Some aspects of elastomer structure for properties of impact resistance compositions based on polydicyclopentadiene

Authors

  • Марія Миколаївна Богомолова The National Research Tomsk Polytechnic University Lenina 30, Tomsk, Tomsk district, Russia Federation, 634050, Russian Federation
  • Дмитро Іванович Земляков The National Research Tomsk Polytechnic University Lenina 30, Tomsk, Tomsk district, Russia Federation, 634050, Russian Federation
  • Роман Вікторович Аширов The National Research Tomsk Polytechnic University Lenina 30, Tomsk, Tomsk district, Russia Federation, 634050, Russian Federation
  • Володимир Володимирович Лебедєв National Technical University "Kharkiv Polytechnic Institute" Str. Frunze 21, Kharkov, Ukraine, 61002, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2013.11724

Keywords:

Polydicyclopentadiene, synthetic rubber, impact-resistant compositions

Abstract

At present, when creating new polymeric materials the metathesis polymerization with application of ruthenium catalysts of Grubbs type is has been studied. One of the polymers obtained by metathesis polymerization is a polydicyclopentadiene  - polymeric material, the advantage of which is the combination of high strength properties with chemical resistance and low density. The polydicyclopentadiene can be a part of details of various shapes and large sizes, which provides the usage of this polymer in various fields of mechanical engineering, chemical industry and construction. The article presents the results of a study of polydicyclopentadiene modified by ethylene-propylene-diene rubber and synthetic polybutadiene rubber in order to create impact-resistant composite material. It was shown that the elongation at break and tensile modulus at tension of the modified polydicyclopentadiene strongly depends on the content of ethylidenenorbornene in the ethylene-propylene-diene rubber, and the Izod impact strength is almost independent of the content of ethylidenenorbornene in ethylene-propylene-diene rubber. The synthetic polybutadiene rubber compared to ethylene-propylene-diene rubber does not increase the impact-resistance of the composition

Author Biographies

Марія Миколаївна Богомолова, The National Research Tomsk Polytechnic University Lenina 30, Tomsk, Tomsk district, Russia Federation, 634050

Graduate student

Department of Organic Chemistry and Technology of Organic Synthesis

Дмитро Іванович Земляков, The National Research Tomsk Polytechnic University Lenina 30, Tomsk, Tomsk district, Russia Federation, 634050

Graduate student

Department of Organic Chemistry and Technology of Organic Synthesis

Роман Вікторович Аширов, The National Research Tomsk Polytechnic University Lenina 30, Tomsk, Tomsk district, Russia Federation, 634050

Ph.D., Senior Research Fellow

Department of Organic Chemistry and Technology of Organic Synthesis

Володимир Володимирович Лебедєв, National Technical University "Kharkiv Polytechnic Institute" Str. Frunze 21, Kharkov, Ukraine, 61002

