds is significantly influenced by the ratio of weight to the mass of the system;
– the second and third characteristic speeds monotonously increase with an increase in the ratio of cargo weight to the mass of the system.
Resistance forces significantly affect both the values of the second and third characteristic speeds and the conditions of their existence. Small resistance forces do not change the quality behavior of the system. With high resistance forces, the number of characteristic speeds decreases to one.
The paper reports the results applicable to an auto-balancer with many cargoes when it balances the imbalance that equals the balancing capacity of the auto-balancer
References
- Thearle, E. L. (1950). Automatic dynamic balancers (Part 2 – Ring, pendulum, ball balancers). Machine Design, 22 (10), 103–106.
- Muyzhniek, A. I. (1959). Nekotorye voprosy teorii avtomaticheskoy dinamicheskoy balansirovki. Voprosy dinamiki i prochnosti, 6, 123–145.
- Blehman, I. I. (1981). Sinhronizatsiya v prirode i tehnike. Moscow: Nauka, 352.
- Detinko, F. M. (1956). Ob ustoychivosti raboty avtobalansira dlya dinamicheskoy balansirovki. Izv. AN SSSR. OTN. Mehanika i mashinostroenie, 4, 38–45.
- Artyunin, A. I. (1993). Issledovanie dvizheniya rotora s avtobalansirom. Izvestiya vysshih uchebnyh zavedeniy. Mashinostroenie, 1, 15–19.
- Sommerfeld, A. (1904). Beitrage zum dinamischen Ausbay der Festigkeislehre. Zeitschriff des Vereins Deutsher Jngeniere, 48 (18), 631–636.
- Filimonikhin, G. (1996). K ustoychivosti osnovnogo dvizheniya dvuhmayatnikovogo avtobalansira. Dopovidi Natsionalnoi akademiyi nauk Ukrainy, 8, 74–78. Available at: http://dspace.kntu.kr.ua/jspui/handle/123456789/6796
- Green, K., Champneys, A. R., Lieven, N. J. (2006). Bifurcation analysis of an automatic dynamic balancing mechanism for eccentric rotors. Journal of Sound and Vibration, 291 (3-5), 861–881. doi: https://doi.org/10.1016/j.jsv.2005.06.042
- Bogdevicius, M., Janutėnienė, J. (2010). Influence of Dynamic Viscosity on Automatic Dynamic Balance. Solid State Phenomena, 164, 127–132. doi: https://doi.org/10.4028/www.scientific.net/ssp.164.127
- Artyunin, A. I., Eliseyev, S. V. (2013). Effect of “Crawling” and Peculiarities of Motion of a Rotor with Pendular Self-Balancers. Applied Mechanics and Materials, 373-375, 38–42. doi: https://doi.org/10.4028/www.scientific.net/amm.373-375.38
- Lu, C.-J., Tien, M.-H. (2012). Pure-rotary periodic motions of a planar two-ball auto-balancer system. Mechanical Systems and Signal Processing, 32, 251–268. doi: https://doi.org/10.1016/j.ymssp.2012.06.001
- Gorbenko, A. N. (2003). On the Stability of Self-Balancing of a Rotor with the Help of Balls. Strength of Materials, 35, 305–312. doi: http://doi.org/10.1023/a:1024621023821
- Filimonikhin, G. (2004). Zrivnovazhennia i vibrozakhyst rotoriv avtobalansyramy z tverdymy koryhuvalnymy vantazhamy. Kirovohrad: KNTU, 352.
- Artyunin, A. I., Barsukov, S. V., Sumenkov, O. Y. (2019). Peculiarities of Motion of Pendulum on Mechanical System Engine Rotating Shaft. Proceedings of the 5th International Conference on Industrial Engineering (ICIE 2019), 649–657. doi: https://doi.org/10.1007/978-3-030-22041-9_70
- Filimonikhin, G., Yatsun, V., Filimonikhina, I., Ienina, I., Munshtukov, I. (2019). Studying the load jam modes within the framework of a flat model of the rotor with an autobalancer. Eastern-European Journal of Enterprise Technologies, 5 (7 (101)), 51–61. doi: https://doi.org/10.15587/1729-4061.2019.177418
- Strauch, D. (2009). Classical Mechanics: An Introduction. Springer-Verlag Berlin Heidelberg, 405. doi: https://doi.org/10.1007/978-3-540-73616-5
- Ruelle, D. (1989). Elements of Differentiable Dynamics and Bifurcation Theory. Academic Press. doi: https://doi.org/10.1016/c2013-0-11426-2
- Nayfeh, A. H. (1993). Introduction to Perturbation Techniques. John Wiley & Sons, Inc., 533.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Геннадий Борисович Филимонихин, Любовь Сергеевна Олийниченко, Guntis Strautmanis, Антонина Петровна Галеева, Василий Анатольевич Грубань, Александр Владимирович Лисенко, Mareks Mezitis, Иван Анатольевич Валявский
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
