Characteristics investigation of composite electrochromic films based on Ni(Oh)2, polyvinyl alcohol, and polyvinylpyrrolidone

Authors

DOI:

https://doi.org/10.15587/1729-4061.2022.259329

Keywords:

electrochromism, nickel hydroxide, polyvinyl alcohol, polyvinylpyrrolidone, optical characteristics, electrochemical impedance spectroscopy

Abstract

The cost of electrochromic “smart” windows ranges from 200–800 USD/m2. The high cost is determined by the small volume of production and the high cost of vacuum methods for applying device layers. The development of other methods could lead to lower costs and further mass use of “smart” windows.

The paper presents the work on improving the electrochemical method of deposition of electrochromic films based on Ni(OH)2. Composite electrochromic films were deposited from Ni(NO3)2 solutions with the addition of water-soluble polymers – polyvinyl alcohol (PVA), polyvinylpyrrolidone (PVP), and mixtures thereof. Two PVA grades and one PVP grade were used in the experiments. As a result, six films were obtained from solutions of different compositions and concentrations of polymers.

An investigation of the optical properties of the films in the initial state showed that there is no intense absorption of light in the entire visible spectrum and the transmission corresponds to a glass substrate. Thus, the formed electrochromic films will not produce tints and visible light absorption in the finished electrochromic element.

The electrochemical and electrochromic characteristics of the films differed significantly depending on the amount and specific polymers used. The film obtained from a solution containing PVA grade 24-99 was the most electrochemically active, while the best electrochromic characteristics were in the film deposited from a solution of a mixture of PVP grade 24-99 and PVP. Moreover, the films obtained in solutions containing separately PVA grade 24-99 and PVP had worse electrochromic characteristics, and the electrochemical characteristics were the same or worse relative to the film obtained in a mixture of polymers.

The results of the method of electrochemical impedance spectroscopy showed compliance with the found electrochromic and electrochemical characteristics of the formed films.

Author Biographies

Valerii Kotok, Ukrainian State University of Chemical Technology

PhD, Associate Professor

Department of Processes, Apparatus and General Chemical Technology

Vadym Kovalenko, Ukrainian State University of Chemical Technology

PhD, Associate Professor

Department of Analytical Chemistry and Chemical Technology of Food Additives and Cosmetics

Miroslav Mikolasek, Slovak University of Technology

PhD, Associate Professor

Institute of Electronics and Photonics

Peter Ondrejka, Slovak University of Technology

PhD Student

Institute of Electronics and Photonics

Oleksandra Zima, Ukrainian State University of Chemical Technology

PhD Student

Department of Analytical Chemistry and Chemical Technology of Food Additives and Cosmetics

