Definition of rational parameters of layered coatings for restoration of worn parts
DOI:
https://doi.org/10.15587/1729-4061.2012.3938Keywords:
Parts restoration, vector optimization, resourceAbstract
Using the methods of vector optimization the rational parameters of a layered coating recovery are defined. Optimization was performed for the three-layer coating on the performance cost of materials and resources (life) restored partsReferences
- Артемчук В.В. Моделювання зносу багатошарового покриття. Міжнародний науковий журнал «Проблеми трибології». №2, 2011. - С. 59-65
- Артемчук В.В. Побудова математичної моделі зносу з уточненими параметрами. Міжнародний науковий журнал "Проблеми трибології". № 4, 2011. - С. 121-131
- Артемчук В.В. Теоретичні аспекти моделювання зносу багатошарових покриттів. Вісник Дніпропетровського національного університету залізничного транспорту імені академіка В. Лазаряна. - Дніпропетровськ, Україна, 2011 / Випуск 40. - С. 37-45
- Нагин В.Д. Принятие решений в многокритериальной среде: количественный подход. – М.: ФИЗМАТЛИТ, 2002. – 144 с.
- Босов А.А. Функции множества и их применение. Монография. – Дніпродзержинськ: «Андрій», 2007. – 182 с.
- Корн Г., Корн Т. Справочник по математике для научных работников и инженеров. – М.: «Наука», 1977. – 831 с.
- Газотермические покрытия из порошковых материалов / Ю.С. Борисов, Ю.А. Харламов, С.Л. Сидоренко, Е.И. Ардатовская / Справ. -К.: Наукова думка, 1987. - 544 с.
- Ткаченко Ю.Г. Износостойкие твердосплавные покрытия / Ткаченко Ю.Г., Сычев В.В., Апининская Л.М., Каневская Ц.А., Шаривкер С.Ю., Астахов Е.А., Гарда А.П. // Порошковая металлургия. – 1975. № 7. С. 45-48.
- Куницкий Ю.А., Коржик В.Н., Борисов Ю.С. Некристаллические металлические материалы и покрытия в технике. –Тєхника.,К., 1988 – 198 с
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Віктор Васильович Артемчук
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
