Substantiation of parameters and operational modes of air solar collector
DOI:
https://doi.org/10.15587/1729-4061.2018.132090Keywords:
air solar collector, transparent coating, temperature field, heat flow, heat exchange, heat lossAbstract
We developed a new design of an air solar collector for a fruit dryer including double glazing and a selective surface made of a thin metal substrate with inlet and outlet openings on its bottom. We established that it is necessary to use a glass with a heat-reflecting coating of a solid K-glass type with a radiation coefficient ε=0.1...0.15 for a double-glazing substrate. This makes it possible to obtain the widest possible spectrum of direct sunlight rays that irradiate a surface of an absorbing plate and reduces a diffuse component of radiation, which ensures an increase in efficiency of a solar collector.
We determined regularities of the influence of a change in flow speed of a heat-transfer agent, a temperature drop, and radiation intensity on power of a solar collector. We developed a model of heat exchange processes occurring in an air solar collector. We presented the methodology for estimation of heat loss of an air solar collector with passive use of solar energy.
We established that energy illumination E, which is from 377 to 1,223 W/m2, affects heat output of an air collector Q=117...480 W significantly. We established that a use of a non-selective absorbing surface in an air solar collector with a low insolation level E=377 W/m2 makes it possible to increase efficiency by η=70.7 % more for selective, and at a large energy illumination of E=1,000 W/m2, on the contrary small η=54.6 %. This makes it possible to explain how redistribution of the ratio of the maximum current thermal power (NSC=48.8...100 W) and efficiency of an air solar collector occurs.
One can use the obtained results in development and improvement of technical means for fruit drying to improve technological and energy efficiency of the process.
References
- Englmair, G., Dannemand, M., Johansen, J. B., Kong, W., Dragsted, J., Furbo, S., Fan, J. (2016). Testing of PCM Heat Storage Modules with Solar Collectors as Heat Source. Energy Procedia, 91, 138–144. doi: 10.1016/j.egypro.2016.06.189
- Horta, P., Osório, T. (2014). Optical Characterization Parameters for Line-focusing Solar Concentrators: Measurement Procedures and Extended Simulation Results. Energy Procedia, 49, 98–108. doi: 10.1016/j.egypro.2014.03.011
- Chamoli, S. (2013). Exergy analysis of a flat plate solar collector. Journal of Energy in Southern Africa, 24 (3), 8–13.
- NASA Surface meteorology and Solar Energy. Available at: http://eosweb.larc.nasa.gov
- Vishwakarma, D., Kale, J. (2017). Experimental study and analysis of solar air heater using of various inlet temperatures. International Journal of Research, 5 (10), 76–80. doi: 10.5281/zenodo.1039619
- Sabiha, M. A., Saidur, R., Mekhilef, S., Mahian, O. (2015). Progress and latest developments of evacuated tube solar collectors. Renewable and Sustainable Energy Reviews, 51, 1038–1054. doi: 10.1016/j.rser.2015.07.016
- Solar energy – Solar thermal collectors – Test methods. International Standard. ISO/FDIS 9806:2013(E).
- Syvoraksha, V. Yu. et. al. (2003). Teplovi rozrakhunky heliosystem. Dnipropetrovsk: Vyd-vo DNU, 132.
- Daffi, Dzh., Bekman, U. A. (1987). Teplovye processy s ispol'zovaniem solnechnoy energii. Moscow: Mir, 420.
- Duffie J. А., Beckmаn W. А. Solar engineering of thermal processes. John Wiley & Sons, 2013. 910 p. doi: 10.1002/9781118671603
- ASHRAE Standard 93-1986 (RA 91) Metods of Testing to Determine The Thermal Performance of Solar Collektors, American Society of Heating, Refrigerating and Air-Conditioning Engineers Inc (2002). Atlanta, USA.
- Hematian, A., Ajabshirchi, Y., Bakhtiari, A. (2012). Experimental analysis of flat plate solar air collector efficiency. Indian Journal of Science and Technology, 5 (8), 3183–3187.
- Shemelin, V., Matuska, T. (2017). Detailed Modeling of Flat Plate Solar Collector with Vacuum Glazing. International Journal of Photoenergy, 2017, 1–9. doi: 10.1155/2017/1587592
- Vega, E. V., Noh-Pat, F. (2014). Validation of the Simulation of Solar Air Collector Prototypes. Energy Procedia, 57, 2295–2304. doi: 10.1016/j.egypro.2014.10.237
- Ondieki, H. O., Koech, R. K., Tonui, J. K., Rotich, S. K. (2014). Mathematical Modeling Of Solar Air Collector With a Trapezoidal Corrugated Absorber Plate. International Journal of Scientific & Technology Research, 3 (8), 51–56.
- Labai, V. Y. (2004). Teplomasoobmin. Lviv: Triada Plius, 260.
- Miheev, M. A., Miheeva, I. M. (1977). Osnovy teploperedachi. Moscow: Energiya, 344.
- Fokin, V. M., Boykov, G. P. Vidin, Yu. V. (2005). Osnovy energosberezheniya v voprosah teploobmena. Moscow: Mashinostroenie, 192.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2018 Serhiy Korobka, Mykhailo Babych, Roman Krygul, Andriy Zdobytskyj
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.