Design and research of fishing tools with rational parameters of magnetic systems

Authors

DOI:

https://doi.org/10.15587/1729-4061.2017.108822

Keywords:

fishing tool, magnetic system, permanent magnet, hoisting capacity, tractive characteristic, magnetic flux density

Abstract

One of the effective methods of cleaning wells from ferromagnetic objects is the use of magnetic fishing tools. However, the known designs have a number of drawbacks. Therefore, new designs of high-efficiency fishing tools were proposed in the work. For development of these tools, magnetic systems consisting of cylindrical magnetic cores with segmented radially magnetized permanent magnets made of rare-earth materials between them were used. According to the results of theoretical research performed using the finite element method, rational parameters of the elements of the magnetic systems, namely, the length of the permanent magnets and the height of the magnetic system were established. This has made it possible to develop systems that are characterized by a maximum utilization of the power of permanent magnets. The paper presents results of experimental research into the hoisting capacity which confirm advantage of the developed fishing tools over the known counterparts. The use of new magnetic tools will increase efficiency of cleaning wells from ferromagnetic objects of varied shapes and weight during cutting “windows” in the casing and in the process of drilling branch holes

Author Biographies

Taras Romanyshyn, Ivano-Frankivsk National Technical University of Oil and Gas Karpatska str., 15, Ivano-Frankivsk, Ukraine, 76019

PhD, Associate Professor

Department of oil and gas equipment

Andriy Dzhus, Ivano-Frankivsk National Technical University of Oil and Gas Karpatska str., 15, Ivano-Frankivsk, Ukraine, 76019

Doctor of Technical Sciences, Professor

Department of oil and gas equipment

Liubomyr Romanyshyn, Ivano-Frankivsk National Technical University of Oil and Gas Karpatska str., 15, Ivano-Frankivsk, Ukraine, 76019

PhD, Associate Professor

Department of oil and gas equipment

References

  1. Zalizniak, B. V. (2015). Efficient Cooperation of Academic and University Science. Interview with Ye. I. Kryzhanivsky, Rector of Ivano-Frankivsk National Technical University of Oil and Gas, Academician of NAS of Ukraine. Nauka ta innovacii, 11 (4), 13–17. doi: 10.15407/scin11.04.013
  2. Kotskulych, Ya. S., Kyrchei, O. I., Lazarenko, O. H., Livinskyi, A. M. (2016). Vidnovlennia sverdlovyn shliakhom zaburiuvannia novykh stovburiv. Molodyi vchenyi, 12.1 (40), 45–49. Available at: http://molodyvcheny.in.ua/files/journal/2016/12.1/12.pdf
  3. Stavychnyi, Ye. M., Piatkivskyi, S. A., Plytus, M. M., Prytula, L. Ya., Kovalchuk, M. B. (2014). Vidnovlennia sverdlovyn – perspektyvnyi napriam zbilshennia obsiahiv vydobutku vuhlevodniv u Zakhidnomu naftopromyslovomu raioni Ukrainy. Naftohazova haluz Ukrainy, 6, 3–6. Available at: http://nbuv.gov.ua/UJRN/ngu_2014_6_3
  4. Vdovychenko, A. I., Koval, A. M., Chepil, P. M. (2016). Naroshchuvannia vydobutku vuhlevodniv v Ukraini za rakhunok vidnovliuvalnykh protsesiv. Naftohazova inzheneriya, 1, 112–121. Available at: http://journals.pntu.edu.ua/index.php/oge/article/view/295/262
  5. Coll, B., Laws, G., Jenpert, J., Sportelli, M., Svoboda, C., Trimble, M. (2012). Specialized Tools for Wellbore Debris Recovery. Oilfield Review, 24 (4), 4–13. Available at: http://www.slb.com/~/media/Files/resources/oilfield_review/ors12/win12/1_specialized.pdf
  6. Minnahmetov, I. R. (2012). Analiz raboty sushchestvuyushchih tekhnologiy ochistki zaboya skvazhin ot metalla. Vestnik PNIPU. Geologiya. Neftegazovoe i gornoe delo, 3, 45–53.
  7. DeGeare, J. (2014). The Guide to Oilwell Fishing Operations: Tools, Techniques, and Rules of Thumb. Gulf Professional Publishing, 234.
  8. Douglas, J. (1999). Fishing techniques for drilling operations. In. Proc. of AAPG Southwest Section Meeting.
  9. Johnson, E., Land, J., Lee, M., Robertson, R. (2012). Landing the big one – the art of fishing. Oilfield Review, 24 (4), 26–35. Available at: http://www.slb.com/~/media/Files/resources/oilfield_review/ors12/win12/3_fish_art.pdf
  10. Ermolaev, A. M., Kobylyanskiy, M. T., Bogdanova, T. V., Kobylyanskiy, D. M. (2016). Magnitnye loviteli kak sredstvo snizheniya travmatizma pri burenyi podzemnyh skvazhin. Vestnik nauchnogo centra po bezopasnosti rabot v ugol'noy promyshlennosti, 1, 89–92.
  11. Kryzhanovskiy, E. I., Rayter, P. N., Romanishin, L. I., Romanishin, T. L. (2014). Ehksperimental'nye issledovaniya harakteristik magnitnyh sistem lovil'nyh ustroystv. Neftyanoe hozyaystvo, 7, 104–106.
  12. Kobylyanskiy, M. T. (2009). Analiz vliyaniya neblagopriyatnyh skvazhinnyh faktorov na parametry magnitnyh loviteley burovogo instrumenta. Vestnik KuzGTU, 6, 14–16.
  13. Romanyshyn, T. L. (2013). Obhruntuvannia vyboru materialiv postiynykh mahnitiv dlia lovylnykh prystroiv. Rozvidka ta rozrobka naftovykh i hazovykh rodovyshch, 1, 143–152. Available at: http://nbuv.gov.ua/UJRN/rrngr_2013_1_16
  14. Anoshkin, A. P., Muradov, A. V. (2012). Remkomplekt dlya kapital'nogo remonta skvazhin. Nedropol'zovanie XXI vek, 2 (33), 38–40.
  15. Gasanov, R. A., Amirov, R. G., Ehyvazova, Z. Z. (2009). Razrabotka novogo parametricheskogo ryada magnitnyh loviteley na osnove visokoehnergetichnyh magnitnyh zahvatnyh mekhanizmov. Neftepromyslovye delo, 10, 39–41.
  16. Gutfleisch, O. (2000). Controlling the properties of high energy density permanent magnetic materials by different processing routes. Journal of Physics D: Applied Physics, 33 (17), R157–R172. doi: 10.1088/0022-3727/33/17/201
  17. Kurnikov, Yu. A., Koncur, I. F., Kobylyanskiy, M. T., Romanishin, L. I.; Kurnikov, Yu. A. (Ed.) (1988). Magnitnye ustroystva dlya ochistki skvazhin. Lviv: Vishcha shkola, 108.

Downloads

Published

2017-08-30

How to Cite

Romanyshyn, T., Dzhus, A., & Romanyshyn, L. (2017). Design and research of fishing tools with rational parameters of magnetic systems. Eastern-European Journal of Enterprise Technologies, 4(5 (88), 17–22. https://doi.org/10.15587/1729-4061.2017.108822

Issue

Vol. 4 No. 5 (88) (2017): Applied physics

Section

Applied physics

License

Copyright (c) 2017 Taras Romanyshyn, Andriy Dzhus, Liubomyr Romanyshyn

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.