PhD, Associate Professor

Department of Technology of Plastics

References

  1. Патент 9.960.030 ВОЙС, МПК C08G 61/08. Polyolefin compositions having variable toughness and/or hardness [Текст] / Giardello Michael, Lasch, Jonathan, Cruce Christopher, Macleod Jessie (США). — 60/085,981; ; заявл. 19.05.1998; опубл. 25.11.1999. - 8 с.
  2. Патент 2168518 Российская Федерация, МПК C08F32/00. Состав, способный к полимеризации [Текст] / Хафнер Андреас, Ван дер Шааф Пауль Адриаан, Мюлебах Андреас (CH). — 97112372/04; заявл. 11.12.1995; опубл. 20.07.1999, Бюл. № 7. — 6 с.
  3. Патент 44368581 США, МПК C08F2/04. Plasticized polydicyclopentadiene and a method for making the same [Текст] / Klosiewicz Daniel W (США). — 19820378449; заявл. 14.05.1982; опубл. 13.03.1984. - 7 с.
  4. Ефимов, В. А. Исследование свойств полициклопентадиена различной степени сшивания [Текст] / В. А. Ефимов, А. И.Кораблев, М. Е. Соловьев, Б. С.Туров // Каучук и Резина. – 2004. - № 1. - С. 7-9.
  5. Sheng, X. The influence of cross-linking agents on ring-opening metathesis polymerized thermosets [Текст] / X. Sheng, M. R. Kessler, and J. K. Lee // Journal of Thermal Analysis and Calorimetry. – 2007. Vol. - l. 89. - No 2. - Р. 459–464.
  6. Патент 4657981 США, МПК C08G61/08. Dicyclopentadiene polymer containing elastomer [Текст] / Klosiewicz Daniel W (США). — 19860837107; заявл. 07.03.1986; опубл. 14.04.1987. - 5 с.
  7. Патент 4520181 США, МПК C08F2/00. Method for making a dicyclopentadiene thermoset polymer containig elastomer [Текст] / Klosiewicz Daniel W (США). — 19830472684; заявл. 07.03.1983; опубл. 28.05.1985. - 5 с.
  8. Yang, Y.S. Curing study of dicyclopentadiene resin and effect of elastomer on its polymer network [Текст] / Y.S.Yang, E. Lafontaine, B. Mortaigne // Polymer. – 1997. - Vol. 38. - No. 5. - Р. 1121-1130.
  9. Богомолова, М.Н. Модификация ударной вязкости полидициклопентадиена, полученного с применением рутениевого катализатора метатезиса [Текст] / М.Н. Богомолова, Р.В. Аширов, Р.В. Якимов, Н.М. Щеглова, В.К. Чайковский // 1-ая Международная Российско-Казахстанская конференция по химии и химической технологии. – Томск 2011. С. 236-237.
  10. Богомолова, М. Н. Применение деструктата синтетического бутадиенового каучука в синтезе полидициклопентадиена [Текст] / М. Н. Богомолова, Д. И. Земляков, Н.И. Сидоренко, Р.В. Аширов, Д.А. Русаков, В.К. Чайковский // Каучук и Резина. – 2012. - № 3. - С 6-8.
  11. Патент 2436801 Российская Федерация, МПК C08F4/80. Рутениевый катализатор метатезисной полимеризации дициклопентадиена (варианты) и способ получения полидициклопентадиена (варианты) [Текст] / Колесник В. Д.. Аширов Р. В., Щеглова Н. М., Якимов Р. В., Киселева Н. В., Богомолова М. Н. (Российская Федерация). — 2010121639/04; заявл. 27.05.2010; опубл. 27.05.2010, Бюл. № 10. — 4 с.
  12. Pat. WO 9.960.030 (1999), Polyolefin compositions having variable toughness and / or hardness.
  13. Pat. RF 2168518 (2001), The composition capable of polymerization.
  14. Pat. U.S. 4436858 (1984), Plasticized polydicyclopentadiene and a method for making the same.
  15. Efimov V.A., Korablev A.I., Solovyev M.E., Turov B.S. (2004) aoutchouc and rubber, 1, 7-9
  16. X. Sheng, M. R. Kessler, J. K. Lee (2007)Journal of Thermal Analysis and Calorimetry, 89, 2, 459-464.
  17. Pat. U.S. 4657981 (1987), Dicyclopentadiene polymer containing elastomer.
  18. Pat. U.S. 4520181 (1985), Method for making a dicyclopentadiene thermoset polymer containig elastomer.
  19. Yeong-Show Yang, Eric Lafontaine, Bruno Mortaigne (1997) Polymer, 38, 5, 1121-1130.
  20. M.N. Bogomolova, R.V. Ashirov, R.V. Yakimov, N.M. Shcheglov, V.K. Tchaikovsky (2011) Modification toughness рolydicyclopentadiene obtained using ruthenium catalyst metathesis. 1-sts Russian-Kazakhstan International Conference on Chemistry and Chemical Technology, 236-237.
  21. Bogomolova M.N., Zemliakov D.I., Sidorenko N.I., Ashirov R.V., Rusakov D.A., Tchaikovsky V.K. (2012) Сaoutchouc and Rubber, 3. 6-8.
  22. Pat. RF 2436801 (2011) ruthenium metathesis polymerization catalyst dicyclopentadiene (options) and the method for Polydicyclopentadiene (options).

Downloads

Published

2013-04-25

How to Cite

Богомолова, М. М., Земляков, Д. І., Аширов, Р. В., & Лебедєв, В. В. (2013). Some aspects of elastomer structure for properties of impact resistance compositions based on polydicyclopentadiene. Eastern-European Journal of Enterprise Technologies, 2(11(62), 15–18. https://doi.org/10.15587/1729-4061.2013.11724

Issue

Vol. 2 No. 11(62) (2013): Ecology

Section

Ecology

License

Copyright (c) 2014 Марія Миколаївна Богомолова, Дмитро Іванович Земляков, Роман Вікторович Аширов, Володимир Володимирович Лебедєв

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.