Intensification of texture formation in metals being electrodeposited at the force action along the texture axis

Authors

  • Олег Борисович Гірін Ukrainian State University of Chemical Technology Prospekt Gagarina, 8, Dnipropetrovsk, Ukraine 49005, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2013.12394

Keywords:

Texture, metal being electrodeposited, centrifugal force

Abstract

The aim of the work was an experimental verification of the reliability of the discovered phenomenon of phase formation through a stage of liquid state in metals being electrodeposited. For this purpose the investigations of features of the formation of crystallographic texture in metals (copper and nickel) being electrodeposited at the force action along its axis were performed. As a result the effect of intensification of the texture formation process in metals being electrodeposited at the influence of centrifugal force directed along the texture axis was found.

The comparative analysis of the degree of texture perfection of electrodeposited metals obtained at different directions of the force action during their phase formation was done. It was found that both the suppression of the texture formation process (at the force influence opposite its axis) and the intensification of the texture formation process (at the force action along the texture axis) occur in metals being electrodeposited at relatively low overloads. The further force action on the metals being electrodeposited during their phase formation causes only minor change of the degree of their texture perfection.

It was discovered that the action of the centrifugal force in the direction opposite to the texture axis results in the more significant influence on the texture formation process in metals being electrodeposited in comparison with the force action along the texture axis. The obtained results prove the reliability of the phenomenon of phase formation through a stage of liquid state in metals being electrodeposited

Author Biography

Олег Борисович Гірін, Ukrainian State University of Chemical Technology Prospekt Gagarina, 8, Dnipropetrovsk, Ukraine 49005

Doctor of Science (Engineering), Professor

Vice-Rector of Science, Head of the Department

Department of Materials Science

References

  1. Гирин, О. Б. Подавление текстурообразования электроосаждаемых металлов при силовом влиянии противоположно оси текстуры [Текст] / О. Б. Гирин // Восточно-Европейский журнал передовых технологий. – 2013. – № 1/5. – С. 21-25.
  2. Girin, O. B. Phenomenon of Precipitation of Metal Being Electrodeposited, Occurring via Formation of an Undercooled Liquid Metal Phase and its Subsequent Solidification. Part 1. Experimental Detection and Theoretical Grounding [Text] / O. B. Girin // Materials Development and Processing. – Weinheim : WILEY-VCH, 2000. – V. 8. – P. 183-188.
  3. Girin, O. B. Phenomenon of Precipitation of Metal Being Electrodeposited, Occurring via Formation of an Undercooled Liquid Metal Phase and its Subsequent Solidification. Part 2. Experimental Verification [Text] / O. B. Girin // Materials Development and Processing. – Weinheim : WILEY-VCH, 2000. – V. 8. – P. 189-194.
  4. Girin, O. B. Phase and Structure Formation of Metallic Materials Electrodeposited via a Liquid State Stage: New Experimental Proof [Text] / O. B. Girin // Defect and Diffusion Forum. – 2010. – Vol. 303-304. – P. 99-105.
  5. Girin, O. B. Phase Formation through a Stage of Liquid State in Metallic Materials being Electrodeposited: Recent Experimental Proofs [Text] / O. B. Girin // International Journal of Material Science. – 2012. – V. 2, №4. – P. 108-118.
  6. Вассерман, Г. Текстуры металлических материалов [Текст] : монография / Г. Вассерман, И. Гревен ; пер. с нем. В. Я. Агароника. – 2-е изд., перераб. и доп. – М. : Металлургия, 1969. – 654 с.
  7. Гирин, О. Б. Увеличение плотности электроосаждаемых металлов под действием центробежной силы [Текст] / О. Б. Гирин, И. Д. Захаров // Восточно-Европейский журнал передовых технологий. – 2011. – № 5/5. – С. 4-7.
  8. Способ рентгеновского дифрактометрического анализа текстурованных материалов [Текст] : пат. 1629828 Рос. Федерация: МКИ5 G 01 N 23/20 / Гирин О. Б., Воробьев Г. М., ; заявитель и патентообладатель Днепропетровский металлург. ин-т. – №4618592/25 ; заявл. 12.12.88 ; опубл. 23.02.91, Бюл. № 7. – 2 с.
  9. Girin, O. B. Nonconventional X-ray Diffraction Techniques for Coating Characterization [Text] / O. B. Girin // Solidification 1998. – Warrendale : The Minerals, Metals & Materials Society, 1998. – P.161-169.
  10. Girin, O. B. Texture of Electrodeposited Copper Coatings as Related to their Substructure, Granular Structure and Surface Morphology [Text] / O. B. Girin, Yu. O. Proshenko, E. P. Kalinushkin // Textures and Microstructures. – 2000. – V. 34, № 2-3. – P. 171-179.
  11. Вишняков, Я. Д. Теория образования текстур в металлах и сплавах [Текст] : монография / Я. Д. Вишняков, А. А. Бабарэко, С. А. Владимиров, И. В. Эгиз ; под ред. Н. В. Агеева. – М. : Наука, 1979. – 343 с.
  12. Girin, O. B. Texture Development and Texture/Property Relations in Electrodeposits [Text] / O. B. Girin // Defect Structure, Morphology and Properties of Deposits. – Warrendale : TMS, 1995. – P. 103-114.
  13. Girin, O. B. (2013) Vostochno-Evropeiskii Jurnal Peredovykh Tekhnologii – Eastern-European Journal of Enterprise Technologies, no.1/5, pp. 21-25.
  14. Girin, O. B. (2000) Materials Development and Processing, Weinheim : WILEY-VCH, vol.8, pp. 183-188.
  15. Girin, O. B. (2000) Materials Development and Processing, Weinheim : WILEY-VCH, vol.8, pp. 189-194.
  16. Girin, O. B. (2010) Defect and Diffusion Forum, vol.303-304, pp. 99-105.
  17. Girin, O. B. (2012) International Journal of Material Science, vol.2, №4, pp. 108-118.
  18. Wassermann, G., Grewen, J. (1969) Tekstury metallicheskih materialov (Textures of the metallic materials). Moscow, 654.
  19. Girin, O. B., Zakharov, I. D. (2011) Vostochno-Evropeiskii Jurnal Peredovykh Tekhnologii – Eastern-European Journal of Enterprise Technologies, no.5/5, pp. 4-7.
  20. Girin, O. B., Vorob’ev, G. V. (1991) A method for X-ray diffractometry analysis of textured materials. The Patent of Russia 1,629,828. 1991-02-23.
  21. Girin, O. B. (1998) Solidification, Warrendale: The Minerals, Metals & Materials Society, 1998, pp. 161-169.
  22. Girin, O. B., Proshenko, Yu. O., Kalinushkin E.P. (2000) Textures and Microstructures, vol.34, №2-3, pp. 171-179.
  23. Vishniakov, Ia. D., Babareko, A. A., Vladimirov, S. A., Egiz, I. V. (1979) Teoriia obrazovaniia tekstur v metallah i splavah (The theory of formation of textures in metals and alloy materials). Moscow, 343 p.
  24. Girin, O. B. (1995) Defect Structure, Morphology and Properties of Deposits, Warrendale : TMS, pp. 103-114.

Downloads

Published

2013-04-25

How to Cite

Гірін, О. Б. (2013). Intensification of texture formation in metals being electrodeposited at the force action along the texture axis. Eastern-European Journal of Enterprise Technologies, 2(5(62), 9–13. https://doi.org/10.15587/1729-4061.2013.12394

Issue

Vol. 2 No. 5(62) (2013): The applied physics and materials technology

Section

Applied physics

License

Copyright (c) 2014 Олег Борисович Гірін

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.