The features of laser forming of sheet materials

Authors

  • Олексій Дмитрович Кагляк National technical university of Ukraine “Kiev polytechnic institute” Victory av. 37, Kiev, Ukraine, 03056, Ukraine
  • Олексій Олександрович Гончарук National technical university of Ukraine “Kiev polytechnic institute” Victory av. 37, Kiev, Ukraine, 03056, Ukraine
  • Леонід Федорович Головко National technical university of Ukraine “Kiev polytechnic institute” Victory av. 37, Kiev, Ukraine, 03056, Ukraine
  • Анатолій Миколайович Лутай National technical university of Ukraine “Kiev polytechnic institute” Victory av. 37, Kiev, Ukraine, 03056, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.3944

Keywords:

Laser forming, sheet materials, deformation

Abstract

The mechanisms of laser forming are analyzed. The results of experimental researches are presented. The recommendations for the treatment of carbon steel 65G and stainless steel 12Kh18N10T are presented

Author Biographies

Олексій Дмитрович Кагляк, National technical university of Ukraine “Kiev polytechnic institute” Victory av. 37, Kiev, Ukraine, 03056

Laser technique and physic-technology science department

Олексій Олександрович Гончарук, National technical university of Ukraine “Kiev polytechnic institute” Victory av. 37, Kiev, Ukraine, 03056

Laser technique and physic-technology science department

Леонід Федорович Головко, National technical university of Ukraine “Kiev polytechnic institute” Victory av. 37, Kiev, Ukraine, 03056

Laser technique and physic-technology science department

Анатолій Миколайович Лутай, National technical university of Ukraine “Kiev polytechnic institute” Victory av. 37, Kiev, Ukraine, 03056

Laser technique and physic-technology science department

References

  1. Yau, C.L. A new analytical model for laser bending. / C.L. Yau, K.C. Chan, W.B. Lee. // Laser Assisted Net Shape Engineering 2, Proceedings of the LANE’97, Vol. 2, 1997, pp. 357–366.
  2. Vollertsen, F. Model for the temperature gradient mechanism of laser bending / F. Vollertsen, M. Rodle. // Proceedings of the LANE’94, Vol. 1, 1994, pp. 371–378.
  3. Hu, Z. Computer simulation and experimental investigation of sheet metal bending using laser beam scanning. / Z. Hu, M. Labudovic, H. Wang. // International Journal of Machine Tools and Manufacture 41 (2001), рр. 589–607.
  4. Chen, J. Modelling of Simultaneous Transformations in Steels. / J. Chen. // PhD thesis. – Department of Materials Science and Metallurgy Univesity of Cambridge England February, 2009
  5. Кагляк, О.Д. Лазерне формоутворення просторових металевих конструкцій / О.Д. Кагляк, Л.Ф. Головко, О.О. Гончарук // Восточно-европейский журнал передовых технологий. – 2009. – № 6/1(42). – С. 4-11.

Downloads

Published

2012-04-01

How to Cite

Кагляк, О. Д., Гончарук, О. О., Головко, Л. Ф., & Лутай, А. М. (2012). The features of laser forming of sheet materials. Eastern-European Journal of Enterprise Technologies, 2(13(56), 32–40. https://doi.org/10.15587/1729-4061.2012.3944

Issue

Vol. 2 No. 13(56) (2012): Materials technology

Section

Materials Science

License

Copyright (c) 2014 Олексій Дмитрович Кагляк, Олексій Олександрович Гончарук, Леонід Федорович Головко, Анатолій Миколайович Лутай

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.