Increase of resource of steam turbine

Authors

  • Тетяна Миколаївна Пугачова Ukrainian Engineering and Pedagogical Academy Universitetckaya str., 16, Kharkov, 61003, Ukraine
  • Ігор Миколайович Низинський Ukrainian Engineering and Pedagogical Academy Universitetckaya str., 16, Kharkov, 61003, Ukraine
  • Ігор Анатолійович Капура Pervomaiskiy Technology Institute of national university shipbuilding was named after admirala Makarova. Odesskaya str.,107, Pervomaisk, Nikolaiv region, 55200, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2013.12422

Keywords:

Steam turbine, thermal stresses state, creep and long-term durability, low-cycle fatigue

Abstract

A significant part of heat-mechanic equipment has already developed standard and extended resources. The scheduled repairs are reduced and overhaul periods are increased. Operation of power units in peak load with a large number of start-stops leads to their rapid wear and cracking in high temperature zones of elements of turbo-installations. Cracks in the rotors cause the possibility of further emergency operation. The economic situation at present cannot provide new equipment. There is a need to develop measures to increase the resource of a steam turbine.

The following measures are suggested to increase the resource of the steam turbine: change of operative conditions; preliminary heating of the rotor; removal of the damaged metal layer; change of the thermal circuit; reconstruction of thermal grooves

Author Biographies

Тетяна Миколаївна Пугачова, Ukrainian Engineering and Pedagogical Academy Universitetckaya str., 16, Kharkov, 61003

Docent

Department of power engineering and energy saving

Ігор Миколайович Низинський, Ukrainian Engineering and Pedagogical Academy Universitetckaya str., 16, Kharkov, 61003

Student

Department of power engineering and energy saving

Ігор Анатолійович Капура, Pervomaiskiy Technology Institute of national university shipbuilding was named after admirala Makarova. Odesskaya str.,107, Pervomaisk, Nikolaiv region, 55200

PhD

 

Department of thermal engineering and mechanical-engineering technology

References

  1. Костюк, А. Г. Длительная прочность роторов паровых турбин в зоне концентрации напряжений [Текст] / А. Г. Костюк // Теплоэнергетика. – 2006. – № 10. – С. 9-15.
  2. Прочность паровых турбин: [моногр.] [Текст] /. Шубенко-Шубин, Л. А. и др.; под ред. Шубенко-Шубина, Л. А. – 2-е изд., перераб. и доп. – М.: Машиностроение, 1973. – С. 456.
  3. Костюк, А. Г. Прочность цельнокованых роторов турбин мощностью 200, 300 и 800 МВт производства ЛМЗ при длительном статическом нагружении / А. Г. Костюк, А. Д. Трухний // Теплоэнергетика. – 2004. – № 10. – С. 45-52.
  4. Костюк, А. Г. О прочности цельнокованых роторов при нестационарных тепловых режимах. [Текст] /А. Г. Костюк, А. Д. Трухний, В. Н. Мичулин// Теплоэнергетика. – 1974. – № 8. – С. 73-76.
  5. Winne D. Application of the Griffith – Irwin theory of crack propagation of the bursting behaviour of disks, including analytical and experimental studies. [Текст] / D. Winne, B. Wundt // Trans. ASME. – 1958. – № 8. – Р. 1643-1668.
  6. Significant progress in the development of large turbine and generator rotors. [Текст] / C. Boyle, R. Curran, D. De Forest, D. Newhouse // Proc. Amer. Soc. Test. Mater. – 1962. – 1175p.
  7. Lape E. On relations between various laboratory fracture test. [Текст] / Е. Lape, J. Lubulan // Trans. ASME. – 1956. – № 4. – Р. 823-835.
  8. Ashton R. The effect of porosity on 5086 – H116 aluminum alloy welds. [Текст] / R. Ashton, J. Wesley, G. Duxon // Welding J. – 1975. – № 3. – Р. 95-98.
  9. Сухинин, В. П. Исследование напряженно-деформированного состояния и термоциклической стойкости ротора среднего давления турбины К-200-130 ЛМЗ. [Текст] / В. П. Сухинин, Т. Н. Пугачева // Вестн. Нац. техн. ун-та «ХПИ»: темат. вып. : сб. науч. тр. – Х., 2008. – Вып. 6: Энергетические и теплотехнические процессы и оборудование. – С. 102-107.
  10. Пугачева, Т. Н. Анализ особенностей состояния высокотемпературных роторов и факторов, влияющих на их работоспособность и ресурс [Текст] / Т. Н. Пугачева // Вестн. Нац. техн. ун-та «ХПИ» : темат. вып. : сб. науч. тр. – Х., 2009. – Вып. 3: Энергетические и теплотехнические процессы и оборудование. – С. 92-97.
  11. Kostyuk A.G. (2006) Long-term strength steam turbine rotors in the stress concentration zone. Thermal, № 10, 9-15.
  12. LA Shubenko-Shubin and others, ed. LA Shubenko-Shubin. - 2nd ed., Rev. and add. (1973). Strength of steam turbines [monograph.]. - Mashinostroenie,. - 456.
  13. AG Kostyuk (2004)Strength one-piece rotor turbine capacity of 200, 300 and 800 MW of LMZ prolonged static loading / AG Kostyuk, AD Truhny / / Thermal. № 10. - 45-52.
  14. AG Kostyuk (1974) On the strength of one-piece rotors transient thermal conditions / AG Kostyuk, AD Truhny, VN Michulin / / Thermal. № 8. 73-76.
  15. Winne D. (1958) Application of the Griffith – Irwin theory of crack propagation of the bursting behaviour of disks, including analytical and experimental studies. / D. Winne, B. Wundt // Trans. ASME. № 8. 1643-1668.
  16. Significant progress in the development of large turbine and generator rotors. (1962)/ C. Boyle, R. Curran, D. De Forest, D. Newhouse // Proc. Amer. Soc. Test. Mater., 1175
  17. Lape E. (1956)On relations between various laboratory fracture test. / Е. Lape, J. Lubulan // Trans. ASME., № 4, 823-835.
  18. Ashton R. (1975) The effect of porosity on 5086 – H116 aluminum alloy welds. / R. Ashton, J. Wesley, G. Duxon // Welding J. № 3. – 95-98.
  19. Sukhinin, V. P. (2008) Research of the stress-strain state and thermal cycling resistance rotor medium-pressure turbine K-200-130 LMZ. / VP Sukhinin, TN Pugachev / / Vestn. Nat. tech. University "KPI": temat. no. : Sat. scientific. mp. – H. Issue. 6: Energy and thermal processes and equipment. 102-107.
  20. Pugacheva, T. N. (2009) Analysis of features state of high rotor and the factors affecting their performance and service life / TN Pugachev / / Vestn. Nat. tech. University "KPI": temat. no. : Sat. scientific. mp. - H. - Issue. 3: Energy and thermal processes and equipment. - 92-97.

Downloads

Published

2013-04-25

How to Cite

Пугачова, Т. М., Низинський, І. М., & Капура, І. А. (2013). Increase of resource of steam turbine. Eastern-European Journal of Enterprise Technologies, 2(8(62), 11–14. https://doi.org/10.15587/1729-4061.2013.12422

Issue

Vol. 2 No. 8(62) (2013): Energy-saving technologies and equipment

Section

Energetics

License

Copyright (c) 2014 Тетяна Миколаївна Пугачова, Ігор Миколайович Низинський, Ігор Анатолійович Капура

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.