Automatic construction of rational circuits of cut-out of leaf materials into shoe details

Authors

  • Тарас Миколайович Гаврилов Open International University of Human Development "Ukraine" Str. Lviv, 23, Kyiv, Ukraine, 03115, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2013.12366

Keywords:

Model, design, problem, methods, algorithms, locus, vector, cutout, program, CAD

Abstract

The article summarizes the theoretical foundations of formation of future computer-aided design system (CAD) of rational cutout patterns. It reveals the essence of CAD of rational cutout patterns: from requirements to design until the final results. The principles of design of a locus of a vector function of dense distribution of patterns provide the densest join without crossing of parts when cutting. The subtasks "Layout" and "Section" will uniformly fill the entire area of plate stock. Certain restrictions are imposed on the complement, which are determined by the properties of the plate. Finally, the subtask "Complement" is designed to ensure the optimum cutout plan and to form a rational cutout pattern. Overall, on the basis of the theoretical conclusions, we have developed a software package on computer-aided design of rational patterns of cutout of plate stock

Author Biography

Тарас Миколайович Гаврилов, Open International University of Human Development "Ukraine" Str. Lviv, 23, Kyiv, Ukraine, 03115

Postgraduate student

References

  1. Выгодский, М. Я. Справочник по высшей математике [Текст] / М. Я. Выгодский – М.: Государственное издательство технико-теоретической литературы, 1956. – 786 с.
  2. Коновал, B.П. Універсальний довідник взуттєвика [Текст] : навчальний посібник / B.П. Коновал, С.С. Гаркавенко, Л.Т. Свістунова; – К.: Лібра, 2005. – 967 c.
  3. Ноненков, И.П. САПР. Системы автоматизированного проектирования [Текст]. Кн. 9. Иллюстрированный словарь: Учебное пособие для технических вузов. / И.П. Ноненков. – Мн.: Высш. школа, 1988.
  4. Стоян, Ю.Г. Размещение геометрических объектов. [Текст] / Ю.Г. Стоян – К.: Наукова думка, 1975. – 175 с.
  5. Чупринка, В.И. Алгоритм построения опорной функции для плоских геометрических объектов [Текст] / В.И. Чупринка, В.С. Мурженко, П.В. Омельченко // Международный сборник научных трудов «Техническое регулирование: базовая основа качества товаров и услуг», Шахты: ЮРГУЭС, 2010. – С. 137 – 141.
  6. Чупринка, В.І. Побудова еквідистанти для плоского геометричного об’єкта [Текст] / В.І. Чупринка, К.А. Шлімович // Вісник ДАЛПУ,2000. – №1. – С. 83 – 85.
  7. Щербань, В.Ю. Математические модели в САПР оборудования и технологических процессов легкой и текстильной промышленности [Текст]. / В.Ю. Щербань, О.И. Волков, Ю.Ю. Щербань – К.: КНУТД, 2003.
  8. Щербань, В.Ю. САПР оборудования и технологических процессов легкой и текстильной промышленности [Текст] / В.Ю. Щербань, О.И. Волков, Ю.Ю. Щербань – К.: Бумсервис, 2004.
  9. SOFTWARE FOR LEATHER AND TEXTILE PRODUCTION [Электронный ресурс] / FootwearCAD. — Режим доступа : WWW/ URL: http://www.footwearcad.com/. – 2006. – Загл. с экрана.
  10. ComelzCaligola V.4.12 [Электронный ресурс] / Vip Software - Vip-Soft.— Режим доступа : WWW/ URL: http://vip-software.com/shoe-cad. – 2010. – Загл. с экрана.
  11. Vygodsky M.Ya. (1956). Spravochnik po vysshey matematike. M., Hosudarstvenyi izdatelskiy dom tekhnicheskoy I teoreticheskoy literatury, 786.
  12. Konoval V.P. Garkavenko S. S., Svistunova L.T. and others. (2005). Universalnyy dovidnyk vzutyevyka. Navchalnyy posibnyk. K., Libra, 967.
  13. Nonenkov I.P. (1988). SAPR. Sistemy avtomatizirovanogo proektirovvaniya: posobiye dlya technicheskikh vuzov. Kn. 9. The illustrated dictionary. Mn.: Vyssh. school,.
  14. Stoyan Yu.G. (1975). Razmeshcheniye geometricheskikh obyektov. K.: Naukova dumka, 175.
  15. Chuprinka V. I., Murzhenko V. S., Omelchenko P. V. (2010). Algoritm postroyeniya opornoy funktsii dlya ploskikh geometricheskikh obyektov. Mezhdunarodnyy zbornik nauchnykh trudov "Technicheskoe regulirovanie: bazovye osnovy kachestva materialov, tovarov I uslug", Shachty: YuRGUES, 137 – 141.
  16. Chuprinka V. I. Shlimovich K.A. (2000). Pobudova ekvidystanty dlya ploskykh geometricheskikh obyektiv. Visnik DALPU, 1, 83 – 85.
  17. Scherban V. Yu. Volkov O.I., Scherban Yu.Yu. (2003) Matematicheskiye modeli v SAPR oborudovaniya I technologicheskikh protsesov legkoy I tekstilnoy promyshlenosti. K.: KNUTD.
  18. Scherban V. Yu. Volkov O.I., Scherban Yu.Yu. (2004). SAPR oborudovaniya I technologicheskikh protsesov legkoy I tekstilnoy promyshlenosti. K.: Bumservice.
  19. http://www.footwearcad.com/.
  20. http://vip-software.com/shoe-cad.

Downloads

Published

2013-04-25

How to Cite

Гаврилов, Т. М. (2013). Automatic construction of rational circuits of cut-out of leaf materials into shoe details. Eastern-European Journal of Enterprise Technologies, 2(4(62), 26–30. https://doi.org/10.15587/1729-4061.2013.12366

Issue

Vol. 2 No. 4(62) (2013): Mathematics and cybernetics - fundamental and applied aspects

Section

Mathematics and Cybernetics - applied aspects

License

Copyright (c) 2014 Тарас Миколайович Гаврилов

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.