Application of the interferometric approach for the optical tomography of stationary torch
DOI:
https://doi.org/10.15587/1729-4061.2015.47156Keywords:
speckle-interferometry, optically-dense flame, refractive index, temperature distribution, optical tomographyAbstract
Knowledge on the internal structure of the flame is very important for the study and optimization of the combustion processes. The direct flame probing involves great difficulties because of the usually aggressive nature of the environment studied and due to inevitable perturbation of combustion processes by probing devices. Efficient alternatives are supplied by non-contact optical methods in which the flame structure can be recovered via the spatial distribution of the radiation passed through the flame. In this situation, the phase distribution of the transmitted radiation is especially informative, in particular, for an optically dense (not fully transparent to its own radiation) flame. The paper describes a speckle-interferometry technique for registration of the probe radiation phase and related approaches to extracting information on the spatial inhomogeneity of the torch. Application of the high-speed single-frame measurement techniques and special handling tomographic procedures enable to determine the spatial and temporal distribution of the refractive index in the combustion zone on which basis it is possible to identify the structure of the flame. As an example, results of a study of the stationary combustion of the medical paraffin droplets are presented. The data obtained can be used for increase of the combustion efficiency and reduction of fuel consumption.References
- Trofimenko, M. Yu., Trofimenko, M. Y., Aslanov, S. K., Smolyar, V. P. (2014, May). Electrical structure of the jet of a gas mixture flame. Surface Engineering and Applied Electrochemistry, Vol. 50, № 3, 275–279. doi:10.3103/s1068375514030089
- Trofimenko, M. Yu., Aslanov, S. K., Smolyar, V. P. (2014). Structural changes in the gas flame upon the pulsating combustion mode onset. Ukrainian Journal of Physics, Vol. 59, № 4, 359–364.
- Svet, Ya. D. (1982). Opticheskie metody izmerenia istinnyh temperatur. М.: Nauka, 296.
- Trofimenko, M. Yu. (1995). Issledovanie gorenia tverdyh smesevyh system opticheskimi metodami. 21-y Mezhdunarodnyi pirotehnicheskiy seminar (Moscow, Russia, 11-15 Septenber 1995), 884–890.
- Thorne, A. P. (1988). Spectrophysics. London/N.Y.: Chapman and Hall, 390. doi:10.1007/978-94-009-1193-2
- Ostrovskaya, G. V. (2008). Holographic diagnostics of the plasma. Journ. Tech. Phys., Vol. 78, № 9, 1–28.
- Florko, A. V., Shevchuk, V. G. (2006). Spektral’nye metody issledovania vysokotemperaturnyh sistem. Odessa: ONU, 146.
- Francon, M.; Ostrovskiy, Yu. I. (1980). Optika speklov. Translation from French. M.: Mir, 171.
- Løkberg, O. J. (1987). Electronic speckle pattern interferometry. Optical Metrology. Springer Netherlands, 542–572. doi:10.1007/978-94-009-3609-6_36
- Yang, L., Ettemeyer, A. (2003). Strain measurement by three-dimensional electronic speckle pattern interferometry: potentials, limitations, and applications. Optical Engineering, Vol. 42, № 5, 1257–1266. doi:10.1117/1.1566781
- Tyrer, J. R. (1997). Electronic speckle pattern interferometry. Optical measurement methods in biomechanics. Springer US, 99–124. doi:10.1007/978-0-585-35228-2_6
- Popov, A. Yu., Tyurin, A. V., Bekshaev, A. Ya., Gotsulsky, V. Ya.; assignee: Odessa I. I. Mechnikov National University. (25.02.2014). Sposib shvydkisnoho vymiriuvannia zminy fazy obyektnoi hvyli metodom fazomoduliovanoi spekl-interferometrii. Patent of Ukraine № 105297. Appl. № а2012 15004. Filed 27.12.2012. Bul. № 4, 4.
- Warnatz, J., Maas, U., Dibble, R. W. (2001). Combustion: Physical and Chemical Fundamentals, Modeling and Simulation, Experiments, Pollutant Formation. Springer, 351.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2015 Андрей Юрьевич Попов, Александр Валентинович Тюрин, Владимир Григорьевич Ткаченко, Александр Янович Бекшаев, Валерий Владимирович Калинчак, Михаил Юрьевич Трофименко
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.