Quality criteria of mixing multi-component system
DOI:
https://doi.org/10.15587/1729-4061.2012.5544Keywords:
Technology co-extrusion, mixing index, gravimetric dosing, multi-component mixture, mixing qualityAbstract
Modern coextruded production requires new approaches to technology, this is largely due to the wide nomenclature of raw materials, a combination of their application (recipes, multilayer structures) and a wide range of finished products.
One of the key modules coextrusion line is gravimetric dosing. Moreover, performance measures dosing systems are not available, but practice shows that the stability of the recipe is the first play technological parameter affecting the underlying trading performance of the performance, cost, and quality.
The analysis of the quality criteria for the example of mixing technology coextrusion. The effect of mixing on the quality of physical and mechanical properties of multilayer film products. Defined standard value index characterizes the qualitative mixing multicomponent mixture. Investigated and analyzed the samples for the development of unit testing procedures gravimetric dosing systems multicomponent mixtures
References
- Ульшин В.А., Леваничев В.В., Терещенко Т.М., Леваничев А.В. Экспериментальные исследование влияния качества смешения на характеристики готового изделия, Вестник СНУ им. Даля №9 (180). - Луганск, 2012. с. 194-198.
- Ким В.С., Скачков В.В. Диспергирование и смешение в процессах производства переработки пластмасс. – М.: Химия, 1988. – 240с.
- Торнер Р.В. Акутин М.С. Оборудование заводов по переработки пластмасс. М.: Химия, 1986. – 400с.
- Техника переработки пластмасс/ под ред. Н.И. Басова и В. Броя – М. Химия, 1985г. 528с.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Віталій Олександрович Ульшин, Віталій Валерійович Леванічев, Тетяна Михайлівна Терещенко, Артем Віталійович Леванічев
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
