The research of nonlinear system stability for steam temperature control of primary steam

Authors

  • Богдана Вікторівна Фоменко Кафедра автоматизації теплоенергетичних процесів Національний технічний університет України «Київський політехнічний інститут», Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2010.3371

Keywords:

control system of the overheated steam temperature, output constraints, stability

Abstract

In the article the new nonlinear scheme of control system of the overheated steam temperature for the straight-through boiler has been proposed. The research of the nonlinear system for stability with a variation of the additional settings has been presented.

Author Biography

Богдана Вікторівна Фоменко, Кафедра автоматизації теплоенергетичних процесів Національний технічний університет України «Київський політехнічний інститут»

Асистент

References

  1. Bogdana V. Fomenko. Steam Temperature Automatic Control System with Nonlinear Components/Bogdana V. Fomenko, Dmytriy R. Kornienko// Preprints of scientific Section of 13 International Student Olympiad on Automatic Control, Saint-Petersburg, 2010, P. 170-172.
  2. Фоменко Б.В.Учет ограничений на выходную переменную в системе регулирования температуры перегрева пара/ Б.В. Фоменко, Д.Р. Корниенко//Восточно-Европейский журнал передовых технологий №3/4 (39), 2009, С. 21-24.
  3. Ковриго Ю.М. Врахування обмежень для підвищення якості функціонування систем регулювання енергоблоків ТЕС і АЕС/ Ю.М. Ковриго, Б.В. Фоменко// Автоматика. Автоматизация. Электротехнические комплексы и системы.
  4. Glattfelder A.H. Control systems with input and output constraints / Glattfelder A.H., Shaufelberger W. – London.: Springer, 2003. – 499 p.

Downloads

Published

2010-11-10

How to Cite

Фоменко, Б. В. (2010). The research of nonlinear system stability for steam temperature control of primary steam. Eastern-European Journal of Enterprise Technologies, 6(7(48), 64–66. https://doi.org/10.15587/1729-4061.2010.3371

Issue

Vol. 6 No. 7(48) (2010): Energy saving technologies and equipment

Section

Energy-saving technologies and equipment

License

Copyright (c) 2014 Богдана Вікторівна Фоменко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.