Development of the method of exposure control of grain drying in hightemperature dryers
DOI:
https://doi.org/10.15587/1729-4061.2018.133607Keywords:
grain drying, drying control, drying exposure, drying kineticsAbstract
When studying the kinetics of high-temperature wheat drying, it is found that at the end of the constant drying period, there is a sharp increase in the grain heating temperature. The temperature jump occurs due to the grain surface dehydration, when the average relative moisture is close to standard and makes 15...16 %. Based on this regularity, the method of exposure control of grain drying in high-temperature dryers without using continuous-flow moisture meters is developed.
The method is based on simultaneous control of the material heating temperature by temperature sensors over the entire length of the drying chamber. The measured values from the temperature sensors are transmitted to the microcontroller in order to periodically approximate them with the cubic polynomial and find the derivative of the second-order function.
The microcontroller is programmed to determine the second-order critical point – the location of the grain, having standard moisture. The obtained result is compared with the maximum length of the grain path along the drying chamber in order to subsequently influence the discharger performance.
The developed method of exposure control of grain drying in high-temperature dryers provides the necessary time for the temperature effect of the drying agent on the grain, process quality and reduction of energy consumption for grain drying. On the basis of this method, the drying process without the use of expensive continuous-flow grain moisture meters operating with a high measurement error is automated.
References
- Wheat production in the world. Countries producing wheat. Available at: http://ab-centre.ru/page/proizvodstvo-pshenicy-v-mire-strany-proizvoditeli-pshenicy
- Information on holding a conference in Anapa, Krasnodar Territory on June 11-15, 2012. Available at: http://www.drying-committee.ru/dl.php?f=203
- RUSSIA IN FIGURES. 2017, responsible for the issue: N. S. Bugakova I. V. Voronina T. A. Mikhailova, Brief statistical compilation, June 30, 2017, Printed in the printing house "August Borg" 107497, Moscow, ul. Amurskaya, 5, p. 2.
- Perfection of the constructions of active ventilation bins. Available at: http://kgau.ru/new/all/konferenc/konferenc/2009/50.doc%D1%97
- Krichevsky, E. S., Benzar, V. K., Venediktov, M. V. et. al.; Krichevsky, E. S. (Ed.) (1980). Theory and practice of rapid moisture control of solid and liquid materials. Мoscow: Energy, 240.
- Fundamentals of grain drying. Available at: http://www.knowledgebank.irri.org/step-by-step-production/postharvest/drying/drying-basics/drying-process/fundamentals-of-grain-drying
- Morais, S. J. da S., Devilla, I. A., Ferreira, D. A., Teixeira, I. R. (2013). Modelagem matemática das curvas de secagem e coeficiente de difusão de grãos de feijão-caupi (Vigna unguiculata (L.) Walp.). Revista Ciência Agronômica, 44 (3), 455–463. doi: 10.1590/s1806-66902013000300006
- Coradi, P. C., Fernandes, C. H. P., Helmich, J. C. (2016). Adjustment of mathematical models and quality of soybean grains in the drying with high temperatures. Revista Brasileira de Engenharia Agrícola e Ambiental, 20 (4), 385–392. doi: 10.1590/1807-1929/agriambi.v20n4p385-392
- Volgusheva, N. V. (2016). Kinetics of drying grain materials in the microwave field. Holodil'naya tekhnika i tekhnologiya, 52 (1), 62–65. Available at: https://doaj.org/article/292517d0aad4490b8d20e039d86dcfb1
- Rosa, D. P., Cantú-Lozano, D., Luna-Solano, G., Polachini, T. C., Telis-Romero, J. (2015). Mathematical modeling of orange seed drying kinetics. Ciência e Agrotecnologia, 39 (3), 291–300. doi: 10.1590/s1413-70542015000300011
- Reis, R. C. dos, Devilla, I. A., Ascheri, D. P. R., Servulo, A. C. O., Souza, A. B. M. (2012). Kinetics of drying of basil leaves (Ocimum basilicum L.) in the infrared. Revista Brasileira de Engenharia Agrícola e Ambiental, 16 (12), 1346–1352. doi: 10.1590/s1415-43662012001200012
- Grain moisture sensor in the flow. Available at: http://agrovektor.ru/art/1353-datchik-vlazhnosti-zerna-v-potoke.html
- Han, F., Zuo, C., Wu, W., Li, J., Liu, Z. (2012). Model Predictive Control of the Grain Drying Process. Mathematical Problems in Engineering, 2012, 1–12. doi: 10.1155/2012/584376
- Afonkina, V., Zakhakhatnov, V., Mayerov, V., Popov, V. (2016). On the question of process control combined grain drying. Mordovia University Bulletin, 26 (1), 032–039. doi: 10.15507/0236-2910.026.201601.032-039
- Zhang, L., Cui, H., Li, H., Han, F., Zhang, Y., Wu, W. (2013). Parameters Online Detection and Model Predictive Control during the Grain Drying Process. Mathematical Problems in Engineering, 2013, 1–7. doi: 10.1155/2013/924698
- Chen, C., Wu, C., Li, C. (2017). Design of Resistive Grain Moisture On-line Detector. MATEC Web of Conferences, 136, 02005. doi: 10.1051/matecconf/201713602005
- SRT AIST 10.2-2010. Grain cleaning machines and aggregates, grain cleaning and drying complexes. Methods for assessing performance. Instead of SRT AIST 10.2-2004 and Enter. from 2011.04.15 (2011). Moscow, 48.
- Klenin, N. I., Kiselev, S. N., Levshin, A. G. (2008). Agreecultural machines. Agreecultural equipment. Moscow: Colossus, 816.
- Volkhonov, M. S., Gabalov, S. L., Jabbarov, I. A., Volkhonov, V. М. (2016). Substantiation of the method of control and management of the drying end of capillary – porous colloidal materials. Proceedings of the Kostroma State Agricultural Academy, 84, 56–65.
- Zavarygin, V. M. (1991). Numerical methods. Мoscow: Education, 250.
- Bronshtein, I. N., Semendyaev, K. A. (1967). Handbook on Mathematics. Moscow: Nauka, 84.
- Volkhonov, M. S., Polozov, S. A., Zyrin, I. S., Gabalov, S. L., Dzhumaliev, K. A. (2016). The basic principles of creating a system for automated control of the drying process in a mine air drier. Actual problems of science in the agro-industrial complex. Collection of articles of the 66th scientific-practical conference of the State Agricultural Academy, 85–90.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2018 Mikhail Volkhonov, Igor Jabbarov, Valery Soldatov, Ivan Smirnov
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.