QUALITY MANAGEMENT IN THE PROJECTS OF RADIATION RESISTANT COMPOSITE MATERIALS AND COATINGS CREATION

Authors

  • Татьяна Анатольевна Фарионова Admiral Makarov National University of Shipbuilding Heroi Stalingrada Ave, 9, of.22, Mykolaiv, Ukraine, 54025, Ukraine
  • Юлия Алексеевна Казимиренко Admiral Makarov National University of Shipbuilding Heroi Stalingrada Ave, 9, of.226, Mykolaiv, Ukraine, 54025, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2013.6600

Keywords:

quality control management, radiation resistant composite materials, coatings

Abstract

The design of modern radiation resistant materials and coatings is a complex multi criteria task. To solve it, together with some other important elements is to develop mechanisms of these materials quality control. This article grounds the necessity of systematic approach for comprehensive assessment quality factor of modern radiation resistant composite materials and coatings. The article suggests the methods of comprehensive quality factor calculation at the  early stages of new radiation resistant compositions, based on “material-property-material” statistic system behavior. The authors developed a cognitive model as a mechanism of designed materials quality control taking into account the dynamic of reciprocal action of both prescribed and technological system factors. The use of cognitive approach allows to significantly improve completeness, accuracy and adequacy of quality control management.

Author Biographies

Татьяна Анатольевна Фарионова, Admiral Makarov National University of Shipbuilding Heroi Stalingrada Ave, 9, of.22, Mykolaiv, Ukraine, 54025

Candidate of Technical Sciences, Associate Professor

Department of automated software

 

Юлия Алексеевна Казимиренко, Admiral Makarov National University of Shipbuilding Heroi Stalingrada Ave, 9, of.226, Mykolaiv, Ukraine, 54025

Candidate of Technical Sciences, Associate Professor

Department of Engineering and Metal Studies Dept

References

  1. Стандарт ДСТУ ISO 9001-2001 «Системи управління якістю. Вимоги» [Электронный ресурс] // Київ, 2001. – 25 с. – Режим доступа: http://nads.gov.ua/control/uk/publish/article?art_id=53745&cat_id=53688. (20.11.2012). – Название с экрана.
  2. Фарионова, Т. А. Выбор состава композиционных материалов и покрытий технических средств для перевозки опасных грузов на основе экспертных оценок [Электронный ресурс] / Т. А. Фарионова, Ю. А. Казимиренко // «Вісник Національного університету кораблебудування». – Миколаїв : НУК, 2010. − № 5. – Режим доступа: http: // ev.nuos.edu.ua (20.11.2012). – Название с экрана.
  3. Фарионова, Т. А. Когнитивное моделирование в проектировании композиционных материалов и конструкций [Текст] / Т. А. Фарионова, Ю. А. Казимиренко // Восточно-Европейский журнал передовых технологий. – Харьков, 2011 № 1/6 (49). – С. 36-39.
  4. Королев, Е.В. Методики и алгоритмы синтеза радиационно-защитных материалов нового поколения [Учебное пособие] / Е.В. Королев [и др.]. – Пенза: ПГУФС, 2009. – 130 с.

Downloads

Published

2013-02-10

How to Cite

Фарионова, Т. А., & Казимиренко, Ю. А. (2013). QUALITY MANAGEMENT IN THE PROJECTS OF RADIATION RESISTANT COMPOSITE MATERIALS AND COATINGS CREATION. Eastern-European Journal of Enterprise Technologies, 1(10(61), 177–179. https://doi.org/10.15587/1729-4061.2013.6600

Issue

Vol. 1 No. 10(61) (2013): Integrated strategic management, project management and software development companies and territories

Section

Integrated strategic management, project management and software development companies and territorial

License

Copyright (c) 2014 Татьяна Анатольевна Фарионова, Юлия Алексеевна Казимиренко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.