Inna Anataichuk, Ukrainian State University of Chemical Technology

Senior Lecturer

Department of International Cooperation

Dmitriy Vodopyan, Ukrainian State University of Chemical Technology

Department of Natural and Synthetic Polymers, Fats and Food Products

Kostyantyn Sukhyy, Ukrainian State University of Chemical Technology

Doctor of Technical Sciences, Professor

Department of Plastics and Photo-, Nano- and Polygraphic Materials Processing

References

  1. Kumaravel, S., Karthick, K., Sankar, S. S., Karmakar, A., Madhu, R., Bera, K., Kundu, S. (2021). Current progressions in transition metal based hydroxides as bi-functional catalysts towards electrocatalytic total water splitting. Sustainable Energy & Fuels, 5 (24), 6215–6268. doi: https://doi.org/10.1039/d1se01193f
  2. Gautam, R. K., Singh, A. K., Tiwari, I. (2022). Nanoscale layered double hydroxide modified hybrid nanomaterials for wastewater treatment: A review. Journal of Molecular Liquids, 350, 118505. doi: https://doi.org/10.1016/j.molliq.2022.118505
  3. Lee, H., Hong, A., Kwak, J., Lee, S. (2022). Synthesis of UV/blue light-emitting aluminum hydroxide with oxygen vacancy and their application to electrically driven light-emitting diodes. RSC Advances, 12 (7), 4322–4328. doi: https://doi.org/10.1039/d1ra07942e
  4. Londhe, S., Patra, C. R. (2022). Biomedical applications of europium hydroxide nanorods. Nanomedicine, 17 (1), 5–8. doi: https://doi.org/10.2217/nnm-2021-0351
  5. Grobelny, Z., Jurek-Suliga, J., Golba, S. (2020). Application of cesium hydroxide monohydrate for ring opening polymerization of monosubstituted oxiranes: characterization of synthesized polyether-diols. Polymer Bulletin, 78 (12), 7301–7312. doi: https://doi.org/10.1007/s00289-020-03480-1
  6. Hall, D. S., Lockwood, D. J., Bock, C., MacDougall, B. R. (2015). Nickel hydroxides and related materials: a review of their structures, synthesis and properties. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 471 (2174), 20140792. doi: https://doi.org/10.1098/rspa.2014.0792
  7. Bertuol, D. A., Bernardes, A. M., Tenório, J. A. S. (2009). Spent NiMH batteries – The role of selective precipitation in the recovery of valuable metals. Journal of Power Sources, 193 (2), 914–923. doi: https://doi.org/10.1016/j.jpowsour.2009.05.014
  8. Kovalenko, V. L., Kotok, V. A., Sykchin, A., Ananchenko, B. A., Chernyad’ev, A. V., Burkov, A. A. et. al. (2020). Al3+ Additive in the Nickel Hydroxide Obtained by High-Temperature Two-Step Synthesis: Activator or Poisoner for Chemical Power Source Application? Journal of The Electrochemical Society, 167 (10), 100530. doi: https://doi.org/10.1149/1945-7111/ab9a2a
  9. Trotochaud, L., Young, S. L., Ranney, J. K., Boettcher, S. W. (2014). Nickel–Iron Oxyhydroxide Oxygen-Evolution Electrocatalysts: The Role of Intentional and Incidental Iron Incorporation. Journal of the American Chemical Society, 136 (18), 6744–6753. doi: https://doi.org/10.1021/ja502379c
  10. Djafri, D. E., Henni, A., Zerrouki, D. (2022). Electrochemical synthesis of highly stable and rapid switching electrochromic Ni(OH)2 nanoflake array films as low-cost method. Materials Chemistry and Physics, 279, 125704. doi: https://doi.org/10.1016/j.matchemphys.2022.125704
  11. Kotok, V., Kovalenko, V. (2017). The electrochemical cathodic template synthesis of nickel hydroxide thin films for electrochromic devices: role of temperature. Eastern-European Journal of Enterprise Technologies, 2 (11 (86)), 28–34. doi: https://doi.org/10.15587/1729-4061.2017.97371
  12. Wang, W., Li, Z., Yu, Z., Su, G. (2021). The stabilization of Ni(OH)2 by In2O3 rods and the electrochromic performance of Ni(OH)2/In2O3-rod composite porous film. Thin Solid Films, 734, 138839. doi: https://doi.org/10.1016/j.tsf.2021.138839
  13. Zhao, F., He, H., Cheng, Z., Tang, Y., Li, G., Xu, G. et. al. (2022). Improving electrochromic performance of porous nickel oxide electrode via Cu doping. Electrochimica Acta, 417, 140332. doi: https://doi.org/10.1016/j.electacta.2022.140332
  14. Parmar, K. H., Manjunath, V., Bimli, S., Chikate, P. R., Patil, R. A., Ma, Y.-R., Devan, R. S. (2022). Stable and reversible electrochromic behaviors in anodic NiO thin films. Chinese Journal of Physics, 77, 143–150. doi: https://doi.org/10.1016/j.cjph.2022.02.014
  15. Kotok, V. A., Malyshev, V. V., Solovov, V. A., Kovalenko, V. L. (2017). Soft Electrochemical Etching of FTO-Coated Glass for Use in Ni(OH)2-Based Electrochromic Devices. ECS Journal of Solid State Science and Technology, 6 (12), P772–P777. doi: https://doi.org/10.1149/2.0071712jss
  16. Kotok, V., Kovalenko, V., Anataichuk, I., Mochalov, A., Makarchenko, N., Nafeev, R., Verbitskiy, V. (2020). Effect of variable temperature loads on characteristics of electrochrome composite Ni (OH)2-PVA films. Eastern-European Journal of Enterprise Technologies, 6 (5 (108)), 6–14. doi: https://doi.org/10.15587/1729-4061.2020.220302
  17. Tan, S., Gao, L., Wang, W., Gu, X., Hou, J., Su, G. (2022). Preparation and black-white electrochromic performance of the non-contact ZnO@NiO core-shell rod array. Surfaces and Interfaces, 30, 101889. doi: https://doi.org/10.1016/j.surfin.2022.101889
