The features of formation of crystal structure defects of electrodeposited metals

Authors

  • Олег Борисович Гирин Ukrainian State University of Chemical Technology Prospekt Gagarina, 8, Dnipropetrovsk, Ukraine 49005, Ukraine https://orcid.org/0000-0001-7712-2290
  • Илья Моисеевич Ковенский Tyumen State Oil and Gas University Volodarskogo Str., 38, Tyumen, 625000, Russian Federation, Russian Federation

DOI:

https://doi.org/10.15587/1729-4061.2012.3731

Keywords:

Defect, crystalline structure, electrodeposited metal

Abstract

The formation in electrodeposited metals of highly defective crystalline structure corresponding metals hardened from the liquid state is detected. The regular changes in the characteristics of the defects of metals crystalline structure with an increase of overcooling degree during their electrodeposition are set

Author Biographies

Олег Борисович Гирин, Ukrainian State University of Chemical Technology Prospekt Gagarina, 8, Dnipropetrovsk, Ukraine 49005

Doctor of Science (Engineering), Professor, Vice-Rector of Science, Head of the Department

Department of Materials Science

Илья Моисеевич Ковенский, Tyumen State Oil and Gas University Volodarskogo Str., 38, Tyumen, 625000, Russian Federation

Doctor of Science (Engineering), Professor, Director of Scientific and Research Institute of Reliability and Safety of Materials and Constructions, Head of the Department

Department of Materials Science and Technology of Construction Materials

References

  1. Girin, O. B. Phenomenon of Precipitation of Metal Being Electrodeposited, Occurring via Formation of an Undercooled Liquid Metal Phase and its Subsequent Solidification. Part 1. Experimental Detection and Theoretical Grounding [Text] / O. B. Girin // Materials Development and Processing. – Weinheim : WILEY-VCH, 2000. – V. 8. – P. 183–188.
  2. Girin, O. B. Phenomenon of Precipitation of Metal Being Electrodeposited, Occurring via Formation of an Undercooled Liquid Metal Phase and its Subsequent Solidification. Part 2. Experimental Verification [Text] / O. B. Girin // Materials Development and Processing. – Weinheim : WILEY-VCH, 2000. – V. 8. – P. 189–194.
  3. Girin, O. B. Phase and Structure Formation of Metallic Materials Electrodeposited via a Liquid State Stage: New Experimental Proof [Text] / O. B. Girin // Defect and Diffusion Forum. – 2010. – Vol. 303-304. – P. 99–105.
  4. Girin, O. B. Formation of the Deposits of Metals being Electrodeposited under the Influence of a Centrifugal Force [Text] / O. B. Girin // The Advanced Science Journal. – 2011. – № 4. – P. 51-58.
  5. Girin, O. B. Change of Density and Surface Morphology of Metals being Electrodeposited under the Action of a Centrifugal Force [Text] / O. B. Girin // The Advanced Science Journal. – 2011. – № 3. – P. 11-16.
  6. Мирошниченко, И. С. Закалка из жидкого состояния [Текст] : монография / И. С. Мирошниченко. – М. : Металлургия, 1982. – 168 с.
  7. Herlach, D. M. Metastable Solids from Undercooled Melts [Text] / D. M. Herlach, P. K. Galenko, D. Holland-Moritz. – Oxford : Elsevier, 2007. – 432 p.
  8. Новиков, И. И. Дефекты кристаллического строения металлов [Текст] : учебное пособие / И. И. Новиков. – М. : Металлургия, 1975. – 208 с.
  9. Избранные методы исследования в металловедении [Текст] / под ред. Г.-Й. Хунгера ; пер. с нем. А. К. Белявского. – М. : Металлургия, 1985. – 490 с.
  10. Girin, O. B. Nonconventional X-ray Diffraction Techniques for Coating Characterization [Text] / O. B. Girin // Solidification 1998. – Warrendale : The Minerals, Metals & Materials Society, 1998. – P.161-169.
  11. Ковенский, И. М. Металловедение покрытий [Текст] : учебник для вузов / И. М. Ковенский, В. В. Поветкин. – М. : СП Интермет Инжиниринг, 1999. – 296 с.
  12. Поветкин, В. В. Структура электролитических покрытий [Текст] : монография / В. В. Поветкин, И. М. Ковенский. – М. : Металлургия, 1989. – 136 с.

Downloads

Published

2012-04-01

How to Cite

Гирин, О. Б., & Ковенский, И. М. (2012). The features of formation of crystal structure defects of electrodeposited metals. Eastern-European Journal of Enterprise Technologies, 2(5(56), 44–47. https://doi.org/10.15587/1729-4061.2012.3731

Issue

Vol. 2 No. 5(56) (2012): Applied physics

Section

Applied physics

License

Copyright (c) 2014 Олег Борисович Гирин, Илья Моисеевич Ковенский

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.