Development of a selfdiagnostics subsystem of the informationmeasuring system using anfis controllers
DOI:
https://doi.org/10.15587/1729-4061.2018.123591Keywords:
hydraulic transmission of diesel locomotive, information-measuring system, parameter measurement sensors, neural-fuzzy controllerAbstract
A hybrid self-diagnostic system was designed to evaluate correctness of functioning of sensors of the information-measuring system of testing hydraulic transmissions of diesel locomotives of UHP 750 type. The system features the possibility of checking certain four parameters in steady-state operation conditions using known mathematical dependencies. For the other 14 parameters (for which mathematical dependencies were not studied and which have a high complexity of calculations), 14 neural-fuzzy ANFIS networks were developed. Self-diagnostic algorithms using ANFIS controllers were elaborated. The algorithms provide prediction of individual system parameters with the help of ANFIS controllers and a further comparison of the predicted parameters with the measured parameters. The ANFIS controller structure with the proposed Sugeno rule set was constructed and its efficiency was shown.
Network training and test of the diagnostic subsystem were performed using the data sets obtained in a series of tests of hydraulic transmissions conducted at Promteplovoz diesel locomotive repair plant. The test results have shown that application of the proposed procedure ensures obtaining of correct result of the self-diagnostic subsystem operation.
References
- Ovchinnikov, V. M., Halimanchik, V. A., Nevzorov, V. V. (2006). Gidravlicheskie peredachi teplovozov. Gomel', 155.
- Zhukovytskyy, I. V., Kliushnyk, I. A., Ochkasov, O. B., Korenyuk, R. O. (2015). Information-measuring test system of diesel locomotive hydraulic transmissions. Science and Transport Progress. Bulletin of Dnipropetrovsk National University of Railway Transport, 5 (59), 53–65. doi: 10.15802/stp2015/53159
- Bodnar, B. Ye., Ochkasov, O. B., Koreniuk, R. O. Kliushnyk, I. A. (2017). Vykorystannia metodu vilnoho vybihu pry vyznachenni mekhanichnykh vtrat v hidravlichnykh peredachakh pry stendovykh vyprobuvanniakh. Problemy i perspektivy razvitiya zheleznodorozhnogo transporta: 77 Mezhdunarodnaya nauchno-prakticheskaya konferenciya. Dnipro, 16–17.
- Gaj, P., Jasperneite, J., Felser, M. (2013). Computer Communication Within Industrial Distributed Environment – a Survey. IEEE Transactions on Industrial Informatics, 9 (1), 182–189. doi: 10.1109/tii.2012.2209668
- Lee, J., Ardakani, H. D., Yang, S., Bagheri, B. (2015). Industrial Big Data Analytics and Cyber-physical Systems for Future Maintenance & Service Innovation. Procedia CIRP, 38, 3–7. doi: 10.1016/j.procir.2015.08.026
- Liu, K., Ma, Q., Gong, W., Miao, X., Liu, Y. (2014). Self-Diagnosis for Detecting System Failures in Large-Scale Wireless Sensor Networks. IEEE Transactions on Wireless Communications, 13 (10), 5535–5545. doi: 10.1109/twc.2014.2336653
- Sun, W., Jian, D., Yuan, Y., Yuan, Y. (2016). Fault Simulation of Electro-Hydraulic Servo System for Fault Self-Healing Based on Immune Principle. 2016 9th International Symposium on Computational Intelligence and Design (ISCID). doi: 10.1109/iscid.2016.2040
- Osipov, A. V., Kruchek, V. A., Kurilkin, D. N. (2012). Rabota gidrotransformatora gidroperedachi promyshlennogo lokomotiva v perekhodnyh processah i neustanovivshihsya rezhimah raboty. Izvestiya Peterburgskogo universiteta putey soobshcheniya, 2 (31), 142–148.
- Kondrat'eva, S. D., Semenenko, M. G. (2016). Modelirovanie slozhnyh sistem: sovremennye matematicheskie metody i prakticheskie aspekty. Fundamental'nye issledovaniya, 5, 43–46.
- Deyneko, A. A., Deyneko, Zh. V., Turuta, A. P., Bodyanskiy, E. V. (2014). Adaptivniy metod kombinirovannogo obucheniya-samoobucheniya neyro-fazzi system. Systemni tekhnolohiyi, 2, 145–153.
- Perova, I. G., Bodyanskiy, E. V. (2015). Neyro-fazzi sistema dlya zadach obrabotki medicinskih dannyh v situaciyah mnozhestva diagnozov. Bionika intellekta, 2, 86–89.
- Lei, Y., He, Z., Zi, Y., Hu, Q. (2007). Fault diagnosis of rotating machinery based on multiple ANFIS combination with GAs. Mechanical Systems and Signal Processing, 21 (5), 2280–2294. doi: 10.1016/j.ymssp.2006.11.003
- Zhang, J., Li, X., He, Z. (2010). Fault classification technique for power distribution network using adaptive network based fuzzy inference system. Proceedings of the CSEE, 30 (25), 87–93.
- Pakhomova, V. M., Dmitriyev, S. Yu. (2013). Rozrobka pidsystemy operatyvnoho prohnozuvannia prostoiv prybuvaiuchykh poizdiv na osnovi ANFIS-systemy. Informatsiyno-keruiuchi systemy na zaliznychnomu transport, 4, 46–55.
- Jang, J.-S. R. (1993). ANFIS: adaptive-network-based fuzzy inference system. IEEE Transactions on Systems, Man, and Cybernetics, 23 (3), 665–685. doi: 10.1109/21.256541
- Shmatov, G. P., Fomina, E. E. (2015). Matlab v primerah i zadachah. Tver', 172.
- Zhukovytskyy, I. V., Kliushnyk, I. A. (2017). Choice of the optimal parameters of measuring the shaft rotation frequency of the hydraulic transmission of the locomotive using microcontroller. Science and Transport Progress. Bulletin of Dnipropetrovsk National University of Railway Transport, 2 (68), 36–45. doi: 10.15802/stp2017/99945
- Kliushnyk, I. A., Koreniuk, R. O., Ochkasov, O. B. (2016). Pat. No. 116193 UA. Dvotypnyi tsyfrovyi mikroprotsesornyi takhometr. MPK G 01P 3/48. No. 12057; declareted: 28.11.2016; published: 10.05.2017, Bul. No. 9, 2.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2018 Ihor Zhukovyts’kyy, Ihor Kliushnyk
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.