Vol. 3 No. 1 (111) (2021): Engineering technological systems

Engineering technological systems

• Devising manufacturing techniques to control the process of zonal segregation in large steel ingots

  Anatolij Narivskij, Abdi Nuradinov, Ibrahim Nuradinov

  6-13

  • PDF

• Determining the width of a layer cut with saws with multidirectional teeth

  Oleksandr Okhrimenko, Vyacheslav Vovk, Serhii Maidaniuk, Yuliia Lashyna

  14-20

  • PDF

• Identifying changes in the technical parameters of milking rubber under industrial conditions to elucidate their effect on the milking process

  Andriy Paliy, Elchyn Aliiev, Alexander Nanka, Oleksiy Bogomolov, Vadim Bredixin, Anatoliy Paliy, Oksana Shkromada, Yurii Musiienko, Aleksandr Stockiy, Natalia Grebenik

  21-29

  • PDF

• Comprehensive assessment of the influence of structural friction in a vehicle suspension on its performance

  Valeriy Pisarev

  29-36

  • PDF

• Development of alternative steering models for ev bus: a preliminary study on the conversion of hydraulic to electric power steering

  Nazaruddin Nazaruddin, Danardono A Sumarsono, Mohammad Adhitya, Ghany Heryana, Rolan Siregar, Sonki Prasetya, Fuad Zainuri

  37-46

  • PDF

• Development of product complexity index in 3D models using a hybrid feature recognition method with rule-based and graph-based methods

  Hendri Dwi Saptioratri Budiono, Finno Ariandiyudha Hadiwardoyo

  47-61

  • PDF

• Design of an auger thermo-radiation dryer for drying plant-derived pomace

  Tetiana Herasymenko, Katerina Silchenko, Anna Hotvianska, Galyna Kyrsanova, Nina Budnyk, Alla Kainash, Lyudmila Polozhyshnikova, Iryna Taraymovich

  62-69

  • PDF

• Development of a mathematical model of vibratory non-lift movement of light seeds taking into account the aerodynamic forces and moments

  Аnton Nikiforov, Аlina Nykyforova, Roman Antoshchenkov, Vitalina Antoshchenkova, Sergey Diundik, Vladimir Mazanov

  70-78

  • PDF

• Improving the mechanical-mathematical model of grain mass separation in a fluidized bed

  Vadym Bredykhin, Petro Gurskyi, Oleksiy Alfyorov, Khrystyna Bredykhina, Andrey Pak

  79-86

  • PDF

• Analysis of the effect of stirrer and container rotation direction on mixing index (Ip)

  Sugeng Hadi Susilo, Asrori Asrori, Gumono Gumono

  86-91

  • PDF

• Devising a method to parametrize the jacket style varieties through the modification of tіpological series structures

  Alla Slavinska, Viktoriia Mytsa, Oksana Syrotenko, Oksana Dombrovska

  92-105

  • PDF