Research of temperature fields of glass-worked furnace

Authors

  • Анатолій Іванович Жученко National University of Ukraine "Kyiv Polytechnic Institute" Peremogy ave, 37, Kyiv, 03056, Ukraine
  • Виталій Виталій Цапар National University of Ukraine "Kyiv Polytechnic Institute" Peremogy ave, 37, Kyiv, 03056, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2013.12433

Keywords:

Glass-worked furnace, temperature field, mathematical model

Abstract

The article provides the graphics of temperature distribution in a glass-worked furnace and considers the study of the temperature fields. The main goal is to analyze the temperature fields, constructed on the basis of a mathematical model. With the help of the software Matlab, the temperature distribution of liquid glass was built in the real sizes of the glass-worked furnace. The obtained temperature fields provide the conclusions about the dynamics of the distribution of temperature in the liquid glass layer and design various technological situations without intervention into the process. The results of the analysis of temperature fields suggest that to obtain the liquid glass of high quality it is enough to keep the temperature of the liquid glass at a given level at point of thermal peak, the coordinates of which can be determined from the given graphics. The results of the study can be used to determine main points of temperature measurement, and on their basis to develop a control system of glassmaking

Author Biographies

Анатолій Іванович Жученко, National University of Ukraine "Kyiv Polytechnic Institute" Peremogy ave, 37, Kyiv, 03056

Professor

Department of Chemical Production Automation

Виталій Виталій Цапар, National University of Ukraine "Kyiv Polytechnic Institute" Peremogy ave, 37, Kyiv, 03056

Assistant

Department of Chemical Production Automation

References

  1. Гинзбург, Д. Г. Стекловаренные печи [Текст] / Д. Г. Гинзбург. — М. : Изд-во литературы по строительству, 1967 . — 214 с.
  2. Дзюзер, В. Я. Математическая модель стекловаренной печи с подковообразным направлением пламени [Текст] / В. Я. Дзюзер, B. C. Швыдкий, В. Б. Кутьин // Стекло и керамика — 2004. —№ 10 .— С. 8—12
  3. Югов, А. М. Определение температурных полей на контактирующих поверхностях внешнего контура агрегата стекловаренной печи [Текст] / А. М. Югов, В. И. Москаленко, А. В. Ихно, Д. А. Юдкало // Вісник донбаської національної академії будівництва і архітектури. — 2009. —№ 6(80)
  4. Loch, H. Mathematical simulation in glass technology [Текст] / H. Loch, D. Krause — Springer, 2002.
  5. Жученко, А. І. Моделювання теплового режиму скловарної печі [Текст] / А. І. Жученко, В. О. Романенко // Хімічна інженерія, екологія та ресурсозбереження.— 2011. —№1(11)
  6. Beerkens, R. G. C. Analysis of industrial glass melting processes [Текст] / R. G. C. Beerkens // Glass researcher. — 2003.
  7. Chmielewski, D. J. On the theory of optimal sensor placement [Текст] / D. J. Chmielewski, T. Palmer, V. Manousiousthakis // AIChE Journal. — 2002. — №48(5). — p. 1001—1012.
  8. Kuhn, W. S. Mathematical modeling of batch melting in glass tanks [Текст] / W. S. Kuhn // Mathematical simulation in glass technology. — 2002. — p. 73—137.
  9. Stephanopoulos, G. Chemical process control: An introduction to theory and practice [Текст] / G. Stephanopoulos. — Prentice Hall, 1984.
  10. Shelby, J. E. Introduction to Glass Science and Technology [Текст] / J. E. Shelby. — The Royal Society of Chemistry, 2005.
  11. Hynzburh, D. H. Glass furnaces. [Steklovarennie pechi] .1967 , 214 s.
  12. Dziuzer, V. Ia. Mathematical model of a glass furnace with horseshoe-fired [Matematycheskaia model steklovarennoi pechy s podkovoobraznim napravlenyem plameny]. Steklo y keramyka ,2004,№ 10,pp. 8—12
  13. Iuhov, A. M. Determination of temperature fields on the contacting surfaces of the external contour of the unit glass furnace [Opredelenye temperaturnikh polei na kontaktyruiushchykh poverkhnostiakh vneshneho kontura ahrehata steklovarennoi pechy] Visnyk donbaskoi natsionalnoi akademii budivnytstva i arkhitektury,2009, № 6(80)
  14. H. Loch and D. Krause, editors. Mathematical simulation in glass technology. Springer, 2002.
  15. Zhuchenko, A. I. Modelling the thermal regime furnace [Modeliuvannia teplovoho rezhymu sklovarnoi pechi]. Khimichna inzheneriia, ekolohiia ta resursozberezhennia.— 2011. —#1(11)
  16. R. G. C. Beerkens. Analysis of industrial glass melting processes. submitted to: Glass researcher, 2003.
  17. D.J. Chmielewski, T. Palmer, and V. Manousiousthakis. On the theory of optimal sensor placement. AIChE Journal, 48(5): 1001-1012, May 2002.
  18. W.S. Kuhn. Mathematical modeling of batch melting in glass tanks, chapter 2.2, pages 73-137. in Mathematical simulation in glass technology. Springer, 2002.
  19. G. Stephanopoulos. Chemical process control: An introduction to theory and practice. Prentice Hall, 1984.
  20. J.E. Shelby. Introduction to Glass Science and Technology. The Royal Society of Chemistry 2005.

Downloads

Published

2013-04-25

How to Cite

Жученко, А. І., & Цапар, В. В. (2013). Research of temperature fields of glass-worked furnace. Eastern-European Journal of Enterprise Technologies, 2(8(62), 49–51. https://doi.org/10.15587/1729-4061.2013.12433

Issue

Vol. 2 No. 8(62) (2013): Energy-saving technologies and equipment

Section

Energy saving in industry

License

Copyright (c) 2014 Анатолій Іванович Жученко, Виталій Виталій Цапар

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.