Distinctive features of analysis of reliability of overhead distribution networks with sources of distributed generation

Authors

  • Владимир Андреевич Попов National Technical University of Ukraine «Kyiv Polytechnic Institute» Peremogy Avenue, 37, Kyiv, Ukraine, 03056, Ukraine
  • Вадим Владиславович Ткаченко National Technical University of Ukraine «Kyiv Polytechnic Institute» Peremogy Avenue, 37, Kyiv, Ukraine, 03056, Ukraine https://orcid.org/0000-0002-4528-7661
  • Сахрагард Саид Банузаде National Technical University of Ukraine «Kyiv Polytechnic Institute» Peremogy Avenue, 37, Kyiv, Ukraine, 03056, Ukraine
  • Андрей Александрович Журавлев National Technical University of Ukraine «Kyiv Polytechnic Institute» Peremogy Avenue, 37, Kyiv, Ukraine, 03056, Ukraine https://orcid.org/0000-0002-5158-446X

DOI:

https://doi.org/10.15587/1729-4061.2015.42477

Keywords:

overhead distribution networks, distributed generation, power supply reliability, switching and protective devices

Abstract

The authors have shown that the existing reliability management experience abroad because of the topology specifics, switching devices, relay protection and automation tools used is not fully applicable to domestic distribution networks. In this regard, new modeling and optimization methodology of power supply reliability parameters, oriented also at the appearance possibility of distributed generation sources in the structure of electric networks was proposed. The paper presents the results of a comparative analysis of the application conditions of distributed generation tools with different equipment of electrical networks by automatic and non-automatic switching devices, in order to substantiate optimal connection zones of generating sources under different application conditions. Recommendations for setting relay protection tools under the joint use of reclosers and fuses in the networks with distributed generation sources to eliminate false alarms and unwarranted disconnection of fuses at transient faults were developed. It is shown that under the valuation of reliability indicators, cost estimate of measures on providing electricity networks with required switching and protective devices serves as private objective function during multicriterion substantiation of optimal integration options of distributed generation into electric networks.

Author Biographies

Владимир Андреевич Попов, National Technical University of Ukraine «Kyiv Polytechnic Institute» Peremogy Avenue, 37, Kyiv, Ukraine, 03056

Candidate of technical science, Associate Professor

Department of electricity supply

Вадим Владиславович Ткаченко, National Technical University of Ukraine «Kyiv Polytechnic Institute» Peremogy Avenue, 37, Kyiv, Ukraine, 03056

Candidate of technical science, Senior Lecturer

Department of electricity supply

Сахрагард Саид Банузаде, National Technical University of Ukraine «Kyiv Polytechnic Institute» Peremogy Avenue, 37, Kyiv, Ukraine, 03056

Graduate

Department of electricity supply

Андрей Александрович Журавлев, National Technical University of Ukraine «Kyiv Polytechnic Institute» Peremogy Avenue, 37, Kyiv, Ukraine, 03056

Assistant

Department of electricity supply

References

  1. IEEE Std 1366-2012 (2012). IEEE Guide for Electric Power Distribution Reliability Indices. The IEEE Inc., USA, 43.
  2. Popov, V. A., Tkachenko, V. V., Manoilo, Yu. D. (2010). Questions of estimation the reliability of overhead lines 6, 10 kV in energy systems of Ukraine. Promelektro, 5, 25–32.
  3. NERC of Ukraine (2014). On approval of indexes of the electric power supply quality in 2014. NERC of Ukraine resolution # 476 of 17/04/2014.
  4. Zharkyn, A. F., Popov, V. A., Tkachenko, V. V. (2013). Solution of the problem of optimal partitioning overhead distribution networks in terms of normalization of reliability indexes. Technical electrodynamics, Kyiv, IED NASU, 5, 61–69.
  5. Sean, F. Ch. (2012). Distributed generation and methods of reliability evaluation. I International scientific-practical conference "Engineering – the foundation of modern innovation system", Yoshkar-Ola, at 2 pm., Part 2, 15–17.
  6. Antikainen, J., Repo, S., Verho, P., Jarventausta, P. (2009). Possibilities to Improve Reliability of Distribution Network by Intended Island Operation. International Journal of Innovations in Energy Systems and Power, 4 (1), 22–28.
  7. Bat-Undral, B. (2009). Improving the reliability of electric power supply to consumers when using distributed generation. Methodical questions of the reliability of large-scale power systems research. Methodical and practical problems of reliability of liberalized energy systems, 59, 338–343.
  8. Voropai, N. I. (2005). Distributed generation in power systems. International scientific-practical conference "Malaya Energetika 2005", Moscow.
  9. Kyrylenko, O. V., Pavlovskyi, V. V., Lukianenko, L. M. (2011). Technical aspects of distributed of generation sources implementation in power networks. Technical electrodynamics, 1, 46–53.
  10. Zharkin, A. F., Popov, V. A., Tkachenko, V. V., Banuzade Sakhrahard S. (2013). Functional equivalenting power networks in estimation the impact of distributed generation sources in their modes. Electronic modeling, 3 (35), 99–111.
  11. Vorotnitskii, V., Buzin, S. (2005). Recloser – a new level of overhead lines 6 (10) kV automation and control. Electrical Engineering News, 3 (33). Available at: http://www .news.elteh.ru/arh/2005/33/11.php
  12. Javadian, S. A. M., Massaeli, M. (2011). Impact of distributed generation on distribution system’s reliability considering recloser-fuse miscoordination - A practical case study. Indian Journal of Science and Technology, 4 (10), 1279–1284.
  13. Walling, R. A., Miller, N. W. (2002). Distributed Generation Impact on Distribution Systems. Final Report of GE Power Systems Energy Consulting, General Electric International Inc., USA, 56.
  14. Martínez-Velasco, J. A., Martín-Arnedo, J., Castro-Aranda, F. (2010). Modeling protective devices for distribution systems with distributed generation using an EMTP-type tool. Ingeniare. Revista chilena de ingeniería, 18 (2), 258–273. doi: 10.4067/s0718-33052010000200013
  15. Ortmeyer, T., Dugan, R., Crudele, D., Key, T., Barker, P. (2008). Renewable Systems Interconnection Study: Utility Models, Analysis, and Simulation Tools. Report of Sandia National Laboratories, USA, 77.
  16. Coster, E., Myrzik, J., Kling, W. (2007). Effect of Distributed Generation on Protection of Medium Voltage Cable Grids. CIRED 19th International Conference on Electricity Distribution. Vienna, 4.
  17. Basso, T. S. (2009). System Impacts from Interconnection of Distributed Resources: Current Status and Identification of Needs for Further Development. Technical Report NREL/TP-550-44727. National Renewable Energy Laboratory, USA, 44.

Published

2015-06-29

How to Cite

Попов, В. А., Ткаченко, В. В., Банузаде, С. С., & Журавлев, А. А. (2015). Distinctive features of analysis of reliability of overhead distribution networks with sources of distributed generation. Eastern-European Journal of Enterprise Technologies, 3(8(75), 26–32. https://doi.org/10.15587/1729-4061.2015.42477

Issue

Section

Energy-saving technologies and equipment