Rational modes of round grinding of tough-to-machine materials
DOI:
https://doi.org/10.15587/1729-4061.2010.2760Keywords:
cutting condition, cylindrical grinding, hard-to-machining materials.Abstract
The article presents the cutting condition of cylindrical grinding of hard-to-machining materials tailored to the criteria of manifestation of the adsorption-plasticizing effect. The processing hard-to-machining materials different groups in these cutting condition provide improved performance, guaranteed lack of grinding defects and the formation of the hardened layer.References
- Бобров В.Ф. Основы теории резания металлов. М., «Машиностроение», 1975. – 334 с., ил.
- Грановский Г.И., Грановский В.Г. Резание металлов: Учебник для машиностроительных и приборостроительных спец. вузов. - М.: Высш. шк., 1985. – 304 с., ил.
- Ребиндер П.А. Поверхностные явления в дисперсионных системах: Избр. тр. // Физико-химическая механика. – М.: Наука, 1979. – 381 с.
- Спицин В.И., Троицкий О.А. Электропластическая деформация металлов. – М.: Наука. — 1985. – 160 с.
- Зуев Л.Б. Электрические поля и пластичность кристаллов // Соросовский образовательный журнал. – № 9, 1998. – С. 92–95.
- Головин Ю.М. Магнитопластичность твердых тел (Обзор) // ФТТ. – 2004. – Т. 46. – Вып. 5. – С. 769 – 803.
- Щукин Е.Д. Понижение поверхностной энергии и изменение механических свойств твердых тел под влиянием окружающей среды // Физ.-хим. механика материалов. – 1976. – № 1. – С. 3–20.
- Сурду Н.В. Адсорбционное влияние сред при шлифовании // Пробл. машиностроения. – Харьков, 1999. – Т. 2. – №1-2. – с.106–113.
- Режимы резания труднообрабатываемых материалов: Справочник / Гуревич Я.Л., Горохов М.В., Захаров В.И. и др. 2-е изд., перераб. и доп. – М.: Машиностроение, 1986. − 240 с., ил.
- Справочник шлифовщика / Кожуро Л.М., Панов А.А., Ремизовский Э.И., Чистосердов П.С.; Под общ. ред. Чистосердова П.С. – Мн.: Высш. школа, 1981.– 287 с., ил.
- Прогрессивные режущие инструменты и режимы резания. Справочник / Баранников В.И., Жариков А.В., Юдина Н.Д. и др.; Под общ. ред. Баранникова В.И. – М.: Машиностроение, 1990. – 400 с., ил.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Н.В. Сурду, А.В. Телегин
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