  18. Bo, G., Wang, X., Wang, K., Gao, R., Dong, B., Cao, L., Su, G. (2017). Preparation and electrochromic performance of NiO/TiO2 nanorod composite film. Journal of Alloys and Compounds, 728, 878–886. doi: https://doi.org/10.1016/j.jallcom.2017.08.247
  19. Wang, X., Liu, B., Tang, J., Dai, G., Dong, B., Cao, L. et. al. (2019). Preparation of Ni(OH)2/TiO2 porous film with novel structure and electrochromic property. Solar Energy Materials and Solar Cells, 191, 108–116. doi: https://doi.org/10.1016/j.solmat.2018.11.005
  20. Kotok, V. A., Kovalenko, V. L., Kovalenko, P. V., Solovov, V. A., Deabate, S., Mehdi, A. et. al. (2017). Advanced electrochromic Ni(OH)2/PVA films formed by electrochemical template synthesis. ARPN Journal of Engineering and Applied Sciences, 12 (13), 3962–3977. Available at: http://www.arpnjournals.org/jeas/research_papers/rp_2017/jeas_0717_6156.pdf
  21. Kotok, V., Kovalenko, V. (2020). Influence of used polyvinyl alcohol grade on the electrochromic properties of Ni(OH)2-PVA composite films. Eastern-European Journal of Enterprise Technologies, 5 (6 (107)), 58–65. doi: https://doi.org/10.15587/1729-4061.2020.214239
  22. Kovalenko, V., Kotok, V., Zima, O., Nafeev, R., Verbitskiy, V., Melnyk, O. (2022). Definition of the role of polyvinyl alcohol during formation and in the structure of cathodic synthesized composite electrochromic nickel hydroxide layer: template or surfactant. Eastern-European Journal of Enterprise Technologies, 2 (12 (116)), 6–14. doi: https://doi.org/10.15587/1729-4061.2022.255482
  23. Kotok, V., Kovalenko, V. (2020). A study of the influence of polyvinyl pyrrolidone concentration in the deposition electrolyte on the properties of electrochromic Ni(OH)2 films. Eastern-European Journal of Enterprise Technologies, 4 (6 (106)), 31–37. doi: https://doi.org/10.15587/1729-4061.2020.210857
  24. Kotok, V. A., Kovalenko, V. L., Zima, A. S., Kirillova, E. A. Burkov, A. A., Kobylinska, N. G. et. al. (2019). Optimization of electrolyte composition for the cathodic template deposition of Ni(OH)2-based electrochromic films on FTO glass. ARPN Journal of Engineering and Applied Sciences, 14 (2), 344–353. Available at: http://www.arpnjournals.org/jeas/research_papers/rp_2019/jeas_0119_7562.pdf
  25. Mortimer, R. J., Sialvi, M. Z., Varley, T. S., Wilcox, G. D. (2014). An in situ colorimetric measurement study of electrochromism in the thin-film nickel hydroxide/oxyhydroxide system. Journal of Solid State Electrochemistry, 18 (12), 3359–3367. doi: https://doi.org/10.1007/s10008-014-2618-5
  26. Kotok, V., Kovalenko, V., Nafeev, R., Verbitskiy, V., Melnyk, O., Plaksiienko, I. et. al. (2021). A study of physico-chemical characteristics of electrochromic Ni(OH)2-PVA films on fto glass with different deposition duration. Eastern-European Journal of Enterprise Technologies, 5 (12 (113)), 39–46. doi: https://doi.org/10.15587/1729-4061.2021.242853
  27. Kotok, V., Kovalenko, V. (2019). Optimization of the deposition conditions for Ni(OH)2 films for electrochromic elements of “smart” windows. Eastern-European Journal of Enterprise Technologies, 2 (5 (98)), 35–40. doi: https://doi.org/10.15587/1729-4061.2019.162572
  28. Inamdar, A. I., Sonavane, A. C., Pawar, S. M., Kim, Y., Kim, J. H., Patil, P. S. et. al. (2011). Electrochromic and electrochemical properties of amorphous porous nickel hydroxide thin films. Applied Surface Science, 257 (22), 9606–9611. doi: https://doi.org/10.1016/j.apsusc.2011.06.079
  29. Shi, J., Lai, L., Zhang, P., Li, H., Qin, Y., Gao, Y. et. al. (2016). Aluminum doped nickel oxide thin film with improved electrochromic performance from layered double hydroxides precursor in situ pyrolytic route. Journal of Solid State Chemistry, 241, 1–8. doi: https://doi.org/10.1016/j.jssc.2016.05.032
  30. Li, Z., Yu, Z., Wang, W., Hou, J., Gao, L., Gu, X., Su, G. (2021). Nickel oxide film with tertiary hierarchical porous structure and high electrochromic performance and stability. Materials Chemistry and Physics, 269, 124738. doi: https://doi.org/10.1016/j.matchemphys.2021.124738
  31. Bakhoum, D. T., Oyedotun, K. O., Sarr, S., Sylla, N. F., Maphiri, V. M., Ndiaye, N. M. et. al. (2022). A study of porous carbon structures derived from composite of cross-linked polymers and reduced graphene oxide for supercapacitor applications. Journal of Energy Storage, 51, 104476. doi: https://doi.org/10.1016/j.est.2022.104476
  32. Liu, Y., Wang, N., Wang, X., Huang, W. (2021). PVA/PVP crosslinked blend membranes for pervaporation dehydration of 2-methyltetrahydrofuran solution. Xiandai Huagong/Modern Chemical Industry, 41 (2), 183–187. doi: https://doi.org/10.16606/j.cnki.issn0253-4320.2021.02.035
  33. Huang, C., Jiang, G., Advincula, R. (2008). Electrochemical Cross-Linking and Patterning of Nanostructured Polyelectrolyte−Carbazole Precursor Ultrathin Films. Macromolecules, 41 (13), 4661–4670. doi: https://doi.org/10.1021/ma800268n

Downloads

Published

2022-06-30

How to Cite

Kotok, V., Kovalenko, V., Mikolasek, M., Ondrejka, P., Zima, O., Anataichuk, I., Vodopyan, D., & Sukhyy, K. (2022). Characteristics investigation of composite electrochromic films based on Ni(Oh)2, polyvinyl alcohol, and polyvinylpyrrolidone. Eastern-European Journal of Enterprise Technologies, 3(6(117), 58–65. https://doi.org/10.15587/1729-4061.2022.259329

Issue

Section

Technology organic and inorganic substances